u-boot/board/freescale/ls1028a
Marek Behún b26334824b board: freescale: various boards: Let env subsystem set gd->env_addr
Various freescale boards set gd->env_addr to default_environment in
board_init(), conditional on CONFIG_ENV_IS_NOWHERE, but this is
redundant, since it is done by env_init() before board_init() is called.

Let the env subsystem handle this.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
..
ddr.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
Kconfig Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
ls1028a.c board: freescale: various boards: Let env subsystem set gd->env_addr 2021-10-31 12:26:44 -06:00
MAINTAINERS board: ls1028a: Update MAINTAINERS 2021-03-05 10:25:42 +05:30
Makefile
README

Overview
--------
The LS1028A Reference Design (RDB) is a high-performance computing,
evaluation, and development platform that supports ARM SoC LS1028A and its
derivatives.

LS1028A SoC Overview
--------------------------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc

RDB Default Switch Settings (1: ON; 0: OFF)
-------------------------------------------
For XSPI NOR boot (default)
SW2: 1111_1000
SW3: 1111_0000
SW5: 0011_1001

For SD Boot
SW2: 1000_1000
SW3: 1111_0000
SW5: 0011_1001

For eMMC Boot
SW2: 1001_1000
SW3: 1111_0000
SW5: 0011_1001

LS1028ARDB board Overview
-------------------------
Processor
 Two Arm Cortex- A72 processor cores:
  - Based on 64-bit ARMv8 architecture
  - Up to 1.3 GHz operation
  - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1
    data cache
  - Arranged as a single cluster of two cores sharing a single 1 MB L2
    cache
DDR memory
  - Five onboard 1G x8 discrete memory modules (Four data byte lanes
    ECC)
  - 32-bit data and 4-bit ECC
  - One chip select
  - Data transfer rates of up to 1.6 GT/s
  - Single-bit error correction and double-bit error detection ECC (4-bit
    check word across 32-bit data)
High-speed serial ports(SerDes)
 - Lane 0: Supports one 1 GbE RJ45 SGMII, connected through the
   Qualcomm AR8033 PHY
 - Lane 1: Supports four 1.25 GbE RJ45 QSGMII, each connected
   through the NXP F104S8A PHY
 - Lane 2: Connects to one PCIe M.2 Key-E slot to support PCIe Gen3
   (8 Gbit/s) cards
 - Lane 3: Connects to one PCIe M.2 Key-E slot or one SATA M.2 Key-B
   slot through a register mux to support either PCIe Gen 3 (8 Gbit/s) or
   SATA Gen 3 cards (6 Gbit/s) at a time
eSDHC
 - eSDHC1, eSDHC2
SPI
 - Connects to two mikroBUS sockets to support mikro-click modules,
   such as Bluetooth 4.0, 2.4 GHz IEEE 802.15.4 radio transceiver, near
   field communications (NFC) controller
Octal SPI (XSPI)
 - One 256 MB onboard XSPI serial NOR flash memory
 - One 512 MB onboard XSPI serial NAND flash memory
 - Supports a QSPI emulator for offboard QSPI emulation
I2C
 - All system devices are accessed via I2C1, which is multiplexed on
   I2C multiplexer PCA9848 to isolate address conflicts and reduce
   capacitive load
 - I2C1 is used for EEPROMs, RTC, INA220 current-power sensor,
   thermal monitor, PCIe/SATA M.2 connectors and mikro-click modules
   1 and 2
CAN
 - The two CAN DB9 ports can support CAN FD fast phase at data rates of
   up to 5 Mbit/s
Serial audio interface(SAI)
 - Audio codec SGTL5000 provides headphone and audio LINEOUT for
   stereo speakers
 - IEEE1588 interface to support audio on SAI4

QDS Default Switch Settings (1: ON; 0: OFF)
-------------------------------------------
For SD Boot
SW1 : 1000_0000
SW2 : 1110_0110
SW3 : 0000_0010
SW4 : 0000_0000
SW5 : 0000_0000
SW6 : 0000_0000
SW7 : 1111_0011
SW8 : 1110_0000
SW9 : 1000_0001
SW10: 1110_0000

For XSPI Boot
SW1 : 1111_0000
SW2 : 0000_0110
SW3 : 0000_0010
SW4 : 0000_0000
SW5 : 0110_0000
SW6 : 0101_0000
SW7 : 1111_0011
SW8 : 1110_0000
SW9 : 1000_0000
SW10: 1110_0000

LS1028AQDS board Overview
-------------------------
Processor
 Two Arm Cortex- A72 processor cores:
  - Based on 64-bit ARMv8 architecture
  - Up to 1.3 GHz operation
  - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1
    data cache
  - Arranged as a single cluster of two cores sharing a single 1 MB L2
    cache
DDR memory
 - Supports data rates of up to 1.6 GT/s for both, DDR4 and DDR3L
 - Supports a single- or dual-ranked SODIMM or UDIMM connector
 - 32-bit data and 4-bit ECC
 - Supports x8/x16 devices
 - Supports ECC error detection and correction
 - 1.35 V or 1.2 V DDR power supply, with automatic tracking of VTT, to
   all devices in case of DDR3L or DDR4, respectively. Power can
   switch to 1.35 V or 1.2 V, based on the switch settings for DDR3L or
   DDR4 devices, respectively
SerDes (Serializer/Deserializer)
 - Four-lane (0-3) SerDes:
 - Lane 0: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 10
   Gbit SXGMII, 1 Gbit SGMII
 - Lane 1: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
   SGMII, 10 Gbit QXGMII, 5 Gbit QSGMII, 1 Gbit SGMII
 - Lane 2: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
   SGMII
 - Lane 3: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
   SGMII, SATA 2.0/3.0
 - Four slots on SerDes lanes support PCIe Gen1/2/3, 1 Gbit SGMII
   add-in cards
 - Lane 1 connects to a 2x10 connector with SFP+ through a retimer;
   lane 2 (TX lines) connects to an SMA connector
   Lane 3 connects to 1x7 header to support SATA devices
eSDHC
 - eSDHC1, eSDHC2
SPI
 - SPI1 and SPI2 support three onboard SPI flash memory devices:
    512 Mbit high-speed flash (with speed of up to 108/54 MHz)
    memory for storage
    4 Mbit low-speed flash memory (with speed of up to 40 MHz)
    64 Mbit high-speed flash memory (with speed of up to 104/80
    MHz)
 - SPI3 supports one onboard 64 Mbit SPI flash memory (with speed of
   up to 104/80 MHz)
 - All memories operate at 1.8 V
 - A header is provided on SPI1 to test SPI slave mode
I2C
 - LS1028A supports eight I2C controllers
Serial audio interface(SAI)
 Two SAI ports with audio codec SGTL5000:
  - Include stereo LINEIN with support for external analog input
  - Provide headphone and line output
Display
 - DisplayPort connector to connect the DP data to a 4K display device
   (computer monitor)
 - eDP connector to connect the DP data to a 4K display panel