u-boot/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
Alexander Graf 5a37a2f014 armv8: ls2080a: Declare spin tables as reserved for efi loader
The efi loader code has its own memory map, so it needs to be aware where
the spin tables are located, to ensure that no code writes into those
regions.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17 14:18:56 +01:00

179 lines
4.3 KiB
C

/*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <efi_loader.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <phy.h>
#ifdef CONFIG_FSL_LSCH3
#include <asm/arch/fdt.h>
#endif
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
#include <fsl_fman.h>
#endif
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
#include <fsl_sec.h>
#include <asm/arch-fsl-layerscape/soc.h>
#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
#include <asm/armv8/sec_firmware.h>
#endif
int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
return fdt_setprop_string(blob, offset, "phy-connection-type",
phy_string_for_interface(phyc));
}
#ifdef CONFIG_MP
void ft_fixup_cpu(void *blob)
{
int off;
__maybe_unused u64 spin_tbl_addr = (u64)get_spin_tbl_addr();
fdt32_t *reg;
int addr_cells;
u64 val, core_id;
size_t *boot_code_size = &(__secondary_boot_code_size);
#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && defined(CONFIG_ARMV8_PSCI)
int node;
u32 psci_ver;
/* Check the psci version to determine if the psci is supported */
psci_ver = sec_firmware_support_psci_version();
if (psci_ver == 0xffffffff) {
/* remove psci DT node */
node = fdt_path_offset(blob, "/psci");
if (node >= 0)
goto remove_psci_node;
node = fdt_node_offset_by_compatible(blob, -1, "arm,psci");
if (node >= 0)
goto remove_psci_node;
node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-0.2");
if (node >= 0)
goto remove_psci_node;
node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-1.0");
if (node >= 0)
goto remove_psci_node;
remove_psci_node:
if (node >= 0)
fdt_del_node(blob, node);
} else {
return;
}
#endif
off = fdt_path_offset(blob, "/cpus");
if (off < 0) {
puts("couldn't find /cpus node\n");
return;
}
of_bus_default_count_cells(blob, off, &addr_cells, NULL);
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0);
if (reg) {
core_id = of_read_number(reg, addr_cells);
if (core_id == 0 || (is_core_online(core_id))) {
val = spin_tbl_addr;
val += id_to_core(core_id) *
SPIN_TABLE_ELEM_SIZE;
val = cpu_to_fdt64(val);
fdt_setprop_string(blob, off, "enable-method",
"spin-table");
fdt_setprop(blob, off, "cpu-release-addr",
&val, sizeof(val));
} else {
debug("skipping offline core\n");
}
} else {
puts("Warning: found cpu node without reg property\n");
}
off = fdt_node_offset_by_prop_value(blob, off, "device_type",
"cpu", 4);
}
fdt_add_mem_rsv(blob, (uintptr_t)&secondary_boot_code,
*boot_code_size);
#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
efi_add_memory_map((uintptr_t)&secondary_boot_code,
ALIGN(*boot_code_size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
EFI_RESERVED_MEMORY_TYPE, false);
#endif
}
#endif
void fsl_fdt_disable_usb(void *blob)
{
int off;
/*
* SYSCLK is used as a reference clock for USB. When the USB
* controller is used, SYSCLK must meet the additional requirement
* of 100 MHz.
*/
if (CONFIG_SYS_CLK_FREQ != 100000000) {
off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
while (off != -FDT_ERR_NOTFOUND) {
fdt_status_disabled(blob, off);
off = fdt_node_offset_by_compatible(blob, off,
"snps,dwc3");
}
}
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_FSL_LSCH2
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int svr = in_be32(&gur->svr);
/* delete crypto node if not on an E-processor */
if (!IS_E_PROCESSOR(svr))
fdt_fixup_crypto_node(blob, 0);
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
else {
ccsr_sec_t __iomem *sec;
sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
}
#endif
#endif
#ifdef CONFIG_MP
ft_fixup_cpu(blob);
#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "fsl,ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
do_fixup_by_compat_u32(blob, "fixed-clock",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
#ifdef CONFIG_FSL_ESDHC
fdt_fixup_esdhc(blob, bd);
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_firmware(blob);
#endif
fsl_fdt_disable_usb(blob);
}