Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 23:33:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-omap2/am33xx/board.c
Michal Suchanek c726fc01cf dm: treewide: Use uclass_first_device_err when accessing one device 
There is a number of users that use uclass_first_device to access the
first and (assumed) only device in uclass.

Some check the return value of uclass_first_device and also that a
device was returned which is exactly what uclass_first_device_err does.

Some are not checking that a device was returned and can potentially
crash if no device exists in the uclass. Finally there is one that
returns NULL on error either way.

Convert all of these to use uclass_first_device_err instead, the return
value will be removed from uclass_first_device in a later patch.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-17 21:17:12 -06:00

538 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* board.c
*
* Common board functions for AM33XX based boards
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*/
#include <common.h>
#include <dm.h>
#include <debug_uart.h>
#include <errno.h>
#include <event.h>
#include <init.h>
#include <net.h>
#include <ns16550.h>
#include <omap3_spi.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/i2c.h>
#if IS_ENABLED(CONFIG_TARGET_AM335X_GUARDIAN)
#include <asm/arch/mem-guardian.h>
#else
#include <asm/arch/mem.h>
#endif
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
#include <asm/omap_common.h>
#include <i2c.h>
#include <miiphy.h>
#include <cpsw.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/compiler.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
#include <asm/omap_musb.h>
#include <asm/davinci_rtc.h>
#define AM43XX_EMIF_BASE 0x4C000000
#define AM43XX_SDRAM_CONFIG_OFFSET 0x8
#define AM43XX_SDRAM_TYPE_MASK 0xE0000000
#define AM43XX_SDRAM_TYPE_SHIFT 29
#define AM43XX_SDRAM_TYPE_DDR3 3
#define AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET 0xDC
#define AM43XX_RDWRLVLFULL_START 0x80000000
/* SPI flash. */
#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
#define AM33XX_SPI0_BASE 0x48030000
#define AM33XX_SPI0_OFFSET (AM33XX_SPI0_BASE + OMAP4_MCSPI_REG_OFFSET)
#endif
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
sdram_init();
#endif
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
return 0;
}
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_plat am33xx_serial[] = {
{ .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# ifdef CONFIG_SYS_NS16550_COM2
{ .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# ifdef CONFIG_SYS_NS16550_COM3
{ .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# endif
# endif
};
U_BOOT_DRVINFOS(am33xx_uarts) = {
{ "ns16550_serial", &am33xx_serial[0] },
# ifdef CONFIG_SYS_NS16550_COM2
{ "ns16550_serial", &am33xx_serial[1] },
# ifdef CONFIG_SYS_NS16550_COM3
{ "ns16550_serial", &am33xx_serial[2] },
{ "ns16550_serial", &am33xx_serial[3] },
{ "ns16550_serial", &am33xx_serial[4] },
{ "ns16550_serial", &am33xx_serial[5] },
# endif
# endif
};
#if CONFIG_IS_ENABLED(DM_I2C)
static const struct omap_i2c_plat am33xx_i2c[] = {
{ I2C_BASE1, 100000, OMAP_I2C_REV_V2},
{ I2C_BASE2, 100000, OMAP_I2C_REV_V2},
{ I2C_BASE3, 100000, OMAP_I2C_REV_V2},
};
U_BOOT_DRVINFOS(am33xx_i2c) = {
{ "i2c_omap", &am33xx_i2c[0] },
{ "i2c_omap", &am33xx_i2c[1] },
{ "i2c_omap", &am33xx_i2c[2] },
};
#endif
#if CONFIG_IS_ENABLED(DM_GPIO)
static const struct omap_gpio_plat am33xx_gpio[] = {
{ 0, AM33XX_GPIO0_BASE },
{ 1, AM33XX_GPIO1_BASE },
{ 2, AM33XX_GPIO2_BASE },
{ 3, AM33XX_GPIO3_BASE },
#ifdef CONFIG_AM43XX
{ 4, AM33XX_GPIO4_BASE },
{ 5, AM33XX_GPIO5_BASE },
#endif
};
U_BOOT_DRVINFOS(am33xx_gpios) = {
{ "gpio_omap", &am33xx_gpio[0] },
{ "gpio_omap", &am33xx_gpio[1] },
{ "gpio_omap", &am33xx_gpio[2] },
{ "gpio_omap", &am33xx_gpio[3] },
#ifdef CONFIG_AM43XX
{ "gpio_omap", &am33xx_gpio[4] },
{ "gpio_omap", &am33xx_gpio[5] },
#endif
};
#endif
#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct omap3_spi_plat omap3_spi_pdata = {
.regs = (struct mcspi *)AM33XX_SPI0_OFFSET,
.pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT,
};
U_BOOT_DRVINFO(am33xx_spi) = {
.name = "omap3_spi",
.plat = &omap3_spi_pdata,
};
#endif
#endif
#if !CONFIG_IS_ENABLED(DM_GPIO)
static const struct gpio_bank gpio_bank_am33xx[] = {
{ (void *)AM33XX_GPIO0_BASE },
{ (void *)AM33XX_GPIO1_BASE },
{ (void *)AM33XX_GPIO2_BASE },
{ (void *)AM33XX_GPIO3_BASE },
#ifdef CONFIG_AM43XX
{ (void *)AM33XX_GPIO4_BASE },
{ (void *)AM33XX_GPIO5_BASE },
#endif
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
#endif
#if defined(CONFIG_MMC_OMAP_HS)
int cpu_mmc_init(struct bd_info *bis)
{
int ret;
ret = omap_mmc_init(0, 0, 0, -1, -1);
if (ret)
return ret;
return omap_mmc_init(1, 0, 0, -1, -1);
}
#endif
/*
* RTC only with DDR in self-refresh mode magic value, checked against during
* boot to see if we have a valid config. This should be in sync with the value
* that will be in drivers/soc/ti/pm33xx.c.
*/
#define RTC_MAGIC_VAL 0x8cd0
/* Board type field bit shift for RTC only with DDR in self-refresh mode */
#define RTC_BOARD_TYPE_SHIFT 16
/* AM33XX has two MUSB controllers which can be host or gadget */
#if (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
defined(CONFIG_SPL_BUILD)
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
.dyn_fifo = 1,
.num_eps = 16,
.ram_bits = 12,
};
#ifdef CONFIG_AM335X_USB0
static struct ti_musb_plat usb0 = {
.base = (void *)USB0_OTG_BASE,
.ctrl_mod_base = &((struct ctrl_dev *)CTRL_DEVICE_BASE)->usb_ctrl0,
.plat = {
.config = &musb_config,
.power = 50,
.platform_ops = &musb_dsps_ops,
},
};
#endif
#ifdef CONFIG_AM335X_USB1
static struct ti_musb_plat usb1 = {
.base = (void *)USB1_OTG_BASE,
.ctrl_mod_base = &((struct ctrl_dev *)CTRL_DEVICE_BASE)->usb_ctrl1,
.plat = {
.config = &musb_config,
.power = 50,
.platform_ops = &musb_dsps_ops,
},
};
#endif
U_BOOT_DRVINFOS(am33xx_usbs) = {
#ifdef CONFIG_AM335X_USB0_PERIPHERAL
{ "ti-musb-peripheral", &usb0 },
#elif defined(CONFIG_AM335X_USB0_HOST)
{ "ti-musb-host", &usb0 },
#endif
#ifdef CONFIG_AM335X_USB1_PERIPHERAL
{ "ti-musb-peripheral", &usb1 },
#elif defined(CONFIG_AM335X_USB1_HOST)
{ "ti-musb-host", &usb1 },
#endif
};
int arch_misc_init(void)
{
return 0;
}
#else /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
int arch_misc_init(void)
{
struct udevice *dev;
int ret;
ret = uclass_first_device_err(UCLASS_MISC, &dev);
if (ret)
return ret;
#if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER)
ret = usb_ether_init();
if (ret) {
pr_err("USB ether init failed\n");
return ret;
}
#endif
return 0;
}
#endif /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) || \
(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT))
static void rtc32k_unlock(struct davinci_rtc *rtc)
{
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(RTC_KICK0R_WE, &rtc->kick0r);
writel(RTC_KICK1R_WE, &rtc->kick1r);
}
#endif
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
/*
* Write contents of the RTC_SCRATCH1 register based on board type
* Two things are passed
* on. First 16 bits (0:15) are written with RTC_MAGIC value. Once the
* control gets to kernel, kernel reads the scratchpad register and gets to
* know that bootloader has rtc_only support.
*
* Second important thing is the board type (16:31). This is needed in the
* rtc_only boot where in we want to avoid costly i2c reads to eeprom to
* identify the board type and we go ahead and copy the board strings to
* am43xx_board_name.
*/
void update_rtc_magic(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
u32 magic = RTC_MAGIC_VAL;
magic |= (rtc_only_get_board_type() << RTC_BOARD_TYPE_SHIFT);
rtc32k_unlock(rtc);
/* write magic */
writel(magic, &rtc->scratch1);
}
#endif
/*
* In the case of non-SPL based booting we'll want to call these
* functions a tiny bit later as it will require gd to be set and cleared
* and that's not true in s_init in this case so we cannot do it there.
*/
int board_early_init_f(void)
{
set_mux_conf_regs();
prcm_init();
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
update_rtc_magic();
#endif
return 0;
}
/*
* This function is the place to do per-board things such as ramp up the
* MPU clock frequency.
*/
__weak void am33xx_spl_board_init(void)
{
}
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
static void rtc32k_enable(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
rtc32k_unlock(rtc);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
#endif
static void uart_soft_reset(void)
{
struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
u32 regval;
regval = readl(&uart_base->uartsyscfg);
regval |= UART_RESET;
writel(regval, &uart_base->uartsyscfg);
while ((readl(&uart_base->uartsyssts) &
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
;
/* Disable smart idle */
regval = readl(&uart_base->uartsyscfg);
regval |= UART_SMART_IDLE_EN;
writel(regval, &uart_base->uartsyscfg);
}
static void watchdog_disable(void)
{
struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
writel(0xAAAA, &wdtimer->wdtwspr);
while (readl(&wdtimer->wdtwwps) != 0x0)
;
writel(0x5555, &wdtimer->wdtwspr);
while (readl(&wdtimer->wdtwwps) != 0x0)
;
}
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
/*
* Check if we are executing rtc-only + DDR mode, and resume from it if needed
*/
static void rtc_only(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
struct prm_device_inst *prm_device =
(struct prm_device_inst *)PRM_DEVICE_INST;
u32 scratch1, sdrc;
void (*resume_func)(void);
scratch1 = readl(&rtc->scratch1);
/*
* Check RTC scratch against RTC_MAGIC_VAL, RTC_MAGIC_VAL is only
* written to this register when we want to wake up from RTC only
* with DDR in self-refresh mode. Contents of the RTC_SCRATCH1:
* bits 0-15: RTC_MAGIC_VAL
* bits 16-31: board type (needed for sdram_init)
*/
if ((scratch1 & 0xffff) != RTC_MAGIC_VAL)
return;
rtc32k_unlock(rtc);
/* Clear RTC magic */
writel(0, &rtc->scratch1);
/*
* Update board type based on value stored on RTC_SCRATCH1, this
* is done so that we don't need to read the board type from eeprom
* over i2c bus which is expensive
*/
rtc_only_update_board_type(scratch1 >> RTC_BOARD_TYPE_SHIFT);
/*
* Enable EMIF_DEVOFF in PRCM_PRM_EMIF_CTRL to indicate to EMIF we
* are resuming from self-refresh. This avoids an unnecessary re-init
* of the DDR. The re-init takes time and we would need to wait for
* it to complete before accessing DDR to avoid L3 NOC errors.
*/
writel(EMIF_CTRL_DEVOFF, &prm_device->emif_ctrl);
rtc_only_prcm_init();
sdram_init();
/* Check EMIF4D_SDRAM_CONFIG[31:29] SDRAM_TYPE */
/* Only perform leveling if SDRAM_TYPE = 3 (DDR3) */
sdrc = readl(AM43XX_EMIF_BASE + AM43XX_SDRAM_CONFIG_OFFSET);
sdrc &= AM43XX_SDRAM_TYPE_MASK;
sdrc >>= AM43XX_SDRAM_TYPE_SHIFT;
if (sdrc == AM43XX_SDRAM_TYPE_DDR3) {
writel(AM43XX_RDWRLVLFULL_START,
AM43XX_EMIF_BASE +
AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET);
mdelay(1);
am43xx_wait:
sdrc = readl(AM43XX_EMIF_BASE +
AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET);
if (sdrc == AM43XX_RDWRLVLFULL_START)
goto am43xx_wait;
}
resume_func = (void *)readl(&rtc->scratch0);
if (resume_func)
resume_func();
}
#endif
void s_init(void)
{
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
rtc_only();
#endif
}
void early_system_init(void)
{
/*
* The ROM will only have set up sufficient pinmux to allow for the
* first 4KiB NOR to be read, we must finish doing what we know of
* the NOR mux in this space in order to continue.
*/
#ifdef CONFIG_NOR_BOOT
enable_norboot_pin_mux();
#endif
watchdog_disable();
set_uart_mux_conf();
setup_early_clocks();
uart_soft_reset();
#ifdef CONFIG_SPL_BUILD
/*
* Save the boot parameters passed from romcode.
* We cannot delay the saving further than this,
* to prevent overwrites.
*/
save_omap_boot_params();
#endif
#ifdef CONFIG_DEBUG_UART_OMAP
debug_uart_init();
#endif
#ifdef CONFIG_SPL_BUILD
spl_early_init();
#endif
#ifdef CONFIG_TI_I2C_BOARD_DETECT
do_board_detect();
#endif
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
/* Enable RTC32K clock */
rtc32k_enable();
#endif
}
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong dummy)
{
hw_data_init();
early_system_init();
board_early_init_f();
sdram_init();
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
}
#endif
#endif
static int am33xx_dm_post_init(void *ctx, struct event *event)
{
hw_data_init();
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
early_system_init();
#endif
return 0;
}
EVENT_SPY(EVT_DM_POST_INIT, am33xx_dm_post_init);
Reference in a new issue View git blame Copy permalink