mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 03:03:05 +00:00
94c30f9c8f
As explained in commit 3bedbcc3aa ("arm: mvebu: a38x: serdes: Don't
overwrite read-only SAR PCIe registers") it is required to set Maximum Link
Width bits of PCIe Root Port Link Capabilities Register depending of number
of used serdes lanes. As this register is part of PCIe address space and
not serdes address space, move it into pci_mvebu.c driver.
Read number of PCIe lanes from DT property "num-lanes" which is used also
by other PCIe controller drivers in Linux kernel. If this property is
absent then it defaults to 1. This property needs to be set to 4 for every
mvebu board which use PEX_ROOT_COMPLEX_X4 or PEX_BUS_MODE_X4.
Enabling of PCIe port needs to be done afer all registers in PCIe address
space are properly configure. For this purpose use new mvebu-reset driver
(part of system-controller) and remove this code from serdes code.
Because some PCIe ports cannot be enabled individually, it is required to
first setup all PCIe ports and then enable them.
This change contains also all required "num-lanes" and "resets" DTS
properties, to make pci_mvebu.c driver work correctly.
Signed-off-by: Pali Rohár <pali@kernel.org>
323 lines
9.5 KiB
Text
323 lines
9.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell Armada XP family SoC
|
|
*
|
|
* Copyright (C) 2012 Marvell
|
|
*
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*
|
|
* Contains definitions specific to the Armada XP MV78260 SoC that are not
|
|
* common to all Armada XP SoCs.
|
|
*/
|
|
|
|
#include "armada-xp.dtsi"
|
|
|
|
/ {
|
|
model = "Marvell Armada XP MV78260 SoC";
|
|
compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
gpio2 = &gpio2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "marvell,armada-xp-smp";
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "marvell,sheeva-v7";
|
|
reg = <0>;
|
|
clocks = <&cpuclk 0>;
|
|
clock-latency = <1000000>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "marvell,sheeva-v7";
|
|
reg = <1>;
|
|
clocks = <&cpuclk 1>;
|
|
clock-latency = <1000000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
/*
|
|
* MV78260 has 3 PCIe units Gen2.0: Two units can be
|
|
* configured as x4 or quad x1 lanes. One unit is
|
|
* x4 only.
|
|
*/
|
|
pciec: pcie@82000000 {
|
|
compatible = "marvell,armada-xp-pcie";
|
|
status = "disabled";
|
|
device_type = "pci";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
msi-parent = <&mpic>;
|
|
bus-range = <0x00 0xff>;
|
|
|
|
ranges =
|
|
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
|
|
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
|
|
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
|
|
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
|
|
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
|
|
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
|
|
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
|
|
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
|
|
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
|
|
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
|
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
|
|
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
|
|
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
|
|
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
|
|
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
|
|
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
|
|
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
|
|
|
|
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
|
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
|
|
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
|
|
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
|
|
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
|
|
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
|
|
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
|
|
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
|
|
|
|
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
|
|
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
|
|
|
|
pcie1: pcie@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
|
|
reg = <0x0800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
|
|
0x81000000 0 0 0x81000000 0x1 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 58>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 5>;
|
|
resets = <&systemc 0 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie2: pcie@2,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
|
|
reg = <0x1000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
|
|
0x81000000 0 0 0x81000000 0x2 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 59>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <1>;
|
|
clocks = <&gateclk 6>;
|
|
resets = <&systemc 0 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie3: pcie@3,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
|
|
reg = <0x1800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
|
|
0x81000000 0 0 0x81000000 0x3 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 60>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <2>;
|
|
clocks = <&gateclk 7>;
|
|
resets = <&systemc 0 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie4: pcie@4,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
|
|
reg = <0x2000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
|
|
0x81000000 0 0 0x81000000 0x4 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 61>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <3>;
|
|
clocks = <&gateclk 8>;
|
|
resets = <&systemc 0 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie5: pcie@5,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
|
|
reg = <0x2800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
|
|
0x81000000 0 0 0x81000000 0x5 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 62>;
|
|
marvell,pcie-port = <1>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 9>;
|
|
resets = <&systemc 0 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie6: pcie@6,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
|
|
reg = <0x3000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
|
|
0x81000000 0 0 0x81000000 0x6 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 63>;
|
|
marvell,pcie-port = <1>;
|
|
marvell,pcie-lane = <1>;
|
|
clocks = <&gateclk 10>;
|
|
resets = <&systemc 0 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie7: pcie@7,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
|
|
reg = <0x3800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
|
|
0x81000000 0 0 0x81000000 0x7 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 64>;
|
|
marvell,pcie-port = <1>;
|
|
marvell,pcie-lane = <2>;
|
|
clocks = <&gateclk 11>;
|
|
resets = <&systemc 0 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie8: pcie@8,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
|
|
reg = <0x4000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
|
|
0x81000000 0 0 0x81000000 0x8 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 65>;
|
|
marvell,pcie-port = <1>;
|
|
marvell,pcie-lane = <3>;
|
|
clocks = <&gateclk 12>;
|
|
resets = <&systemc 0 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie9: pcie@9,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
|
|
reg = <0x4800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
|
|
0x81000000 0 0 0x81000000 0x9 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 99>;
|
|
marvell,pcie-port = <2>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 26>;
|
|
resets = <&systemc 0 2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
internal-regs {
|
|
gpio0: gpio@18100 {
|
|
compatible = "marvell,armada-370-gpio",
|
|
"marvell,orion-gpio";
|
|
reg = <0x18100 0x40>, <0x181c0 0x08>;
|
|
reg-names = "gpio", "pwm";
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
#pwm-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <82>, <83>, <84>, <85>;
|
|
clocks = <&coreclk 0>;
|
|
};
|
|
|
|
gpio1: gpio@18140 {
|
|
compatible = "marvell,armada-370-gpio",
|
|
"marvell,orion-gpio";
|
|
reg = <0x18140 0x40>, <0x181c8 0x08>;
|
|
reg-names = "gpio", "pwm";
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
#pwm-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <87>, <88>, <89>, <90>;
|
|
clocks = <&coreclk 0>;
|
|
};
|
|
|
|
gpio2: gpio@18180 {
|
|
compatible = "marvell,armada-370-gpio",
|
|
"marvell,orion-gpio";
|
|
reg = <0x18180 0x40>;
|
|
ngpios = <3>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <91>;
|
|
};
|
|
|
|
eth3: ethernet@34000 {
|
|
compatible = "marvell,armada-xp-neta";
|
|
reg = <0x34000 0x4000>;
|
|
interrupts = <14>;
|
|
clocks = <&gateclk 1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
compatible = "marvell,mv78260-pinctrl";
|
|
};
|