Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2025-01-25 11:25:17 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/cpu/blackfin/initcode.c
Mike Frysinger dbda2c65e5 Blackfin: re-architect initcode 
The single initcode function was growing unwieldy, so split it up the
distinct steps into their own function.  This should making digesting the
result much easier on people.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:26 -05:00

673 lines
18 KiB
C
Raw Blame History

/*
* initcode.c - Initialize the processor. This is usually entails things
* like external memory, voltage regulators, etc... Note that this file
* cannot make any function calls as it may be executed all by itself by
* the Blackfin's bootrom in LDR format.
*
* Copyright (c) 2004-2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#define BFIN_IN_INITCODE
#include <config.h>
#include <asm/blackfin.h>
#include <asm/mach-common/bits/bootrom.h>
#include <asm/mach-common/bits/core.h>
#include <asm/mach-common/bits/ebiu.h>
#include <asm/mach-common/bits/pll.h>
#include <asm/mach-common/bits/uart.h>
#include "serial.h"
__attribute__((always_inline))
static inline void serial_init(void)
{
#ifdef __ADSPBF54x__
# ifdef BFIN_BOOT_UART_USE_RTS
# define BFIN_UART_USE_RTS 1
# else
# define BFIN_UART_USE_RTS 0
# endif
if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
size_t i;
/* force RTS rather than relying on auto RTS */
bfin_write_UART1_MCR(bfin_read_UART1_MCR() | FCPOL);
/* Wait for the line to clear up. We cannot rely on UART
* registers as none of them reflect the status of the RSR.
* Instead, we'll sleep for ~10 bit times at 9600 baud.
* We can precalc things here by assuming boot values for
* PLL rather than loading registers and calculating.
* baud = SCLK / (16 ^ (1 - EDBO) * Divisor)
* EDB0 = 0
* Divisor = (SCLK / baud) / 16
* SCLK = baud * 16 * Divisor
* SCLK = (0x14 * CONFIG_CLKIN_HZ) / 5
* CCLK = (16 * Divisor * 5) * (9600 / 10)
* In reality, this will probably be just about 1 second delay,
* so assuming 9600 baud is OK (both as a very low and too high
* speed as this will buffer things enough).
*/
#define _NUMBITS (10) /* how many bits to delay */
#define _LOWBAUD (9600) /* low baud rate */
#define _SCLK ((0x14 * CONFIG_CLKIN_HZ) / 5) /* SCLK based on PLL */
#define _DIVISOR ((_SCLK / _LOWBAUD) / 16) /* UART DLL/DLH */
#define _NUMINS (3) /* how many instructions in loop */
#define _CCLK (((16 * _DIVISOR * 5) * (_LOWBAUD / _NUMBITS)) / _NUMINS)
i = _CCLK;
while (i--)
asm volatile("" : : : "memory");
}
#endif
if (BFIN_DEBUG_EARLY_SERIAL) {
int ucen = *pUART_GCTL & UCEN;
serial_early_init();
/* If the UART is off, that means we need to program
* the baud rate ourselves initially.
*/
if (ucen != UCEN)
serial_early_set_baud(CONFIG_BAUDRATE);
}
}
__attribute__((always_inline))
static inline void serial_deinit(void)
{
#ifdef __ADSPBF54x__
if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
/* clear forced RTS rather than relying on auto RTS */
bfin_write_UART1_MCR(bfin_read_UART1_MCR() & ~FCPOL);
}
#endif
}
__attribute__((always_inline))
static inline void serial_putc(char c)
{
if (!BFIN_DEBUG_EARLY_SERIAL)
return;
if (c == '\n')
serial_putc('\r');
*pUART_THR = c;
while (!(*pUART_LSR & TEMT))
continue;
}
/* Max SCLK can be 133MHz ... dividing that by (2*4) gives
* us a freq of 16MHz for SPI which should generally be
* slow enough for the slow reads the bootrom uses.
*/
#if !defined(CONFIG_SPI_FLASH_SLOW_READ) && \
((defined(__ADSPBF52x__) && __SILICON_REVISION__ >= 2) || \
(defined(__ADSPBF54x__) && __SILICON_REVISION__ >= 1))
# define BOOTROM_SUPPORTS_SPI_FAST_READ 1
#else
# define BOOTROM_SUPPORTS_SPI_FAST_READ 0
#endif
#ifndef CONFIG_SPI_BAUD_INITBLOCK
# define CONFIG_SPI_BAUD_INITBLOCK (BOOTROM_SUPPORTS_SPI_FAST_READ ? 2 : 4)
#endif
#ifdef SPI0_BAUD
# define bfin_write_SPI_BAUD bfin_write_SPI0_BAUD
#endif
/* PLL_DIV defines */
#ifndef CONFIG_PLL_DIV_VAL
# if (CONFIG_CCLK_DIV == 1)
# define CONFIG_CCLK_ACT_DIV CCLK_DIV1
# elif (CONFIG_CCLK_DIV == 2)
# define CONFIG_CCLK_ACT_DIV CCLK_DIV2
# elif (CONFIG_CCLK_DIV == 4)
# define CONFIG_CCLK_ACT_DIV CCLK_DIV4
# elif (CONFIG_CCLK_DIV == 8)
# define CONFIG_CCLK_ACT_DIV CCLK_DIV8
# else
# define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
# endif
# define CONFIG_PLL_DIV_VAL (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV)
#endif
#ifndef CONFIG_PLL_LOCKCNT_VAL
# define CONFIG_PLL_LOCKCNT_VAL 0x0300
#endif
#ifndef CONFIG_PLL_CTL_VAL
# define CONFIG_PLL_CTL_VAL (SPORT_HYST | (CONFIG_VCO_MULT << 9) | CONFIG_CLKIN_HALF)
#endif
#ifndef CONFIG_EBIU_RSTCTL_VAL
# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */
#endif
#if ((CONFIG_EBIU_RSTCTL_VAL & 0xFFFFFFC4) != 0)
# error invalid EBIU_RSTCTL value: must not set reserved bits
#endif
#ifndef CONFIG_EBIU_MBSCTL_VAL
# define CONFIG_EBIU_MBSCTL_VAL 0
#endif
#if defined(CONFIG_EBIU_DDRQUE_VAL) && ((CONFIG_EBIU_DDRQUE_VAL & 0xFFFF8000) != 0)
# error invalid EBIU_DDRQUE value: must not set reserved bits
#endif
/* Make sure our voltage value is sane so we don't blow up! */
#ifndef CONFIG_VR_CTL_VAL
# define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV)
# if defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__)
# define CCLK_VLEV_120 400000000
# define CCLK_VLEV_125 533000000
# elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
# define CCLK_VLEV_120 401000000
# define CCLK_VLEV_125 401000000
# elif defined(__ADSPBF561__)
# define CCLK_VLEV_120 300000000
# define CCLK_VLEV_125 501000000
# endif
# if BFIN_CCLK < CCLK_VLEV_120
# define CONFIG_VR_CTL_VLEV VLEV_120
# elif BFIN_CCLK < CCLK_VLEV_125
# define CONFIG_VR_CTL_VLEV VLEV_125
# else
# define CONFIG_VR_CTL_VLEV VLEV_130
# endif
# if defined(__ADSPBF52x__) /* TBD; use default */
# undef CONFIG_VR_CTL_VLEV
# define CONFIG_VR_CTL_VLEV VLEV_110
# elif defined(__ADSPBF54x__) /* TBD; use default */
# undef CONFIG_VR_CTL_VLEV
# define CONFIG_VR_CTL_VLEV VLEV_120
# elif defined(__ADSPBF538__) || defined(__ADSPBF539__) /* TBD; use default */
# undef CONFIG_VR_CTL_VLEV
# define CONFIG_VR_CTL_VLEV VLEV_125
# endif
# ifdef CONFIG_BFIN_MAC
# define CONFIG_VR_CTL_CLKBUF CLKBUFOE
# else
# define CONFIG_VR_CTL_CLKBUF 0
# endif
# if defined(__ADSPBF52x__)
# define CONFIG_VR_CTL_FREQ FREQ_1000
# else
# define CONFIG_VR_CTL_FREQ (GAIN_20 | FREQ_1000)
# endif
# define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ)
#endif
/* some parts do not have an on-chip voltage regulator */
#if defined(__ADSPBF51x__)
# define CONFIG_HAS_VR 0
# undef CONFIG_VR_CTL_VAL
# define CONFIG_VR_CTL_VAL 0
#else
# define CONFIG_HAS_VR 1
#endif
#if CONFIG_MEM_SIZE
#ifndef EBIU_RSTCTL
/* Blackfin with SDRAM */
#ifndef CONFIG_EBIU_SDBCTL_VAL
# if CONFIG_MEM_SIZE == 16
# define CONFIG_EBSZ_VAL EBSZ_16
# elif CONFIG_MEM_SIZE == 32
# define CONFIG_EBSZ_VAL EBSZ_32
# elif CONFIG_MEM_SIZE == 64
# define CONFIG_EBSZ_VAL EBSZ_64
# elif CONFIG_MEM_SIZE == 128
# define CONFIG_EBSZ_VAL EBSZ_128
# elif CONFIG_MEM_SIZE == 256
# define CONFIG_EBSZ_VAL EBSZ_256
# elif CONFIG_MEM_SIZE == 512
# define CONFIG_EBSZ_VAL EBSZ_512
# else
# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_SIZE
# endif
# if CONFIG_MEM_ADD_WDTH == 8
# define CONFIG_EBCAW_VAL EBCAW_8
# elif CONFIG_MEM_ADD_WDTH == 9
# define CONFIG_EBCAW_VAL EBCAW_9
# elif CONFIG_MEM_ADD_WDTH == 10
# define CONFIG_EBCAW_VAL EBCAW_10
# elif CONFIG_MEM_ADD_WDTH == 11
# define CONFIG_EBCAW_VAL EBCAW_11
# else
# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_ADD_WDTH
# endif
# define CONFIG_EBIU_SDBCTL_VAL (CONFIG_EBCAW_VAL | CONFIG_EBSZ_VAL | EBE)
#endif
#endif
#endif
/* Conflicting Column Address Widths Causes SDRAM Errors:
* EB2CAW and EB3CAW must be the same
*/
#if ANOMALY_05000362
# if ((CONFIG_EBIU_SDBCTL_VAL & 0x30000000) >> 8) != (CONFIG_EBIU_SDBCTL_VAL & 0x00300000)
# error "Anomaly 05000362: EB2CAW and EB3CAW must be the same"
# endif
#endif
__attribute__((always_inline)) static inline void
program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB)
{
serial_putc('a');
/* Save the clock pieces that are used in baud rate calculation */
if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
serial_putc('b');
*sdivB = bfin_read_PLL_DIV() & 0xf;
*vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f;
*divB = serial_early_get_div();
serial_putc('c');
}
serial_putc('d');
#ifdef CONFIG_HW_WATCHDOG
# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE
# define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000
# endif
/* Program the watchdog with an initial timeout of ~20 seconds.
* Hopefully that should be long enough to load the u-boot LDR
* (from wherever) and then the common u-boot code can take over.
* In bypass mode, the start.S would have already set a much lower
* timeout, so don't clobber that.
*/
if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) {
serial_putc('e');
bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE));
bfin_write_WDOG_CTL(0);
serial_putc('f');
}
#endif
serial_putc('g');
/* Blackfin bootroms use the SPI slow read opcode instead of the SPI
* fast read, so we need to slow down the SPI clock a lot more during
* boot. Once we switch over to u-boot's SPI flash driver, we'll
* increase the speed appropriately.
*/
if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
serial_putc('h');
if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4)
bs->dFlags |= BFLAG_FASTREAD;
bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK);
serial_putc('i');
}
serial_putc('j');
}
__attribute__((always_inline)) static inline bool
maybe_self_refresh(ADI_BOOT_DATA *bs)
{
serial_putc('a');
if (!CONFIG_MEM_SIZE)
return false;
/* If external memory is enabled, put it into self refresh first. */
#ifdef EBIU_RSTCTL
if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) {
serial_putc('b');
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ);
return true;
}
#else
if (bfin_read_EBIU_SDBCTL() & EBE) {
serial_putc('b');
bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
return true;
}
#endif
serial_putc('c');
return false;
}
__attribute__((always_inline)) static inline u16
program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs)
{
u16 vr_ctl;
serial_putc('a');
vr_ctl = bfin_read_VR_CTL();
serial_putc('b');
/* If we're entering self refresh, make sure it has happened. */
if (put_into_srfs)
#ifdef EBIU_RSTCTL
while (!(bfin_read_EBIU_RSTCTL() & SRACK))
#else
while (!(bfin_read_EBIU_SDSTAT() & SDSRA))
#endif
continue;
serial_putc('c');
/* With newer bootroms, we use the helper function to set up
* the memory controller. Older bootroms lacks such helpers
* so we do it ourselves.
*/
if (!ANOMALY_05000386) {
serial_putc('d');
/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
ADI_SYSCTRL_VALUES memory_settings;
uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT;
if (CONFIG_HAS_VR) {
actions |= SYSCTRL_VRCTL;
if (CONFIG_VR_CTL_VAL & FREQ_MASK)
actions |= SYSCTRL_INTVOLTAGE;
else
actions |= SYSCTRL_EXTVOLTAGE;
memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL;
} else
actions |= SYSCTRL_EXTVOLTAGE;
memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL;
memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL;
memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL;
#if ANOMALY_05000432
bfin_write_SIC_IWR1(0);
#endif
serial_putc('e');
bfrom_SysControl(actions, &memory_settings, NULL);
serial_putc('f');
#if ANOMALY_05000432
bfin_write_SIC_IWR1(-1);
#endif
#if ANOMALY_05000171
bfin_write_SICA_IWR0(-1);
bfin_write_SICA_IWR1(-1);
#endif
serial_putc('g');
} else {
serial_putc('h');
/* Disable all peripheral wakeups except for the PLL event. */
#ifdef SIC_IWR0
bfin_write_SIC_IWR0(1);
bfin_write_SIC_IWR1(0);
# ifdef SIC_IWR2
bfin_write_SIC_IWR2(0);
# endif
#elif defined(SICA_IWR0)
bfin_write_SICA_IWR0(1);
bfin_write_SICA_IWR1(0);
#else
bfin_write_SIC_IWR(1);
#endif
serial_putc('i');
/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
serial_putc('j');
/* Only reprogram when needed to avoid triggering unnecessary
* PLL relock sequences.
*/
if (vr_ctl != CONFIG_VR_CTL_VAL) {
serial_putc('?');
bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
asm("idle;");
serial_putc('!');
}
serial_putc('k');
bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
serial_putc('l');
/* Only reprogram when needed to avoid triggering unnecessary
* PLL relock sequences.
*/
if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
serial_putc('?');
bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
asm("idle;");
serial_putc('!');
}
serial_putc('m');
/* Restore all peripheral wakeups. */
#ifdef SIC_IWR0
bfin_write_SIC_IWR0(-1);
bfin_write_SIC_IWR1(-1);
# ifdef SIC_IWR2
bfin_write_SIC_IWR2(-1);
# endif
#elif defined(SICA_IWR0)
bfin_write_SICA_IWR0(-1);
bfin_write_SICA_IWR1(-1);
#else
bfin_write_SIC_IWR(-1);
#endif
serial_putc('n');
}
serial_putc('o');
return vr_ctl;
}
__attribute__((always_inline)) static inline void
update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB)
{
serial_putc('a');
/* Since we've changed the SCLK above, we may need to update
* the UART divisors (UART baud rates are based on SCLK).
* Do the division by hand as there are no native instructions
* for dividing which means we'd generate a libgcc reference.
*/
if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
serial_putc('b');
unsigned int sdivR, vcoR;
sdivR = bfin_read_PLL_DIV() & 0xf;
vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f;
int dividend = sdivB * divB * vcoR;
int divisor = vcoB * sdivR;
unsigned int quotient;
for (quotient = 0; dividend > 0; ++quotient)
dividend -= divisor;
serial_early_put_div(quotient - ANOMALY_05000230);
serial_putc('c');
}
serial_putc('d');
}
__attribute__((always_inline)) static inline void
program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs)
{
serial_putc('a');
if (!CONFIG_MEM_SIZE)
return;
serial_putc('b');
/* Program the external memory controller before we come out of
* self-refresh. This only works with our SDRAM controller.
*/
#ifndef EBIU_RSTCTL
# ifdef CONFIG_EBIU_SDRRC_VAL
bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL);
# endif
# ifdef CONFIG_EBIU_SDBCTL_VAL
bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL);
# endif
# ifdef CONFIG_EBIU_SDGCTL_VAL
bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL);
# endif
#endif
serial_putc('c');
/* Now that we've reprogrammed, take things out of self refresh. */
if (put_into_srfs)
#ifdef EBIU_RSTCTL
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
#else
bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS));
#endif
serial_putc('d');
/* Our DDR controller sucks and cannot be programmed while in
* self-refresh. So we have to pull it out before programming.
*/
#ifdef EBIU_RSTCTL
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL);
bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL);
bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL);
bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL);
# ifdef CONFIG_EBIU_DDRCTL3_VAL
/* default is disable, so don't need to force this */
bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL);
# endif
# ifdef CONFIG_EBIU_DDRQUE_VAL
bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | CONFIG_EBIU_DDRQUE_VAL);
# endif
#endif
serial_putc('e');
}
__attribute__((always_inline)) static inline void
check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs)
{
serial_putc('a');
if (!CONFIG_MEM_SIZE)
return;
serial_putc('b');
/* Are we coming out of hibernate (suspend to memory) ?
* The memory layout is:
* 0x0: hibernate magic for anomaly 307 (0xDEADBEEF)
* 0x4: return address
* 0x8: stack pointer
*
* SCKELOW is unreliable on older parts (anomaly 307)
*/
if (ANOMALY_05000307 || vr_ctl & 0x8000) {
uint32_t *hibernate_magic = 0;
__builtin_bfin_ssync(); /* make sure memory controller is done */
if (hibernate_magic[0] == 0xDEADBEEF) {
serial_putc('c');
bfin_write_EVT15(hibernate_magic[1]);
bfin_write_IMASK(EVT_IVG15);
__asm__ __volatile__ (
/* load reti early to avoid anomaly 281 */
"reti = %0;"
/* clear hibernate magic */
"[%0] = %1;"
/* load stack pointer */
"SP = [%0 + 8];"
/* lower ourselves from reset ivg to ivg15 */
"raise 15;"
"rti;"
:
: "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */)
);
}
serial_putc('d');
}
serial_putc('e');
}
__attribute__((always_inline)) static inline void
program_async_controller(ADI_BOOT_DATA *bs)
{
serial_putc('a');
/* Program the async banks controller. */
bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL);
bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL);
bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
serial_putc('b');
#ifdef EBIU_MODE
/* Not all parts have these additional MMRs. */
bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL);
bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL);
bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL);
#endif
serial_putc('c');
}
BOOTROM_CALLED_FUNC_ATTR
void initcode(ADI_BOOT_DATA *bs)
{
ADI_BOOT_DATA bootstruct_scratch;
serial_init();
serial_putc('A');
/* If the bootstruct is NULL, then it's because we're loading
* dynamically and not via LDR (bootrom). So set the struct to
* some scratch space.
*/
if (!bs)
bs = &bootstruct_scratch;
serial_putc('B');
bool put_into_srfs = maybe_self_refresh(bs);
serial_putc('C');
uint sdivB, divB, vcoB;
program_early_devices(bs, &sdivB, &divB, &vcoB);
serial_putc('D');
u16 vr_ctl = program_clocks(bs, put_into_srfs);
serial_putc('E');
update_serial_clocks(bs, sdivB, divB, vcoB);
serial_putc('F');
program_memory_controller(bs, put_into_srfs);
serial_putc('G');
check_hibernation(bs, vr_ctl, put_into_srfs);
serial_putc('H');
program_async_controller(bs);
#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
serial_putc('I');
/* tell the bootrom where our entry point is */
if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS)
bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE);
#endif
serial_putc('>');
serial_putc('\n');
serial_deinit();
}
Reference in a new issue View git blame Copy permalink