u-boot/arch/arm/cpu/arm926ejs/mx27/generic.c
Helmut Raiger fa47a28661 mmc: access mxcmmc from mx31 boards
This patch modifies mxcmmc.c to be used
not only by i.MX27 but also by i.MX31 boards.
Both use the same SD controller, but have different
clock set-ups.
The i.MX27 imx_get_XXXclock functions are made static to
generic.c and a public mxc_get_clock() function
is provided.  Pins, base address and prototypes for
an i.MX31 specific board_init_mmc() are provided.
Some of the i.MX27 clock getters are unused and marked
as such to avoid warnings (./MAKEALL -s mx27), but
the code was left in for future use.

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-02-12 10:11:26 +01:00

381 lines
8.7 KiB
C

/*
* Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
* Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <div64.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#ifdef CONFIG_MXC_MMC
#include <asm/arch/mxcmmc.h>
#endif
/*
* get the system pll clock in Hz
*
* mfi + mfn / (mfd +1)
* f = 2 * f_ref * --------------------
* pd + 1
*/
static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
{
unsigned int mfi = (pll >> 10) & 0xf;
unsigned int mfn = pll & 0x3ff;
unsigned int mfd = (pll >> 16) & 0x3ff;
unsigned int pd = (pll >> 26) & 0xf;
mfi = mfi <= 5 ? 5 : mfi;
return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn),
(mfd + 1) * (pd + 1));
}
static ulong clk_in_32k(void)
{
return 1024 * CONFIG_MX27_CLK32;
}
static ulong clk_in_26m(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
if (readl(&pll->cscr) & CSCR_OSC26M_DIV1P5) {
/* divide by 1.5 */
return 26000000 * 2 / 3;
} else {
return 26000000;
}
}
static ulong imx_get_mpllclk(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
ulong cscr = readl(&pll->cscr);
ulong fref;
if (cscr & CSCR_MCU_SEL)
fref = clk_in_26m();
else
fref = clk_in_32k();
return imx_decode_pll(readl(&pll->mpctl0), fref);
}
static ulong imx_get_armclk(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
ulong cscr = readl(&pll->cscr);
ulong fref = imx_get_mpllclk();
ulong div;
if (!(cscr & CSCR_ARM_SRC_MPLL))
fref = lldiv((fref * 2), 3);
div = ((cscr >> 12) & 0x3) + 1;
return lldiv(fref, div);
}
static ulong imx_get_ahbclk(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
ulong cscr = readl(&pll->cscr);
ulong fref = imx_get_mpllclk();
ulong div;
div = ((cscr >> 8) & 0x3) + 1;
return lldiv(fref * 2, 3 * div);
}
static __attribute__((unused)) ulong imx_get_spllclk(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
ulong cscr = readl(&pll->cscr);
ulong fref;
if (cscr & CSCR_SP_SEL)
fref = clk_in_26m();
else
fref = clk_in_32k();
return imx_decode_pll(readl(&pll->spctl0), fref);
}
static ulong imx_decode_perclk(ulong div)
{
return lldiv((imx_get_mpllclk() * 2), (div * 3));
}
static ulong imx_get_perclk1(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
return imx_decode_perclk((readl(&pll->pcdr1) & 0x3f) + 1);
}
static ulong imx_get_perclk2(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
return imx_decode_perclk(((readl(&pll->pcdr1) >> 8) & 0x3f) + 1);
}
static __attribute__((unused)) ulong imx_get_perclk3(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
return imx_decode_perclk(((readl(&pll->pcdr1) >> 16) & 0x3f) + 1);
}
static __attribute__((unused)) ulong imx_get_perclk4(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1);
}
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
case MXC_ARM_CLK:
return imx_get_armclk();
case MXC_UART_CLK:
return imx_get_perclk1();
case MXC_FEC_CLK:
return imx_get_ahbclk();
case MXC_ESDHC_CLK:
return imx_get_perclk2();
}
return -1;
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo (void)
{
char buf[32];
printf("CPU: Freescale i.MX27 at %s MHz\n\n",
strmhz(buf, imx_get_mpllclk()));
return 0;
}
#endif
int cpu_eth_init(bd_t *bis)
{
#if defined(CONFIG_FEC_MXC)
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
/* enable FEC clock */
writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
return fecmxc_initialize(bis);
#else
return 0;
#endif
}
/*
* Initializes on-chip MMC controllers.
* to override, implement board_mmc_init()
*/
int cpu_mmc_init(bd_t *bis)
{
#ifdef CONFIG_MXC_MMC
return mxc_mmc_init(bis);
#else
return 0;
#endif
}
void imx_gpio_mode(int gpio_mode)
{
struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
unsigned int pin = gpio_mode & GPIO_PIN_MASK;
unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT;
unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT;
unsigned int tmp;
/* Pullup enable */
if (gpio_mode & GPIO_PUEN) {
writel(readl(&regs->port[port].puen) | (1 << pin),
&regs->port[port].puen);
} else {
writel(readl(&regs->port[port].puen) & ~(1 << pin),
&regs->port[port].puen);
}
/* Data direction */
if (gpio_mode & GPIO_OUT) {
writel(readl(&regs->port[port].ddir) | 1 << pin,
&regs->port[port].ddir);
} else {
writel(readl(&regs->port[port].ddir) & ~(1 << pin),
&regs->port[port].ddir);
}
/* Primary / alternate function */
if (gpio_mode & GPIO_AF) {
writel(readl(&regs->port[port].gpr) | (1 << pin),
&regs->port[port].gpr);
} else {
writel(readl(&regs->port[port].gpr) & ~(1 << pin),
&regs->port[port].gpr);
}
/* use as gpio? */
if (!(gpio_mode & (GPIO_PF | GPIO_AF))) {
writel(readl(&regs->port[port].gius) | (1 << pin),
&regs->port[port].gius);
} else {
writel(readl(&regs->port[port].gius) & ~(1 << pin),
&regs->port[port].gius);
}
/* Output / input configuration */
if (pin < 16) {
tmp = readl(&regs->port[port].ocr1);
tmp &= ~(3 << (pin * 2));
tmp |= (ocr << (pin * 2));
writel(tmp, &regs->port[port].ocr1);
writel(readl(&regs->port[port].iconfa1) & ~(3 << (pin * 2)),
&regs->port[port].iconfa1);
writel(readl(&regs->port[port].iconfa1) | aout << (pin * 2),
&regs->port[port].iconfa1);
writel(readl(&regs->port[port].iconfb1) & ~(3 << (pin * 2)),
&regs->port[port].iconfb1);
writel(readl(&regs->port[port].iconfb1) | bout << (pin * 2),
&regs->port[port].iconfb1);
} else {
pin -= 16;
tmp = readl(&regs->port[port].ocr2);
tmp &= ~(3 << (pin * 2));
tmp |= (ocr << (pin * 2));
writel(tmp, &regs->port[port].ocr2);
writel(readl(&regs->port[port].iconfa2) & ~(3 << (pin * 2)),
&regs->port[port].iconfa2);
writel(readl(&regs->port[port].iconfa2) | aout << (pin * 2),
&regs->port[port].iconfa2);
writel(readl(&regs->port[port].iconfb2) & ~(3 << (pin * 2)),
&regs->port[port].iconfb2);
writel(readl(&regs->port[port].iconfb2) | bout << (pin * 2),
&regs->port[port].iconfb2);
}
}
#ifdef CONFIG_MXC_UART
void mx27_uart1_init_pins(void)
{
int i;
unsigned int mode[] = {
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
};
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
}
#endif /* CONFIG_MXC_UART */
#ifdef CONFIG_FEC_MXC
void mx27_fec_init_pins(void)
{
int i;
unsigned int mode[] = {
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC | GPIO_PUEN,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_CLR,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
};
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
}
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
int i;
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
struct fuse_bank *bank = &iim->bank[0];
struct fuse_bank0_regs *fuse =
(struct fuse_bank0_regs *)bank->fuse_regs;
for (i = 0; i < 6; i++)
mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff;
}
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_MXC_MMC
void mx27_sd1_init_pins(void)
{
int i;
unsigned int mode[] = {
PE18_PF_SD1_D0,
PE19_PF_SD1_D1,
PE20_PF_SD1_D2,
PE21_PF_SD1_D3,
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
};
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
}
void mx27_sd2_init_pins(void)
{
int i;
unsigned int mode[] = {
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
};
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
}
#endif /* CONFIG_MXC_MMC */