Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-16 17:58:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/cpu/mpc83xx/cpu_init.c
Andre Schwarz 846f1574dd fix system config overwrite @ MPC834x and MPC8313 
During 83xx setup the "System I/O configuration register high" gets
overwritten with user defined value if CFG_SICRH is defined.

Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
must keep their reset value regardless of configuration.

On my board (using RGMII) those bits are set after reset - yet it's
unclear where they come from.

The patch keeps both bits on MPC834x and MPC8313.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-25 17:04:28 -05:00

339 lines
9.2 KiB
C
Raw Blame History

/*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc83xx.h>
#include <ioports.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
int open_drain, int assign);
extern void qe_init(uint qe_base);
extern void qe_reset(void);
static void config_qe_ioports(void)
{
u8 port, pin;
int dir, open_drain, assign;
int i;
for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
port = qe_iop_conf_tab[i].port;
pin = qe_iop_conf_tab[i].pin;
dir = qe_iop_conf_tab[i].dir;
open_drain = qe_iop_conf_tab[i].open_drain;
assign = qe_iop_conf_tab[i].assign;
qe_config_iopin(port, pin, dir, open_drain, assign);
}
}
#endif
/*
* Breathe some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f (volatile immap_t * im)
{
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
/* system performance tweaking */
#ifdef CFG_ACR_PIPE_DEP
/* Arbiter pipeline depth */
im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
(CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
#endif
#ifdef CFG_ACR_RPTCNT
/* Arbiter repeat count */
im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
(CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
#endif
#ifdef CFG_SPCR_OPT
/* Optimize transactions between CSB and other devices */
im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
(CFG_SPCR_OPT << SPCR_OPT_SHIFT);
#endif
#ifdef CFG_SPCR_TSECEP
/* all eTSEC's Emergency priority */
im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) |
(CFG_SPCR_TSECEP << SPCR_TSECEP_SHIFT);
#endif
#ifdef CFG_SPCR_TSEC1EP
/* TSEC1 Emergency priority */
im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) |
(CFG_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT);
#endif
#ifdef CFG_SPCR_TSEC2EP
/* TSEC2 Emergency priority */
im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) |
(CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
#endif
#ifdef CFG_SCCR_ENCCM
/* Encryption clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_ENCCM) |
(CFG_SCCR_ENCCM << SCCR_PCICM_SHIFT);
#endif
#ifdef CFG_SCCR_PCICM
/* PCI & DMA clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_PCICM) |
(CFG_SCCR_PCICM << SCCR_PCICM_SHIFT);
#endif
#ifdef CFG_SCCR_TSECCM
/* all TSEC's clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSECCM) |
(CFG_SCCR_TSECCM << SCCR_TSECCM_SHIFT);
#endif
#ifdef CFG_SCCR_TSEC1CM
/* TSEC1 clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) |
(CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
#endif
#ifdef CFG_SCCR_TSEC2CM
/* TSEC2 clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) |
(CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
#endif
#ifdef CFG_SCCR_TSEC1ON
/* TSEC1 clock switch */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) |
(CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
#endif
#ifdef CFG_SCCR_TSEC2ON
/* TSEC2 clock switch */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) |
(CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
#endif
#ifdef CFG_SCCR_USBMPHCM
/* USB MPH clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) |
(CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
#endif
#ifdef CFG_SCCR_USBDRCM
/* USB DR clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_USBDRCM) |
(CFG_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT);
#endif
#ifdef CFG_SCCR_SATACM
/* SATA controller clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_SATACM) |
(CFG_SCCR_SATACM << SCCR_SATACM_SHIFT);
#endif
/* RSR - Reset Status Register - clear all status (4.6.1.3) */
gd->reset_status = im->reset.rsr;
im->reset.rsr = ~(RSR_RES);
/*
* RMR - Reset Mode Register
* contains checkstop reset enable (4.6.1.4)
*/
im->reset.rmr = (RMR_CSRE & (1<<RMR_CSRE_SHIFT));
/* LCRR - Clock Ratio Register (10.3.1.16) */
im->lbus.lcrr = CFG_LCRR;
/* Enable Time Base & Decrimenter ( so we will have udelay() )*/
im->sysconf.spcr |= SPCR_TBEN;
/* System General Purpose Register */
#ifdef CFG_SICRH
#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC8313)
/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
im->sysconf.sicrh = (im->sysconf.sicrh & 0x0000000C) | CFG_SICRH;
#else
im->sysconf.sicrh = CFG_SICRH;
#endif
#endif
#ifdef CFG_SICRL
im->sysconf.sicrl = CFG_SICRL;
#endif
/* DDR control driver register */
#ifdef CFG_DDRCDR
im->sysconf.ddrcdr = CFG_DDRCDR;
#endif
/* Output buffer impedance register */
#ifdef CFG_OBIR
im->sysconf.obir = CFG_OBIR;
#endif
#ifdef CONFIG_QE
/* Config QE ioports */
config_qe_ioports();
#endif
/*
* Memory Controller:
*/
/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
* addresses - these have to be modified later when FLASH size
* has been determined
*/
#if defined(CFG_BR0_PRELIM) \
&& defined(CFG_OR0_PRELIM) \
&& defined(CFG_LBLAWBAR0_PRELIM) \
&& defined(CFG_LBLAWAR0_PRELIM)
im->lbus.bank[0].br = CFG_BR0_PRELIM;
im->lbus.bank[0].or = CFG_OR0_PRELIM;
im->sysconf.lblaw[0].bar = CFG_LBLAWBAR0_PRELIM;
im->sysconf.lblaw[0].ar = CFG_LBLAWAR0_PRELIM;
#else
#error CFG_BR0_PRELIM, CFG_OR0_PRELIM, CFG_LBLAWBAR0_PRELIM & CFG_LBLAWAR0_PRELIM must be defined
#endif
#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
im->lbus.bank[1].br = CFG_BR1_PRELIM;
im->lbus.bank[1].or = CFG_OR1_PRELIM;
#endif
#if defined(CFG_LBLAWBAR1_PRELIM) && defined(CFG_LBLAWAR1_PRELIM)
im->sysconf.lblaw[1].bar = CFG_LBLAWBAR1_PRELIM;
im->sysconf.lblaw[1].ar = CFG_LBLAWAR1_PRELIM;
#endif
#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
im->lbus.bank[2].br = CFG_BR2_PRELIM;
im->lbus.bank[2].or = CFG_OR2_PRELIM;
#endif
#if defined(CFG_LBLAWBAR2_PRELIM) && defined(CFG_LBLAWAR2_PRELIM)
im->sysconf.lblaw[2].bar = CFG_LBLAWBAR2_PRELIM;
im->sysconf.lblaw[2].ar = CFG_LBLAWAR2_PRELIM;
#endif
#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
im->lbus.bank[3].br = CFG_BR3_PRELIM;
im->lbus.bank[3].or = CFG_OR3_PRELIM;
#endif
#if defined(CFG_LBLAWBAR3_PRELIM) && defined(CFG_LBLAWAR3_PRELIM)
im->sysconf.lblaw[3].bar = CFG_LBLAWBAR3_PRELIM;
im->sysconf.lblaw[3].ar = CFG_LBLAWAR3_PRELIM;
#endif
#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
im->lbus.bank[4].br = CFG_BR4_PRELIM;
im->lbus.bank[4].or = CFG_OR4_PRELIM;
#endif
#if defined(CFG_LBLAWBAR4_PRELIM) && defined(CFG_LBLAWAR4_PRELIM)
im->sysconf.lblaw[4].bar = CFG_LBLAWBAR4_PRELIM;
im->sysconf.lblaw[4].ar = CFG_LBLAWAR4_PRELIM;
#endif
#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
im->lbus.bank[5].br = CFG_BR5_PRELIM;
im->lbus.bank[5].or = CFG_OR5_PRELIM;
#endif
#if defined(CFG_LBLAWBAR5_PRELIM) && defined(CFG_LBLAWAR5_PRELIM)
im->sysconf.lblaw[5].bar = CFG_LBLAWBAR5_PRELIM;
im->sysconf.lblaw[5].ar = CFG_LBLAWAR5_PRELIM;
#endif
#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
im->lbus.bank[6].br = CFG_BR6_PRELIM;
im->lbus.bank[6].or = CFG_OR6_PRELIM;
#endif
#if defined(CFG_LBLAWBAR6_PRELIM) && defined(CFG_LBLAWAR6_PRELIM)
im->sysconf.lblaw[6].bar = CFG_LBLAWBAR6_PRELIM;
im->sysconf.lblaw[6].ar = CFG_LBLAWAR6_PRELIM;
#endif
#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
im->lbus.bank[7].br = CFG_BR7_PRELIM;
im->lbus.bank[7].or = CFG_OR7_PRELIM;
#endif
#if defined(CFG_LBLAWBAR7_PRELIM) && defined(CFG_LBLAWAR7_PRELIM)
im->sysconf.lblaw[7].bar = CFG_LBLAWBAR7_PRELIM;
im->sysconf.lblaw[7].ar = CFG_LBLAWAR7_PRELIM;
#endif
#ifdef CFG_GPIO1_PRELIM
im->gpio[0].dir = CFG_GPIO1_DIR;
im->gpio[0].dat = CFG_GPIO1_DAT;
#endif
#ifdef CFG_GPIO2_PRELIM
im->gpio[1].dir = CFG_GPIO2_DIR;
im->gpio[1].dat = CFG_GPIO2_DAT;
#endif
}
int cpu_init_r (void)
{
#ifdef CONFIG_QE
uint qe_base = CFG_IMMR + 0x00100000; /* QE immr base */
qe_init(qe_base);
qe_reset();
#endif
return 0;
}
/*
* Figure out the cause of the reset
*/
int prt_83xx_rsr(void)
{
static struct {
ulong mask;
char *desc;
} bits[] = {
{
RSR_SWSR, "Software Soft"}, {
RSR_SWHR, "Software Hard"}, {
RSR_JSRS, "JTAG Soft"}, {
RSR_CSHR, "Check Stop"}, {
RSR_SWRS, "Software Watchdog"}, {
RSR_BMRS, "Bus Monitor"}, {
RSR_SRS, "External/Internal Soft"}, {
RSR_HRS, "External/Internal Hard"}
};
static int n = sizeof bits / sizeof bits[0];
ulong rsr = gd->reset_status;
int i;
char *sep;
puts("Reset Status:");
sep = " ";
for (i = 0; i < n; i++)
if (rsr & bits[i].mask) {
printf("%s%s", sep, bits[i].desc);
sep = ", ";
}
puts("\n\n");
return 0;
}
Reference in a new issue View git blame Copy permalink