mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
cf8ddacffc
T1042 has internal display interface unit (DIU) for driving video.
T1042RDB supports video mode via
-LCD using TI enconder
-HDMI type interface via HDMI encoder
Chrontel, CH7301C encoder which is I2C programmable is used
as HDMI connector on T1042RDB.
This patch add support to
-enable Video interface for T1042RDB
-route qixis multiplexing to enable DIU-HDMI interface on board
-program DIU pixel clock gerenartor for T1042
-program HDMI encoder via I2C on board
This patch refer to the upstream diu patch
(337b0c52b3) for T1040qds.
Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
[York Sun: resolve conflict and move changes to T104xRDB.h]
Reviewed-by: York Sun <yorksun@freescale.com>
84 lines
2.1 KiB
C
84 lines
2.1 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
* Author: Priyanka Jain <Priyanka.Jain@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <fsl_diu_fb.h>
|
|
#include <linux/ctype.h>
|
|
#include <video_fb.h>
|
|
|
|
#include "../common/diu_ch7301.h"
|
|
|
|
#include "cpld.h"
|
|
#include "t104xrdb.h"
|
|
|
|
/*
|
|
* DIU Area Descriptor
|
|
*
|
|
* Note that we need to byte-swap the value before it's written to the AD
|
|
* register. So even though the registers don't look like they're in the same
|
|
* bit positions as they are on the MPC8610, the same value is written to the
|
|
* AD register on the MPC8610 and on the P1022.
|
|
*/
|
|
#define AD_BYTE_F 0x10000000
|
|
#define AD_ALPHA_C_SHIFT 25
|
|
#define AD_BLUE_C_SHIFT 23
|
|
#define AD_GREEN_C_SHIFT 21
|
|
#define AD_RED_C_SHIFT 19
|
|
#define AD_PIXEL_S_SHIFT 16
|
|
#define AD_COMP_3_SHIFT 12
|
|
#define AD_COMP_2_SHIFT 8
|
|
#define AD_COMP_1_SHIFT 4
|
|
#define AD_COMP_0_SHIFT 0
|
|
|
|
void diu_set_pixel_clock(unsigned int pixclock)
|
|
{
|
|
unsigned long speed_ccb, temp;
|
|
u32 pixval;
|
|
int ret;
|
|
|
|
speed_ccb = get_bus_freq(0);
|
|
temp = 1000000000 / pixclock;
|
|
temp *= 1000;
|
|
pixval = speed_ccb / temp;
|
|
|
|
/* Program HDMI encoder */
|
|
ret = diu_set_dvi_encoder(temp);
|
|
if (ret) {
|
|
puts("Failed to set DVI encoder\n");
|
|
return;
|
|
}
|
|
|
|
/* Program pixel clock */
|
|
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR,
|
|
((pixval << PXCK_BITS_START) & PXCK_MASK));
|
|
|
|
/* enable clock*/
|
|
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK |
|
|
((pixval << PXCK_BITS_START) & PXCK_MASK));
|
|
}
|
|
|
|
int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
|
|
{
|
|
u32 pixel_format;
|
|
u8 sw;
|
|
|
|
/*Configure Display ouput port as HDMI*/
|
|
sw = CPLD_READ(sfp_ctl_status);
|
|
CPLD_WRITE(sfp_ctl_status , sw & ~(CPLD_DIU_SEL_DFP));
|
|
|
|
pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
|
|
(0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
|
|
(2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
|
|
(8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
|
|
(8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
|
|
|
|
printf("DIU: Switching to monitor DVI @ %ux%u\n", xres, yres);
|
|
|
|
return fsl_diu_init(xres, yres, pixel_format, 0);
|
|
}
|