mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-29 02:42:16 +00:00
39236acb0d
With sf update fixed to support unaligned start offset, use plain sf update to update the bootloader in SPI NOR. This also helps avoid the case where not enough SPI NOR has been erased and the bootloader has been written to unerased area, and thus corrupted. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
84 lines
2 KiB
C
84 lines
2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* DHCOM DH-iMX6 PDK board configuration
|
|
*
|
|
* Copyright (C) 2017 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#ifndef __DH_IMX6_CONFIG_H
|
|
#define __DH_IMX6_CONFIG_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#include "mx6_common.h"
|
|
|
|
/*
|
|
* SPI NOR layout:
|
|
* 0x00_0000-0x00_ffff ... U-Boot SPL
|
|
* 0x01_0000-0x0f_ffff ... U-Boot
|
|
* 0x10_0000-0x10_ffff ... U-Boot env #1
|
|
* 0x11_0000-0x11_ffff ... U-Boot env #2
|
|
* 0x12_0000-0x1f_ffff ... UNUSED
|
|
*/
|
|
|
|
/* SPL */
|
|
#include "imx6_spl.h" /* common IMX6 SPL configuration */
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
/* MMC Configs */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 3
|
|
|
|
/* UART */
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
|
|
/* USB Configs */
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
/* USB Gadget (DFU, UMS) */
|
|
#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
|
|
/* USB IDs */
|
|
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
|
|
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
|
|
#endif
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console=ttymxc0,115200\0" \
|
|
"fdt_addr=0x18000000\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"kernel_addr_r=0x10008000\0" \
|
|
"fdt_addr_r=0x13000000\0" \
|
|
"ramdisk_addr_r=0x18000000\0" \
|
|
"scriptaddr=0x14000000\0" \
|
|
"fdtfile=imx6q-dhcom-pdk2.dtb\0"\
|
|
"update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \
|
|
"load mmc 0:1 ${loadaddr} /boot/u-boot-with-spl.imx && "\
|
|
"sf probe && sf update ${loadaddr} 0x400 ${filesize}\0" \
|
|
BOOTENV
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(MMC, mmc, 2) \
|
|
func(USB, usb, 1) \
|
|
func(SATA, sata, 0) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
/* Environment */
|
|
|
|
#endif /* __DH_IMX6_CONFIG_H */
|