mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 15:53:02 +00:00
9d24274509
Add support for U-BOOT SPL. NOR and RAM mode are supported. There are 3 images in NOR flash. u-boot.img, dtb and kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
510 lines
14 KiB
C
510 lines
14 KiB
C
/*
|
|
* (C) Copyright 2007-2010 Michal Simek
|
|
*
|
|
* Michal SIMEK <monstr@monstr.eu>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include "../board/xilinx/microblaze-generic/xparameters.h"
|
|
|
|
/* MicroBlaze CPU */
|
|
#define CONFIG_MICROBLAZE 1
|
|
#define MICROBLAZE_V5 1
|
|
|
|
/* Open Firmware DTS */
|
|
#define CONFIG_OF_CONTROL 1
|
|
#define CONFIG_OF_EMBED 1
|
|
#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic
|
|
|
|
/* linear and spi flash memory */
|
|
#ifdef XILINX_FLASH_START
|
|
#define FLASH
|
|
#undef SPIFLASH
|
|
#undef RAMENV /* hold environment in flash */
|
|
#else
|
|
#ifdef XILINX_SPI_FLASH_BASEADDR
|
|
#undef FLASH
|
|
#define SPIFLASH
|
|
#undef RAMENV /* hold environment in flash */
|
|
#else
|
|
#undef FLASH
|
|
#undef SPIFLASH
|
|
#define RAMENV /* hold environment in RAM */
|
|
#endif
|
|
#endif
|
|
|
|
/* uart */
|
|
#ifdef XILINX_UARTLITE_BASEADDR
|
|
# define CONFIG_XILINX_UARTLITE
|
|
# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
|
|
# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
|
|
# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
|
|
# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
|
|
#elif XILINX_UART16550_BASEADDR
|
|
# define CONFIG_SYS_NS16550 1
|
|
# define CONFIG_SYS_NS16550_SERIAL
|
|
# if defined(__MICROBLAZEEL__)
|
|
# define CONFIG_SYS_NS16550_REG_SIZE -4
|
|
# else
|
|
# define CONFIG_SYS_NS16550_REG_SIZE 4
|
|
# endif
|
|
# define CONFIG_CONS_INDEX 1
|
|
# define CONFIG_SYS_NS16550_COM1 \
|
|
((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
|
|
# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
|
|
# define CONFIG_BAUDRATE 115200
|
|
|
|
/* The following table includes the supported baudrates */
|
|
# define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
|
|
# define CONSOLE_ARG "console=console=ttyS0,115200\0"
|
|
#else
|
|
# error Undefined uart
|
|
#endif
|
|
|
|
/* setting reset address */
|
|
/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
|
|
|
|
/* ethernet */
|
|
#undef CONFIG_SYS_ENET
|
|
#if defined(XILINX_EMACLITE_BASEADDR)
|
|
# define CONFIG_XILINX_EMACLITE 1
|
|
# define CONFIG_SYS_ENET
|
|
#endif
|
|
#if defined(XILINX_LLTEMAC_BASEADDR)
|
|
# define CONFIG_XILINX_LL_TEMAC 1
|
|
# define CONFIG_SYS_ENET
|
|
#endif
|
|
#if defined(XILINX_AXIEMAC_BASEADDR)
|
|
# define CONFIG_XILINX_AXIEMAC 1
|
|
# define CONFIG_SYS_ENET
|
|
#endif
|
|
|
|
#undef ET_DEBUG
|
|
|
|
/* gpio */
|
|
#ifdef XILINX_GPIO_BASEADDR
|
|
# define CONFIG_XILINX_GPIO
|
|
# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
|
|
#endif
|
|
|
|
/* interrupt controller */
|
|
#ifdef XILINX_INTC_BASEADDR
|
|
# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
|
|
# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
|
|
#endif
|
|
|
|
/* timer */
|
|
#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ)
|
|
# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
|
|
# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
|
|
#endif
|
|
|
|
/* watchdog */
|
|
#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
|
|
# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR
|
|
# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ
|
|
# define CONFIG_HW_WATCHDOG
|
|
# define CONFIG_XILINX_TB_WATCHDOG
|
|
#endif
|
|
|
|
/*
|
|
* memory layout - Example
|
|
* CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk
|
|
* CONFIG_SYS_SRAM_BASE = 0x1000_0000;
|
|
* CONFIG_SYS_SRAM_SIZE = 0x0400_0000; 64MB
|
|
*
|
|
* CONFIG_SYS_MONITOR_LEN = 0x40000
|
|
* CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000
|
|
*
|
|
* CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
|
|
* CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000
|
|
* CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000
|
|
*
|
|
* 0x1000_0000 CONFIG_SYS_SDRAM_BASE
|
|
* MEMTEST_AREA 64kB
|
|
* FREE
|
|
* 0x1200_0000 CONFIG_SYS_TEXT_BASE
|
|
* U-BOOT code
|
|
* 0x1202_0000
|
|
* FREE
|
|
*
|
|
* STACK
|
|
* 0x13EF_F000 CONFIG_SYS_MALLOC_BASE
|
|
* MALLOC_AREA 768kB Alloc
|
|
* 0x13FB_F000 CONFIG_SYS_MONITOR_BASE
|
|
* MONITOR_CODE 256kB Env
|
|
* 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET
|
|
* GLOBAL_DATA 4kB bd, gd
|
|
* 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
|
|
*/
|
|
|
|
/* ddr sdram - main memory */
|
|
#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
|
|
#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
|
|
|
|
/* global pointer */
|
|
/* start of global data */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
|
(CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
/* monitor code */
|
|
#define SIZE 0x40000
|
|
#define CONFIG_SYS_MONITOR_LEN SIZE
|
|
#define CONFIG_SYS_MONITOR_BASE \
|
|
(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
|
|
- CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
|
|
#define CONFIG_SYS_MONITOR_END \
|
|
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_SYS_MALLOC_LEN (SIZE * 3)
|
|
#define CONFIG_SYS_MALLOC_BASE \
|
|
(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
|
|
|
|
/* stack */
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE
|
|
|
|
/*
|
|
* CFI flash memory layout - Example
|
|
* CONFIG_SYS_FLASH_BASE = 0x2200_0000;
|
|
* CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB
|
|
*
|
|
* SECT_SIZE = 0x20000; 128kB is one sector
|
|
* CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store
|
|
*
|
|
* 0x2200_0000 CONFIG_SYS_FLASH_BASE
|
|
* FREE 256kB
|
|
* 0x2204_0000 CONFIG_ENV_ADDR
|
|
* ENV_AREA 128kB
|
|
* 0x2206_0000
|
|
* FREE
|
|
* 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
|
|
*
|
|
*/
|
|
|
|
#ifdef FLASH
|
|
# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
|
|
# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
|
|
# define CONFIG_SYS_FLASH_CFI 1
|
|
# define CONFIG_FLASH_CFI_DRIVER 1
|
|
/* ?empty sector */
|
|
# define CONFIG_SYS_FLASH_EMPTY_INFO 1
|
|
/* max number of memory banks */
|
|
# define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
/* max number of sectors on one chip */
|
|
# define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
/* hardware flash protection */
|
|
# define CONFIG_SYS_FLASH_PROTECTION
|
|
/* use buffered writes (20x faster) */
|
|
# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
|
|
# ifdef RAMENV
|
|
# define CONFIG_ENV_IS_NOWHERE 1
|
|
# define CONFIG_ENV_SIZE 0x1000
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
|
|
|
|
# else /* FLASH && !RAMENV */
|
|
# define CONFIG_ENV_IS_IN_FLASH 1
|
|
/* 128K(one sector) for env */
|
|
# define CONFIG_ENV_SECT_SIZE 0x20000
|
|
# define CONFIG_ENV_ADDR \
|
|
(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
|
|
# define CONFIG_ENV_SIZE 0x20000
|
|
# endif /* FLASH && !RAMBOOT */
|
|
#else /* !FLASH */
|
|
|
|
#ifdef SPIFLASH
|
|
# define CONFIG_SYS_NO_FLASH 1
|
|
# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR
|
|
# define CONFIG_XILINX_SPI 1
|
|
# define CONFIG_SPI 1
|
|
# define CONFIG_SPI_FLASH 1
|
|
# define CONFIG_SPI_FLASH_STMICRO 1
|
|
# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
|
|
# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
|
|
# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS
|
|
|
|
# ifdef RAMENV
|
|
# define CONFIG_ENV_IS_NOWHERE 1
|
|
# define CONFIG_ENV_SIZE 0x1000
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
|
|
|
|
# else /* SPIFLASH && !RAMENV */
|
|
# define CONFIG_ENV_IS_IN_SPI_FLASH 1
|
|
# define CONFIG_ENV_SPI_MODE SPI_MODE_3
|
|
# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
|
# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
|
/* 128K(two sectors) for env */
|
|
# define CONFIG_ENV_SECT_SIZE 0x10000
|
|
# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE)
|
|
/* Warning: adjust the offset in respect of other flash content and size */
|
|
# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
|
|
# endif /* SPIFLASH && !RAMBOOT */
|
|
#else /* !SPIFLASH */
|
|
|
|
/* ENV in RAM */
|
|
# define CONFIG_SYS_NO_FLASH 1
|
|
# define CONFIG_ENV_IS_NOWHERE 1
|
|
# define CONFIG_ENV_SIZE 0x1000
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
|
|
#endif /* !SPIFLASH */
|
|
#endif /* !FLASH */
|
|
|
|
/* system ace */
|
|
#ifdef XILINX_SYSACE_BASEADDR
|
|
# define CONFIG_SYSTEMACE
|
|
/* #define DEBUG_SYSTEMACE */
|
|
# define SYSTEMACE_CONFIG_FPGA
|
|
# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
|
|
# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
|
|
# define CONFIG_DOS_PARTITION
|
|
#endif
|
|
|
|
#if defined(XILINX_USE_ICACHE)
|
|
# define CONFIG_ICACHE
|
|
#else
|
|
# undef CONFIG_ICACHE
|
|
#endif
|
|
|
|
#if defined(XILINX_USE_DCACHE)
|
|
# define CONFIG_DCACHE
|
|
#else
|
|
# undef CONFIG_DCACHE
|
|
#endif
|
|
|
|
#ifndef XILINX_DCACHE_BYTE_SIZE
|
|
#define XILINX_DCACHE_BYTE_SIZE 32768
|
|
#endif
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_MFSL
|
|
#define CONFIG_CMD_ECHO
|
|
#define CONFIG_CMD_GPIO
|
|
|
|
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
|
|
# define CONFIG_CMD_CACHE
|
|
#else
|
|
# undef CONFIG_CMD_CACHE
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_ENET
|
|
# undef CONFIG_CMD_NET
|
|
# undef CONFIG_CMD_NFS
|
|
#else
|
|
# define CONFIG_CMD_PING
|
|
# define CONFIG_CMD_DHCP
|
|
# define CONFIG_CMD_TFTPPUT
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYSTEMACE)
|
|
# define CONFIG_CMD_EXT2
|
|
# define CONFIG_CMD_FAT
|
|
#endif
|
|
|
|
#if defined(FLASH)
|
|
# define CONFIG_CMD_ECHO
|
|
# define CONFIG_CMD_FLASH
|
|
# define CONFIG_CMD_IMLS
|
|
# define CONFIG_CMD_JFFS2
|
|
# define CONFIG_CMD_UBI
|
|
# undef CONFIG_CMD_UBIFS
|
|
|
|
# if !defined(RAMENV)
|
|
# define CONFIG_CMD_SAVEENV
|
|
# define CONFIG_CMD_SAVES
|
|
# endif
|
|
|
|
#else
|
|
#if defined(SPIFLASH)
|
|
# define CONFIG_CMD_SF
|
|
|
|
# if !defined(RAMENV)
|
|
# define CONFIG_CMD_SAVEENV
|
|
# define CONFIG_CMD_SAVES
|
|
# endif
|
|
#else
|
|
# undef CONFIG_CMD_IMLS
|
|
# undef CONFIG_CMD_FLASH
|
|
# undef CONFIG_CMD_JFFS2
|
|
# undef CONFIG_CMD_UBI
|
|
# undef CONFIG_CMD_UBIFS
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_JFFS2)
|
|
# define CONFIG_MTD_PARTITIONS
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_UBIFS)
|
|
# define CONFIG_CMD_UBI
|
|
# define CONFIG_LZO
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_UBI)
|
|
# define CONFIG_MTD_PARTITIONS
|
|
# define CONFIG_RBTREE
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_PARTITIONS)
|
|
/* MTD partitions */
|
|
#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
|
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#define MTDIDS_DEFAULT "nor0=flash-0"
|
|
|
|
/* default mtd partition table */
|
|
#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\
|
|
"256k(env),3m(kernel),1m(romfs),"\
|
|
"1m(cramfs),-(jffs2)"
|
|
#endif
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
|
|
/* size of console buffer */
|
|
#define CONFIG_SYS_CBSIZE 512
|
|
/* print buffer size */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
/* max number of command args */
|
|
#define CONFIG_SYS_MAXARGS 15
|
|
#define CONFIG_SYS_LONGHELP
|
|
/* default load address */
|
|
#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
|
|
|
|
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
|
|
#define CONFIG_BOOTARGS "root=romfs"
|
|
#define CONFIG_HOSTNAME XILINX_BOARD_NAME
|
|
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
|
|
#define CONFIG_IPADDR 192.168.0.3
|
|
#define CONFIG_SERVERIP 192.168.0.5
|
|
#define CONFIG_GATEWAYIP 192.168.0.1
|
|
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
|
|
|
|
/* architecture dependent code */
|
|
#define CONFIG_SYS_USR_EXCEP /* user exception */
|
|
|
|
#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
|
|
"nor0=flash-0\0"\
|
|
"mtdparts=mtdparts=flash-0:"\
|
|
"256k(u-boot),256k(env),3m(kernel),"\
|
|
"1m(romfs),1m(cramfs),-(jffs2)\0"\
|
|
"nc=setenv stdout nc;"\
|
|
"setenv stdin nc\0" \
|
|
"serial=setenv stdout serial;"\
|
|
"setenv stdin serial\0"
|
|
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
#define CONFIG_NETCONSOLE
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
|
|
/* Use the HUSH parser */
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
|
|
/* Enable flat device tree support */
|
|
#define CONFIG_LMB 1
|
|
#define CONFIG_FIT 1
|
|
#define CONFIG_OF_LIBFDT 1
|
|
|
|
#if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC)
|
|
# define CONFIG_MII 1
|
|
# define CONFIG_CMD_MII 1
|
|
# define CONFIG_PHY_GIGE 1
|
|
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
|
|
# define CONFIG_PHYLIB 1
|
|
# define CONFIG_PHY_ATHEROS 1
|
|
# define CONFIG_PHY_BROADCOM 1
|
|
# define CONFIG_PHY_DAVICOM 1
|
|
# define CONFIG_PHY_LXT 1
|
|
# define CONFIG_PHY_MARVELL 1
|
|
# define CONFIG_PHY_MICREL 1
|
|
# define CONFIG_PHY_NATSEMI 1
|
|
# define CONFIG_PHY_REALTEK 1
|
|
# define CONFIG_PHY_VITESSE 1
|
|
#else
|
|
# undef CONFIG_MII
|
|
# undef CONFIG_CMD_MII
|
|
# undef CONFIG_PHYLIB
|
|
#endif
|
|
|
|
/* SPL part */
|
|
#define CONFIG_SPL
|
|
#define CONFIG_CMD_SPL
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
#define CONFIG_SPL_BOARD_INIT
|
|
|
|
#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
|
|
|
|
#define CONFIG_SPL_RAM_DEVICE
|
|
#define CONFIG_SPL_NOR_SUPPORT
|
|
|
|
/* for booting directly linux */
|
|
#define CONFIG_SPL_OS_BOOT
|
|
|
|
#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \
|
|
0x60000)
|
|
#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
|
|
0x40000)
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \
|
|
0x1000000)
|
|
|
|
/* SP location before relocation, must use scratch RAM */
|
|
/* BRAM start */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x0
|
|
/* BRAM size - will be generated */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
|
|
/* Stack pointer prior relocation, must situated at on-chip RAM */
|
|
#define CONFIG_SYS_SPL_MALLOC_END (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100
|
|
|
|
/*
|
|
* The main reason to do it in this way is that MALLOC_START
|
|
* can't be defined - common/spl/spl.c
|
|
*/
|
|
#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0)
|
|
# define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_SPL_MALLOC_END - \
|
|
CONFIG_SYS_SPL_MALLOC_SIZE)
|
|
# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_START
|
|
#else
|
|
# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_END
|
|
#endif
|
|
|
|
/* Just for sure that there is a space for stack */
|
|
#define CONFIG_SPL_STACK_SIZE 0x100
|
|
|
|
#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
|
|
|
|
#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
|
|
CONFIG_SYS_INIT_RAM_ADDR - \
|
|
GENERATED_GBL_DATA_SIZE - \
|
|
CONFIG_SYS_SPL_MALLOC_SIZE - \
|
|
CONFIG_SPL_STACK_SIZE)
|
|
|
|
#endif /* __CONFIG_H */
|