mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 03:03:05 +00:00
214a986f13
Drive CTRL_SLEEP_MOCI# high at boot (SPL) using a GPIO hog, this signal may be used to control some power-rails on the carrier board, therefore it should be set to high when the module is booting. To do this as early as possible is generally a good idea and the issue was noticed on the Yavia carrier board where it is needed to power the I2C EEPROM on the carrier board. Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
190 lines
2.4 KiB
Text
190 lines
2.4 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright 2022 Toradex
|
|
*/
|
|
|
|
#include "imx8mp-u-boot.dtsi"
|
|
|
|
/ {
|
|
firmware {
|
|
optee {
|
|
compatible = "linaro,optee-tz";
|
|
method = "smc";
|
|
};
|
|
};
|
|
|
|
wdt-reboot {
|
|
compatible = "wdt-reboot";
|
|
bootph-pre-ram;
|
|
wdt = <&wdog1>;
|
|
};
|
|
};
|
|
|
|
&{/aliases} {
|
|
eeprom0 = &eeprom_module;
|
|
eeprom1 = &eeprom_carrier_board;
|
|
eeprom2 = &eeprom_display_adapter;
|
|
};
|
|
|
|
&clk {
|
|
bootph-all;
|
|
bootph-pre-ram;
|
|
/delete-property/ assigned-clocks;
|
|
/delete-property/ assigned-clock-parents;
|
|
/delete-property/ assigned-clock-rates;
|
|
|
|
};
|
|
|
|
&crypto {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&gpio1 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&gpio2 {
|
|
bootph-pre-ram;
|
|
|
|
regulator-ethphy {
|
|
gpio-hog;
|
|
gpios = <20 GPIO_ACTIVE_HIGH>;
|
|
line-name = "reg_ethphy";
|
|
output-high;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_eth>;
|
|
};
|
|
};
|
|
|
|
&gpio3 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&gpio4 {
|
|
bootph-pre-ram;
|
|
|
|
ctrl-sleep-moci-hog {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&gpio5 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&i2c1 {
|
|
bootph-pre-ram;
|
|
|
|
eeprom_module: eeprom@50 {
|
|
compatible = "i2c-eeprom";
|
|
pagesize = <16>;
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&i2c3 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&i2c4 {
|
|
/* EEPROM on display adapter (MIPI DSI Display Adapter) */
|
|
eeprom_display_adapter: eeprom@50 {
|
|
compatible = "i2c-eeprom";
|
|
pagesize = <16>;
|
|
reg = <0x50>;
|
|
};
|
|
|
|
/* EEPROM on carrier board */
|
|
eeprom_carrier_board: eeprom@57 {
|
|
compatible = "i2c-eeprom";
|
|
pagesize = <16>;
|
|
reg = <0x57>;
|
|
};
|
|
};
|
|
|
|
&pca9450 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&pinctrl_ctrl_sleep_moci {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&pinctrl_i2c1 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&pinctrl_usdhc2_pwr_en {
|
|
bootph-pre-ram;
|
|
u-boot,off-on-delay-us = <20000>;
|
|
};
|
|
|
|
&pinctrl_uart3 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&pinctrl_usdhc2_cd {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&pinctrl_usdhc2 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&pinctrl_usdhc3 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&pinctrl_wdog {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
®_usdhc2_vmmc {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&sec_jr0 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&sec_jr1 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&sec_jr2 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&uart3 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&usdhc1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usdhc2 {
|
|
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
|
|
assigned-clock-rates = <400000000>;
|
|
assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
|
|
sd-uhs-ddr50;
|
|
sd-uhs-sdr104;
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&usdhc3 {
|
|
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
|
|
assigned-clock-rates = <400000000>;
|
|
assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&wdog1 {
|
|
bootph-pre-ram;
|
|
};
|