mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 20:43:32 +00:00
a2e99a71b2
Two variants of controllers are supported: V1 (bitwise only) found in i.MX21, i.MX27, i.MX31, i.MX51 V2 (byte operations) found in i.MX25, i.MX35, i.MX50, i.MX53 Only tested on i.MX53 hardware but in both modes (by modifying the device tree). Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
37 lines
918 B
Text
37 lines
918 B
Text
NXP i.MX (MXC) One wire bus master controller
|
|
=======================
|
|
|
|
Child nodes are required in device tree. The driver will detect
|
|
the devices serial number and then search in the child nodes in the device tree
|
|
for the proper node and try to match it with the device.
|
|
|
|
Also check doc/device-tree-bindings/w1-eeprom for possible child nodes drivers
|
|
|
|
Driver:
|
|
- drivers/w1/mxc_w1.c
|
|
|
|
Required properties:
|
|
- compatible : should be one of
|
|
"fsl,imx21-owire", "fsl,imx27-owire", "fsl,imx31-owire", "fsl,imx25-owire"
|
|
"fsl,imx25-owire", "fsl,imx35-owire", "fsl,imx50-owire", "fsl,imx53-owire"
|
|
|
|
- reg : Address and length of the register set for the device
|
|
|
|
Optional:
|
|
* none
|
|
|
|
Example:
|
|
onewire {
|
|
compatible = "fsl,imx53-owire";
|
|
reg = <0x63fa4000 0x4000>;
|
|
};
|
|
|
|
Example with child:
|
|
onewire {
|
|
compatible = "fsl,imx53-owire";
|
|
reg = <0x63fa4000 0x4000>;
|
|
|
|
eeprom1: eeprom@0 {
|
|
compatible = "maxim,ds24xxx";
|
|
};
|
|
};
|