mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
e895a4b06f
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
210 lines
5 KiB
C
210 lines
5 KiB
C
/*
|
|
* (C) Copyright 2013
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* Copyright (c) 2011 IDS GmbH, Germany
|
|
* ids8313.c - ids8313 board support.
|
|
*
|
|
* Sergej Stepanov <ste@ids.de>
|
|
* Based on board/freescale/mpc8313erdb/mpc8313erdb.c
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc83xx.h>
|
|
#include <spi.h>
|
|
#include <libfdt.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
/** CPLD contains the info about:
|
|
* - board type: *pCpld & 0xF0
|
|
* - hw-revision: *pCpld & 0x0F
|
|
* - cpld-revision: *pCpld+1
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
char *pcpld = (char *)CONFIG_SYS_CPLD_BASE;
|
|
u8 u8Vers = readb(pcpld);
|
|
u8 u8Revs = readb(pcpld + 1);
|
|
|
|
printf("Board: ");
|
|
switch (u8Vers & 0xF0) {
|
|
case '\x40':
|
|
printf("CU73X");
|
|
break;
|
|
case '\x50':
|
|
printf("CC73X");
|
|
break;
|
|
default:
|
|
printf("unknown(0x%02X, 0x%02X)\n", u8Vers, u8Revs);
|
|
return 0;
|
|
}
|
|
printf("\nInfo: HW-Rev: %i, CPLD-Rev: %i\n",
|
|
u8Vers & 0x0F, u8Revs & 0xFF);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* fixed sdram init
|
|
*/
|
|
int fixed_sdram(unsigned long config)
|
|
{
|
|
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
u32 msize = CONFIG_SYS_DDR_SIZE << 20;
|
|
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
u32 msize_log2 = __ilog2(msize);
|
|
|
|
out_be32(&im->sysconf.ddrlaw[0].bar,
|
|
(CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000));
|
|
out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
|
|
out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
|
|
sync();
|
|
|
|
/*
|
|
* Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
|
|
* or the DDR2 controller may fail to initialize correctly.
|
|
*/
|
|
udelay(50000);
|
|
|
|
out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
|
|
out_be32(&im->ddr.cs_config[0], config);
|
|
|
|
/* currently we use only one CS, so disable the other banks */
|
|
out_be32(&im->ddr.cs_config[1], 0);
|
|
out_be32(&im->ddr.cs_config[2], 0);
|
|
out_be32(&im->ddr.cs_config[3], 0);
|
|
|
|
out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
|
|
out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
|
|
out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
|
|
out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
|
|
|
|
out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG);
|
|
out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2);
|
|
|
|
out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
|
|
out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2);
|
|
|
|
out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
|
|
out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
|
|
sync();
|
|
udelay(300);
|
|
|
|
/* enable DDR controller */
|
|
setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
|
|
/* now check the real size */
|
|
disable_addr_trans();
|
|
msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize);
|
|
enable_addr_trans();
|
|
#endif
|
|
return msize;
|
|
}
|
|
|
|
static int setup_sdram(void)
|
|
{
|
|
u32 msize = CONFIG_SYS_DDR_SIZE << 20;
|
|
long int size_01, size_02;
|
|
|
|
size_01 = fixed_sdram(CONFIG_SYS_DDR_CONFIG);
|
|
size_02 = fixed_sdram(CONFIG_SYS_DDR_CONFIG_256);
|
|
|
|
if (size_01 > size_02)
|
|
msize = fixed_sdram(CONFIG_SYS_DDR_CONFIG);
|
|
else
|
|
msize = size_02;
|
|
|
|
return msize;
|
|
}
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
fsl_lbc_t *lbc = &im->im_lbc;
|
|
u32 msize = 0;
|
|
|
|
if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
|
|
return -1;
|
|
|
|
msize = setup_sdram();
|
|
|
|
out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
|
|
out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
|
|
sync();
|
|
|
|
return msize;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* gpio mask for spi_cs */
|
|
#define IDSCPLD_SPI_CS_MASK 0x00000001
|
|
/* spi_cs multiplexed through cpld */
|
|
#define IDSCPLD_SPI_CS_BASE (CONFIG_SYS_CPLD_BASE + 0xf)
|
|
|
|
#if defined(CONFIG_MISC_INIT_R)
|
|
/* srp umcr mask for rts */
|
|
#define IDSUMCR_RTS_MASK 0x04
|
|
int misc_init_r(void)
|
|
{
|
|
/*srp*/
|
|
duart83xx_t *uart1 = &((immap_t *)CONFIG_SYS_IMMR)->duart[0];
|
|
duart83xx_t *uart2 = &((immap_t *)CONFIG_SYS_IMMR)->duart[1];
|
|
|
|
gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
|
|
u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
|
|
|
|
/* deactivate spi_cs channels */
|
|
out_8(spi_base, 0);
|
|
/* deactivate the spi_cs */
|
|
setbits_be32(&iopd->dir, IDSCPLD_SPI_CS_MASK);
|
|
/*srp - deactivate rts*/
|
|
out_8(&uart1->umcr, IDSUMCR_RTS_MASK);
|
|
out_8(&uart2->umcr, IDSUMCR_RTS_MASK);
|
|
|
|
|
|
gd->fdt_blob = (void *)CONFIG_SYS_FLASH_BASE;
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC8XXX_SPI
|
|
/*
|
|
* The following are used to control the SPI chip selects
|
|
*/
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && ((cs >= 0) && (cs <= 2));
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
|
|
u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
|
|
|
|
/* select the spi_cs channel */
|
|
out_8(spi_base, 1 << slave->cs);
|
|
/* activate the spi_cs */
|
|
clrbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
|
|
u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
|
|
|
|
/* select the spi_cs channel */
|
|
out_8(spi_base, 1 << slave->cs);
|
|
/* deactivate the spi_cs */
|
|
setbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
|
|
}
|
|
#endif /* CONFIG_HARD_SPI */
|