u-boot/include/configs/thunderx_88xx.h
Tom Rini eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00

52 lines
1.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/**
* (C) Copyright 2014, Cavium Inc.
**/
#ifndef __THUNDERX_88XX_H__
#define __THUNDERX_88XX_H__
#define CONFIG_THUNDERX
#define CONFIG_SYS_64BIT
#define MEM_BASE 0x00500000
#define CONFIG_SYS_LOWMEM_BASE MEM_BASE
/* Link Definitions */
/* SMP Spin Table Definitions */
#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
/* PL011 Serial Configuration */
#define CONFIG_PL011_CLOCK 24000000
/* Generic Interrupt Controller Definitions */
#define GICD_BASE (0x801000000000)
#define GICR_BASE (0x801000002000)
#define CONFIG_SYS_SERIAL0 0x87e024000000
#define CONFIG_SYS_SERIAL1 0x87e025000000
/* Miscellaneous configurable options */
/* Physical Memory Map */
#define PHYS_SDRAM_1 (MEM_BASE) /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE (0x80000000-MEM_BASE) /* 2048 MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Initial environment variables */
#define UBOOT_IMG_HEAD_SIZE 0x40
/* C80000 - 0x40 */
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr=08007ffc0\0" \
"fdt_addr=0x94C00000\0" \
"fdt_high=0x9fffffff\0"
/* Do not preserve environment */
#define PLL_REF_CLK 50000000 /* 50 MHz */
#define NS_PER_REF_CLK_TICK (1000000000/PLL_REF_CLK)
#endif /* __THUNDERX_88XX_H__ */