u-boot/arch/mips/dts/mscc,jr2.dtsi
Sean Anderson 237e5880f8 spi: dw: Add SoC-specific compatible strings
This adds SoC-specific compatible strings to all users of the designware
spi device. This will allow for the correct driver to be selected for each
device. Where it is publicly documented, a compatible string for the
specific device version has also been added. Devices without
publicly-documented device versions include MSCC SoCs, and Arc Socs. All
compatible strings except those for SoCFPGAs and some of the versioned
strings have been taken from Linux.

Since SSI_MAX_XFER_SIZE is determined at runtime, this is not strictly
necessary. However, it is a good cleanup and brings things closer to Linux.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30

303 lines
8 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mscc,jr2";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "mips,mips24KEc";
device_type = "cpu";
clocks = <&cpu_clk>;
reg = <0>;
};
};
aliases {
serial0 = &uart0;
};
cpuintc: interrupt-controller@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
cpu_clk: cpu-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <500000000>;
};
ahb_clk: ahb-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x70000000 0x2000000>;
interrupt-parent = <&intc>;
cpu_ctrl: syscon@0 {
compatible = "mscc,jr2-cpu-syscon", "syscon";
reg = <0x0 0x2c>;
};
intc: interrupt-controller@70 {
compatible = "mscc,jr2-icpu-intr";
reg = <0x70 0x94>;
#interrupt-cells = <1>;
interrupt-controller;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
uart0: serial@100000 {
pinctrl-0 = <&uart_pins>;
pinctrl-names = "default";
compatible = "ns16550a";
reg = <0x100000 0x20>;
interrupts = <6>;
clocks = <&ahb_clk>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart2: serial@100800 {
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
compatible = "ns16550a";
reg = <0x100800 0x20>;
interrupts = <7>;
clocks = <&ahb_clk>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
spi0: spi-master@101000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mscc,jaguar2-spi", "snps,dw-apb-ssi";
reg = <0x101000 0x40>;
num-chipselect = <4>;
bus-num = <0>;
reg-io-width = <4>;
reg-shift = <2>;
spi-max-frequency = <18000000>; /* input clock */
clocks = <&ahb_clk>;
status = "disabled";
};
reset@1010008 {
compatible = "mscc,jr2-chip-reset";
reg = <0x1010008 0x4>;
};
gpio: pinctrl@1070034 {
compatible = "mscc,jaguar2-pinctrl";
reg = <0x1010038 0x90>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&gpio 0 0 64>;
sgpio_pins: sgpio-pins {
pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
function = "sg0";
};
sgpio1_pins: sgpio1-pins {
pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13";
function = "sg1";
};
sgpio2_pins: sgpio2-pins {
pins = "GPIO_30", "GPIO_31",
"GPIO_32", "GPIO_33";
function = "sg2";
};
uart_pins: uart-pins {
pins = "GPIO_10", "GPIO_11";
function = "uart";
};
uart2_pins: uart2-pins {
pins = "GPIO_24", "GPIO_25";
function = "uart2";
};
};
sgpio: gpio@1010150 {
compatible = "mscc,ocelot-sgpio";
status = "disabled";
pinctrl-0 = <&sgpio_pins>;
pinctrl-names = "default";
reg = <0x1010150 0x100>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&sgpio 0 0 64>;
gpio-bank-name = "sgpio0_";
sgpio-clock = <0x14>;
};
sgpio1: gpio@101025c {
compatible = "mscc,ocelot-sgpio";
status = "disabled";
pinctrl-0 = <&sgpio1_pins>;
pinctrl-names = "default";
reg = <0x101025c 0x100>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&sgpio1 0 0 64>;
gpio-bank-name = "sgpio1_";
sgpio-clock = <0x14>;
};
sgpio2: gpio@1010368 {
compatible = "mscc,ocelot-sgpio";
status = "disabled";
pinctrl-0 = <&sgpio2_pins>;
pinctrl-names = "default";
reg = <0x1010368 0x100>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&sgpio2 0 0 64>;
gpio-bank-name = "sgpio2_";
sgpio-clock = <0x14>;
};
switch: switch@1010000 {
compatible = "mscc,vsc7454-switch";
reg = <0x01040000 0x0100>, // VTSS_TO_DEV_0
<0x01050000 0x0100>, // VTSS_TO_DEV_1
<0x01060000 0x0100>, // VTSS_TO_DEV_2
<0x01070000 0x0100>, // VTSS_TO_DEV_3
<0x01080000 0x0100>, // VTSS_TO_DEV_4
<0x01090000 0x0100>, // VTSS_TO_DEV_5
<0x010a0000 0x0100>, // VTSS_TO_DEV_6
<0x010b0000 0x0100>, // VTSS_TO_DEV_7
<0x010c0000 0x0100>, // VTSS_TO_DEV_8
<0x010d0000 0x0100>, // VTSS_TO_DEV_9
<0x010e0000 0x0100>, // VTSS_TO_DEV_10
<0x010f0000 0x0100>, // VTSS_TO_DEV_11
<0x01100000 0x0100>, // VTSS_TO_DEV_12
<0x01110000 0x0100>, // VTSS_TO_DEV_13
<0x01120000 0x0100>, // VTSS_TO_DEV_14
<0x01130000 0x0100>, // VTSS_TO_DEV_15
<0x01140000 0x0100>, // VTSS_TO_DEV_16
<0x01150000 0x0100>, // VTSS_TO_DEV_17
<0x01160000 0x0100>, // VTSS_TO_DEV_18
<0x01170000 0x0100>, // VTSS_TO_DEV_19
<0x01180000 0x0100>, // VTSS_TO_DEV_20
<0x01190000 0x0100>, // VTSS_TO_DEV_21
<0x011a0000 0x0100>, // VTSS_TO_DEV_22
<0x011b0000 0x0100>, // VTSS_TO_DEV_23
<0x011c0000 0x0100>, // VTSS_TO_DEV_24
<0x011d0000 0x0100>, // VTSS_TO_DEV_25
<0x011e0000 0x0100>, // VTSS_TO_DEV_26
<0x011f0000 0x0100>, // VTSS_TO_DEV_27
<0x01200000 0x0100>, // VTSS_TO_DEV_28
<0x01210000 0x0100>, // VTSS_TO_DEV_29
<0x01220000 0x0100>, // VTSS_TO_DEV_30
<0x01230000 0x0100>, // VTSS_TO_DEV_31
<0x01240000 0x0100>, // VTSS_TO_DEV_32
<0x01250000 0x0100>, // VTSS_TO_DEV_33
<0x01260000 0x0100>, // VTSS_TO_DEV_34
<0x01270000 0x0100>, // VTSS_TO_DEV_35
<0x01280000 0x0100>, // VTSS_TO_DEV_36
<0x01290000 0x0100>, // VTSS_TO_DEV_37
<0x012a0000 0x0100>, // VTSS_TO_DEV_38
<0x012b0000 0x0100>, // VTSS_TO_DEV_39
<0x012c0000 0x0100>, // VTSS_TO_DEV_40
<0x012d0000 0x0100>, // VTSS_TO_DEV_41
<0x012e0000 0x0100>, // VTSS_TO_DEV_42
<0x012f0000 0x0100>, // VTSS_TO_DEV_43
<0x01300000 0x0100>, // VTSS_TO_DEV_44
<0x01310000 0x0100>, // VTSS_TO_DEV_45
<0x01320000 0x0100>, // VTSS_TO_DEV_46
<0x01330000 0x0100>, // VTSS_TO_DEV_47
<0x01f00000 0x100000>, // ANA_AC
<0x01d00000 0x100000>, // ANA_CL
<0x01e00000 0x100000>, // ANA_L2
<0x01410000 0x10000>, // ASM
<0x01460000 0x10000>, // HSIO
<0x01420000 0x00000>, // LRN
<0x017d0000 0x10000>, // QFWD
<0x01020000 0x20000>, // QS
<0x017e0000 0x10000>, // QSYS
<0x01b00000 0x80000>; // REW
reg-names = "port0", "port1", "port2", "port3", "port4",
"port5", "port6", "port7", "port8", "port9",
"port10", "port11", "port12", "port13",
"port14", "port15", "port16", "port17",
"port18", "port19", "port20", "port21",
"port22", "port23", "port24", "port25",
"port26", "port27", "port28", "port29",
"port30", "port31", "port32", "port33",
"port34", "port35", "port36", "port37",
"port38", "port39", "port40", "port41",
"port42", "port43", "port44", "port45",
"port46", "port47", "ana_ac", "ana_cl",
"ana_l2", "asm", "hsio", "lrn", "qfwd",
"qs", "qsys", "rew";
status = "okay";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
};
};
mdio0: mdio@010100c8 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mscc,jr2-miim";
reg = <0x010100c8 0x24>;
status = "disabled";
};
mdio1: mdio@010100ec {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mscc,jr2-miim";
reg = <0x010100ec 0x24>;
status = "disabled";
};
mdio2: mdio@01010110 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mscc,jr2-miim";
reg = <0x01010110 0x24>;
status = "disabled";
};
hsio: syscon@10d0000 {
compatible = "mscc,jr2-hsio", "syscon", "simple-mfd";
reg = <0x10d0000 0x10000>;
serdes_hsio: serdes_hsio {
compatible = "mscc,vsc7454-serdes";
#phy-cells = <3>;
};
};
};
};