u-boot/board/samsung/smdkc100/onenand.c
Ladislav Michl 77b93e5e9b mtd: OneNAND: allow board init function fail
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22 14:46:12 -04:00

70 lines
1.6 KiB
C

/*
* Copyright (C) 2008-2009 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/compat.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/samsung_onenand.h>
#include <onenand_uboot.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
int onenand_board_init(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
struct s5pc100_clock *clk =
(struct s5pc100_clock *)samsung_get_base_clock();
struct samsung_onenand *onenand;
int value;
this->base = (void *)S5PC100_ONENAND_BASE;
onenand = (struct samsung_onenand *)this->base;
/* D0 Domain memory clock gating */
value = readl(&clk->gate_d01);
value &= ~(1 << 2); /* CLK_ONENANDC */
value |= (1 << 2);
writel(value, &clk->gate_d01);
value = readl(&clk->src0);
value &= ~(1 << 24); /* MUX_1nand: 0 from HCLKD0 */
value &= ~(1 << 20); /* MUX_HREF: 0 from FIN_27M */
writel(value, &clk->src0);
value = readl(&clk->div1);
value &= ~(3 << 16); /* PCLKD1_RATIO */
value |= (1 << 16);
writel(value, &clk->div1);
writel(ONENAND_MEM_RESET_COLD, &onenand->mem_reset);
while (!(readl(&onenand->int_err_stat) & RST_CMP))
continue;
writel(RST_CMP, &onenand->int_err_ack);
/*
* Access_Clock [2:0]
* 166 MHz, 134 Mhz : 3
* 100 Mhz, 60 Mhz : 2
*/
writel(0x3, &onenand->acc_clock);
writel(INT_ERR_ALL, &onenand->int_err_mask);
writel(1 << 0, &onenand->int_pin_en); /* Enable */
value = readl(&onenand->int_err_mask);
value &= ~RDY_ACT;
writel(value, &onenand->int_err_mask);
s3c_onenand_init(mtd);
return 0;
}