mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
cdb23792e8
Remove platform CONFIG_SYS_HZ definition for configs A-Z*. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
609 lines
23 KiB
C
609 lines
23 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
/*************************************************************************
|
|
* (c) 2004 esd gmbh Hannover
|
|
*
|
|
*
|
|
* from db64360.h file
|
|
* by Reinhard Arlt reinhard.arlt@esd-electronics.com
|
|
*
|
|
************************************************************************/
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* This define must be before the core.h include */
|
|
#define CONFIG_CPCI750 1 /* this is an CPCI750 board */
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#include <../board/Marvell/include/core.h>
|
|
#endif
|
|
/*-----------------------------------------------------*/
|
|
|
|
#include "../board/esd/cpci750/local.h"
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_750FX /* we have a 750FX (override local.h) */
|
|
|
|
#define CONFIG_CPCI750 1 /* this is an CPCI750 board */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xfff00000
|
|
|
|
#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */
|
|
|
|
#define CONFIG_MV64360_ECC /* enable ECC support */
|
|
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
/* which initialization functions to call for this board */
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_BOARD_PRE_INIT
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1
|
|
|
|
#define CONFIG_SYS_BOARD_NAME "CPCI750"
|
|
#define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX"
|
|
|
|
/*#define CONFIG_SYS_HUSH_PARSER*/
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
|
|
|
|
#define CONFIG_CMDLINE_EDITING /* add command line history */
|
|
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
|
|
|
|
/* Define which ETH port will be used for connecting the network */
|
|
#define CONFIG_SYS_ETH_PORT ETH_0
|
|
|
|
/*
|
|
* The following defines let you select what serial you want to use
|
|
* for your console driver.
|
|
*
|
|
* what to do:
|
|
* to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
|
|
* cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
|
|
* to 0 below.
|
|
*
|
|
* to use the MPSC, #define CONFIG_MPSC. If you have wired up another
|
|
* mpsc channel, change CONFIG_MPSC_PORT to the desired value.
|
|
*/
|
|
#define CONFIG_MPSC
|
|
#define CONFIG_MPSC_PORT 0
|
|
|
|
/* to change the default ethernet port, use this define (options: 0, 1, 2) */
|
|
#define MV_ETH_DEVS 1
|
|
#define CONFIG_ETHER_PORT 0
|
|
|
|
#undef CONFIG_ETHER_PORT_MII /* use RMII */
|
|
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot disabled */
|
|
|
|
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
|
|
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* New bootcommands for Marvell CPCI750 c 2002 Ingo Assmus
|
|
*/
|
|
|
|
#define CONFIG_IPADDR "192.168.0.185"
|
|
|
|
#define CONFIG_SERIAL "AA000001"
|
|
#define CONFIG_SERVERIP "10.0.0.79"
|
|
#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s"
|
|
|
|
#define CONFIG_TESTDRAMDATA y
|
|
#define CONFIG_TESTDRAMADDRESS n
|
|
#define CONFIG_TESETDRAMWALK n
|
|
|
|
/* ----------------------------------------------------------------------------- */
|
|
|
|
|
|
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
#undef CONFIG_ALTIVEC /* undef to disable */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_EXT2
|
|
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_USE_CPCIDVI
|
|
|
|
#ifdef CONFIG_USE_CPCIDVI
|
|
#define CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_CT69000
|
|
#define CONFIG_CFB_CONSOLE
|
|
#define CONFIG_VIDEO_SW_CURSOR
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_I8042_KBD
|
|
#define CONFIG_SYS_ISA_IO 0
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_I2C_MULTI_EEPROMS
|
|
#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed default */
|
|
|
|
#define CONFIG_PRAM 0
|
|
|
|
#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
/*#define CONFIG_SYS_MEMTEST_START 0x00400000*/ /* memtest works on */
|
|
/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */
|
|
/*#define CONFIG_SYS_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */
|
|
|
|
/*
|
|
#define CONFIG_SYS_DRAM_TEST
|
|
* DRAM tests
|
|
* CONFIG_SYS_DRAM_TEST - enables the following tests.
|
|
*
|
|
* CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
|
|
* Environment variable 'test_dram_data' must be
|
|
* set to 'y'.
|
|
* CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
|
|
* addressable. Environment variable
|
|
* 'test_dram_address' must be set to 'y'.
|
|
* CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
|
|
* This test takes about 6 minutes to test 64 MB.
|
|
* Environment variable 'test_dram_walk' must be
|
|
* set to 'y'.
|
|
*/
|
|
#define CONFIG_SYS_DRAM_TEST
|
|
#if defined(CONFIG_SYS_DRAM_TEST)
|
|
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
|
|
/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */
|
|
#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
|
|
#define CONFIG_SYS_DRAM_TEST_DATA
|
|
#define CONFIG_SYS_DRAM_TEST_ADDRESS
|
|
#define CONFIG_SYS_DRAM_TEST_WALK
|
|
#endif /* CONFIG_SYS_DRAM_TEST */
|
|
|
|
#define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */
|
|
#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
|
|
|
|
#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
#define CONFIG_SYS_TCLK 133000000
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area
|
|
*/
|
|
|
|
/*
|
|
* When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
|
|
* To an unused memory region. The stack will remain in cache until RAM
|
|
* is initialized
|
|
*/
|
|
#undef CONFIG_SYS_INIT_RAM_LOCK
|
|
/* #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */
|
|
/* #define CONFIG_SYS_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xf1080000 /* unused memory region */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define RELOCATE_INTERNAL_RAM_ADDR
|
|
#ifdef RELOCATE_INTERNAL_RAM_ADDR
|
|
/*#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xfba00000*/
|
|
#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf1080000
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
/* Dummies for BAT 4-7 */
|
|
#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */
|
|
#define CONFIG_SYS_SDRAM2_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM3_BASE 0x30000000
|
|
#define CONFIG_SYS_SDRAM4_BASE 0x40000000
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#define CONFIG_SYS_MONITOR_BASE 0xfff00000
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH related
|
|
*----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
|
#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of flash banks */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max number of memory banks */
|
|
#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 /* size of flash bank */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
|
|
CONFIG_SYS_FLASH_BASE + 1*CONFIG_SYS_FLASH_INCREMENT, \
|
|
CONFIG_SYS_FLASH_BASE + 2*CONFIG_SYS_FLASH_INCREMENT, \
|
|
CONFIG_SYS_FLASH_BASE + 3*CONFIG_SYS_FLASH_INCREMENT }
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* show if bank is empty */
|
|
|
|
/* areas to map different things with the GT in physical space */
|
|
#define CONFIG_SYS_DRAM_BANKS 4
|
|
|
|
/* What to put in the bats. */
|
|
#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
|
|
|
|
/* Peripheral Device section */
|
|
|
|
/*******************************************************/
|
|
/* We have on the cpci750 Board : */
|
|
/* GT-Chipset Register Area */
|
|
/* GT-Chipset internal SRAM 256k */
|
|
/* SRAM on external device module */
|
|
/* Real time clock on external device module */
|
|
/* dobble UART on external device module */
|
|
/* Data flash on external device module */
|
|
/* Boot flash on external device module */
|
|
/*******************************************************/
|
|
#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
|
|
#define CONFIG_SYS_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */
|
|
|
|
#undef MARVEL_STANDARD_CFG
|
|
#ifndef MARVEL_STANDARD_CFG
|
|
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
|
|
#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */
|
|
/*#define CONFIG_SYS_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */
|
|
#define CONFIG_SYS_INT_SRAM_BASE 0xf1080000 /* GT offers 256k internal fast SRAM */
|
|
|
|
#define CONFIG_SYS_BOOT_SPACE 0xff000000 /* BOOT_CS0 flash 0 */
|
|
#define CONFIG_SYS_DEV0_SPACE 0xfc000000 /* DEV_CS0 flash 1 */
|
|
#define CONFIG_SYS_DEV1_SPACE 0xfd000000 /* DEV_CS1 flash 2 */
|
|
#define CONFIG_SYS_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */
|
|
#define CONFIG_SYS_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */
|
|
|
|
#define CONFIG_SYS_BOOT_SIZE _16M /* cpci750 flash 0 */
|
|
#define CONFIG_SYS_DEV0_SIZE _16M /* cpci750 flash 1 */
|
|
#define CONFIG_SYS_DEV1_SIZE _16M /* cpci750 flash 2 */
|
|
#define CONFIG_SYS_DEV2_SIZE _16M /* cpci750 flash 3 */
|
|
#define CONFIG_SYS_DEV3_SIZE _16M /* cpci750 nvram/can */
|
|
|
|
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
|
|
#endif
|
|
|
|
/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
|
|
#define CONFIG_SYS_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */
|
|
#define CONFIG_SYS_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */
|
|
#define CONFIG_SYS_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */
|
|
#define CONFIG_SYS_DEV3_PAR 0x8FCFFFFF /* nvram/can */
|
|
#define CONFIG_SYS_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */
|
|
|
|
/* c 4 a 8 2 4 1 c */
|
|
/* 33 22|2222|22 22|111 1|11 11|1 1 | | */
|
|
/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
|
|
/* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */
|
|
/* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */
|
|
|
|
|
|
/* MPP Control MV64360 Appendix P P. 632*/
|
|
#define CONFIG_SYS_MPP_CONTROL_0 0x00002222 /* */
|
|
#define CONFIG_SYS_MPP_CONTROL_1 0x11110000 /* */
|
|
#define CONFIG_SYS_MPP_CONTROL_2 0x11111111 /* */
|
|
#define CONFIG_SYS_MPP_CONTROL_3 0x00001111 /* */
|
|
/* #define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102*/ /* */
|
|
|
|
|
|
#define CONFIG_SYS_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/
|
|
|
|
/* setup new config_value for MV64360 DDR-RAM To_do !! */
|
|
/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200*/ /* 0x448 */
|
|
/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e14400*/ /* 0x1400 */
|
|
/* GB has high prio.
|
|
idma has low prio
|
|
MPSC has low prio
|
|
pci has low prio 1 and 2
|
|
cpu has high prio
|
|
Data DQS pins == eight (DQS[7:0] foe x8 and x16 devices
|
|
ECC disable
|
|
non registered DRAM */
|
|
/* 31:26 25:22 21:20 19 18 17 16 */
|
|
/* 100001 0000 010 0 0 0 0 */
|
|
/* refresh_count=0x400
|
|
phisical interleaving disable
|
|
virtual interleaving enable */
|
|
/* 15 14 13:0 */
|
|
/* 0 1 0x400 */
|
|
# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
|
|
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
|
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
|
|
|
#define CONFIG_PCI /* include pci support */
|
|
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
|
|
|
|
/* PCI MEMORY MAP section */
|
|
#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
|
|
#define CONFIG_SYS_PCI0_MEM_SIZE _128M
|
|
#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
|
|
#define CONFIG_SYS_PCI1_MEM_SIZE _128M
|
|
|
|
#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
|
|
#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
|
|
|
|
/* PCI I/O MAP section */
|
|
#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
|
|
#define CONFIG_SYS_PCI0_IO_SIZE _16M
|
|
#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
|
|
#define CONFIG_SYS_PCI1_IO_SIZE _16M
|
|
|
|
#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
|
|
#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
|
|
#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
|
|
#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
|
|
|
|
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
|
|
|
|
#if defined (CONFIG_750CX)
|
|
#define CONFIG_SYS_PCI_IDSEL 0x0
|
|
#else
|
|
#define CONFIG_SYS_PCI_IDSEL 0x30
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* IDE/ATA stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
#define CONFIG_IDE_RESET /* no reset for ide supported */
|
|
#define CONFIG_IDE_PREINIT /* check for units */
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 1 IDE busses */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0
|
|
#define CONFIG_SYS_ATA_IDE1_OFFSET 0
|
|
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
|
|
#ifndef __ASSEMBLY__
|
|
int ata_device(int dev);
|
|
#endif
|
|
#define ATA_DEVICE(dev) ata_device(dev)
|
|
#define CONFIG_ATAPI 1
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Initial BAT mappings
|
|
*/
|
|
|
|
/* NOTES:
|
|
* 1) GUARDED and WRITE_THRU not allowed in IBATS
|
|
* 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
|
|
*/
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
|
|
|
|
/* init ram */
|
|
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
|
|
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
|
|
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
|
|
|
|
/* PCI0, PCI1 in one BAT */
|
|
#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
|
|
#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
|
|
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* GT regs, bootrom, all the devices, PCI I/O */
|
|
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
|
|
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
|
|
#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
|
|
|
|
/*
|
|
* 750FX IBAT and DBAT pairs (To_do: define regins for I(D)BAT4 - I(D)BAT7)
|
|
* IBAT4 and DBAT4
|
|
* FIXME: ingo disable BATs for Linux Kernel
|
|
*/
|
|
/* #undef SETUP_HIGH_BATS_FX750 */ /* don't initialize BATS 4-7 */
|
|
#define SETUP_HIGH_BATS_FX750 /* initialize BATS 4-7 */
|
|
|
|
#ifdef SETUP_HIGH_BATS_FX750
|
|
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
|
|
|
|
/* IBAT5 and DBAT5 */
|
|
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
|
|
|
/* IBAT6 and DBAT6 */
|
|
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
|
|
|
/* IBAT7 and DBAT7 */
|
|
#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
|
|
|
#else /* set em out of range for Linux !!!!!!!!!!! */
|
|
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
|
|
|
|
/* IBAT5 and DBAT5 */
|
|
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT4U
|
|
|
|
/* IBAT6 and DBAT6 */
|
|
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT4U
|
|
|
|
/* IBAT7 and DBAT7 */
|
|
#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT4U
|
|
|
|
#endif
|
|
/* FIXME: ingo end: disable BATs for Linux Kernel */
|
|
|
|
/* I2C addresses for the two DIMM SPD chips */
|
|
#define DIMM0_I2C_ADDR 0x51
|
|
#define DIMM1_I2C_ADDR 0x52
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_SYS_BOOT_FLASH_WIDTH 2 /* 16 bit */
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */
|
|
|
|
#if 0
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
|
|
/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
|
|
#endif
|
|
|
|
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x050
|
|
#define CONFIG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */
|
|
#define CONFIG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/
|
|
|
|
#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
|
|
#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */
|
|
#define CONFIG_SYS_VXWORKS_MAC_PTR (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-0x40)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* L2CR setup -- make sure this is right for your board!
|
|
* look in include/mpc74xx.h for the defines used here
|
|
*/
|
|
|
|
/*#define CONFIG_SYS_L2*/
|
|
#undef CONFIG_SYS_L2
|
|
|
|
/* #ifdef CONFIG_750CX*/
|
|
#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
|
|
#define L2_INIT 0
|
|
#else
|
|
#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
|
|
L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
|
|
#endif
|
|
|
|
#define L2_ENABLE (L2_INIT | L2CR_L2E)
|
|
|
|
#define CONFIG_SYS_BOARD_ASM_INIT 1
|
|
|
|
#define CPCI750_SLAVE_TEST (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
|
|
#define CPCI750_ECC_TEST (((in8(0xf0300000) & 0x02) == 0) ? 1 : 0)
|
|
#define CONFIG_SYS_PLD_VER 0xf0e00000
|
|
|
|
#define CONFIG_OF_LIBFDT 1
|
|
|
|
#endif /* __CONFIG_H */
|