mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
db363dbce7
Make ddr3_calc_mem_cs_size() global scope and use it in ddr3_new_tip_ecc_scrub to correctly initialize all of DDR memory. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
236 lines
7.9 KiB
C
236 lines
7.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*/
|
|
|
|
#ifndef _MV_DDR_PLAT_H
|
|
#define _MV_DDR_PLAT_H
|
|
|
|
#define MAX_INTERFACE_NUM 1
|
|
#define MAX_BUS_NUM 5
|
|
#define DDR_IF_CTRL_SUBPHYS_NUM 3
|
|
|
|
#define DFS_LOW_FREQ_VALUE 120
|
|
#define SDRAM_CS_SIZE 0xfffffff /* FIXME: implement a function for cs size for each platform */
|
|
|
|
#define INTER_REGS_BASE SOC_REGS_PHY_BASE
|
|
#define AP_INT_REG_START_ADDR 0xd0000000
|
|
#define AP_INT_REG_END_ADDR 0xd0100000
|
|
|
|
/* Controler bus divider 1 for 32 bit, 2 for 64 bit */
|
|
#define DDR_CONTROLLER_BUS_WIDTH_MULTIPLIER 1
|
|
|
|
/* Tune internal training params values */
|
|
#define TUNE_TRAINING_PARAMS_CK_DELAY 160
|
|
#define TUNE_TRAINING_PARAMS_PHYREG3VAL 0xA
|
|
#define TUNE_TRAINING_PARAMS_PRI_DATA 123
|
|
#define TUNE_TRAINING_PARAMS_NRI_DATA 123
|
|
#define TUNE_TRAINING_PARAMS_PRI_CTRL 74
|
|
#define TUNE_TRAINING_PARAMS_NRI_CTRL 74
|
|
#define TUNE_TRAINING_PARAMS_P_ODT_DATA 45
|
|
#define TUNE_TRAINING_PARAMS_N_ODT_DATA 45
|
|
#define TUNE_TRAINING_PARAMS_P_ODT_CTRL 45
|
|
#define TUNE_TRAINING_PARAMS_N_ODT_CTRL 45
|
|
#define TUNE_TRAINING_PARAMS_DIC 0x2
|
|
#define TUNE_TRAINING_PARAMS_ODT_CONFIG_2CS 0x120012
|
|
#define TUNE_TRAINING_PARAMS_ODT_CONFIG_1CS 0x10000
|
|
#define TUNE_TRAINING_PARAMS_RTT_NOM 0x44
|
|
|
|
#define TUNE_TRAINING_PARAMS_RTT_WR_1CS 0x0 /*off*/
|
|
#define TUNE_TRAINING_PARAMS_RTT_WR_2CS 0x0 /*off*/
|
|
|
|
#define MARVELL_BOARD MARVELL_BOARD_ID_BASE
|
|
|
|
|
|
#define REG_DEVICE_SAR1_ADDR 0xe4204
|
|
#define RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET 17
|
|
#define RST2_CPU_DDR_CLOCK_SELECT_IN_MASK 0x1f
|
|
#define DEVICE_SAMPLE_AT_RESET2_REG 0x18604
|
|
|
|
#define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_OFFSET 0
|
|
#define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_25MHZ 0
|
|
#define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_40MHZ 1
|
|
|
|
/* DRAM Windows */
|
|
#define REG_XBAR_WIN_5_CTRL_ADDR 0x20050
|
|
#define REG_XBAR_WIN_5_BASE_ADDR 0x20054
|
|
|
|
/* DRAM Windows */
|
|
#define REG_XBAR_WIN_4_CTRL_ADDR 0x20040
|
|
#define REG_XBAR_WIN_4_BASE_ADDR 0x20044
|
|
#define REG_XBAR_WIN_4_REMAP_ADDR 0x20048
|
|
#define REG_XBAR_WIN_7_REMAP_ADDR 0x20078
|
|
#define REG_XBAR_WIN_16_CTRL_ADDR 0x200d0
|
|
#define REG_XBAR_WIN_16_BASE_ADDR 0x200d4
|
|
#define REG_XBAR_WIN_16_REMAP_ADDR 0x200dc
|
|
#define REG_XBAR_WIN_19_CTRL_ADDR 0x200e8
|
|
|
|
#define REG_FASTPATH_WIN_BASE_ADDR(win) (0x20180 + (0x8 * win))
|
|
#define REG_FASTPATH_WIN_CTRL_ADDR(win) (0x20184 + (0x8 * win))
|
|
|
|
#define CPU_CONFIGURATION_REG(id) (0x21800 + (id * 0x100))
|
|
#define CPU_MRVL_ID_OFFSET 0x10
|
|
#define SAR1_CPU_CORE_MASK 0x00000018
|
|
#define SAR1_CPU_CORE_OFFSET 3
|
|
|
|
/* SatR defined too change topology busWidth and ECC configuration */
|
|
#define DDR_SATR_CONFIG_MASK_WIDTH 0x8
|
|
#define DDR_SATR_CONFIG_MASK_ECC 0x10
|
|
#define DDR_SATR_CONFIG_MASK_ECC_PUP 0x20
|
|
|
|
#define REG_SAMPLE_RESET_HIGH_ADDR 0x18600
|
|
|
|
#define MV_BOARD_REFCLK_25MHZ 25000000
|
|
#define MV_BOARD_REFCLK MV_BOARD_REFCLK_25MHZ
|
|
|
|
#define MAX_DQ_NUM 40
|
|
|
|
/* dram line buffer registers */
|
|
#define DLB_CTRL_REG 0x1700
|
|
#define DLB_EN_OFFS 0
|
|
#define DLB_EN_MASK 0x1
|
|
#define DLB_EN_ENA 1
|
|
#define DLB_EN_DIS 0
|
|
#define WR_COALESCE_EN_OFFS 2
|
|
#define WR_COALESCE_EN_MASK 0x1
|
|
#define WR_COALESCE_EN_ENA 1
|
|
#define WR_COALESCE_EN_DIS 0
|
|
#define AXI_PREFETCH_EN_OFFS 3
|
|
#define AXI_PREFETCH_EN_MASK 0x1
|
|
#define AXI_PREFETCH_EN_ENA 1
|
|
#define AXI_PREFETCH_EN_DIS 0
|
|
#define MBUS_PREFETCH_EN_OFFS 4
|
|
#define MBUS_PREFETCH_EN_MASK 0x1
|
|
#define MBUS_PREFETCH_EN_ENA 1
|
|
#define MBUS_PREFETCH_EN_DIS 0
|
|
#define PREFETCH_NXT_LN_SZ_TRIG_OFFS 6
|
|
#define PREFETCH_NXT_LN_SZ_TRIG_MASK 0x1
|
|
#define PREFETCH_NXT_LN_SZ_TRIG_ENA 1
|
|
#define PREFETCH_NXT_LN_SZ_TRIG_DIS 0
|
|
|
|
#define DLB_BUS_OPT_WT_REG 0x1704
|
|
#define DLB_AGING_REG 0x1708
|
|
#define DLB_EVICTION_CTRL_REG 0x170c
|
|
#define DLB_EVICTION_TIMERS_REG 0x1710
|
|
#define DLB_USER_CMD_REG 0x1714
|
|
#define DLB_WTS_DIFF_CS_REG 0x1770
|
|
#define DLB_WTS_DIFF_BG_REG 0x1774
|
|
#define DLB_WTS_SAME_BG_REG 0x1778
|
|
#define DLB_WTS_CMDS_REG 0x177c
|
|
#define DLB_WTS_ATTR_PRIO_REG 0x1780
|
|
#define DLB_QUEUE_MAP_REG 0x1784
|
|
#define DLB_SPLIT_REG 0x1788
|
|
|
|
/* Subphy result control per byte registers */
|
|
#define RESULT_CONTROL_BYTE_PUP_0_REG 0x1830
|
|
#define RESULT_CONTROL_BYTE_PUP_1_REG 0x1834
|
|
#define RESULT_CONTROL_BYTE_PUP_2_REG 0x1838
|
|
#define RESULT_CONTROL_BYTE_PUP_3_REG 0x183c
|
|
#define RESULT_CONTROL_BYTE_PUP_4_REG 0x18b0
|
|
|
|
/* Subphy result control per bit registers */
|
|
#define RESULT_CONTROL_PUP_0_BIT_0_REG 0x18b4
|
|
#define RESULT_CONTROL_PUP_0_BIT_1_REG 0x18b8
|
|
#define RESULT_CONTROL_PUP_0_BIT_2_REG 0x18bc
|
|
#define RESULT_CONTROL_PUP_0_BIT_3_REG 0x18c0
|
|
#define RESULT_CONTROL_PUP_0_BIT_4_REG 0x18c4
|
|
#define RESULT_CONTROL_PUP_0_BIT_5_REG 0x18c8
|
|
#define RESULT_CONTROL_PUP_0_BIT_6_REG 0x18cc
|
|
#define RESULT_CONTROL_PUP_0_BIT_7_REG 0x18f0
|
|
|
|
#define RESULT_CONTROL_PUP_1_BIT_0_REG 0x18f4
|
|
#define RESULT_CONTROL_PUP_1_BIT_1_REG 0x18f8
|
|
#define RESULT_CONTROL_PUP_1_BIT_2_REG 0x18fc
|
|
#define RESULT_CONTROL_PUP_1_BIT_3_REG 0x1930
|
|
#define RESULT_CONTROL_PUP_1_BIT_4_REG 0x1934
|
|
#define RESULT_CONTROL_PUP_1_BIT_5_REG 0x1938
|
|
#define RESULT_CONTROL_PUP_1_BIT_6_REG 0x193c
|
|
#define RESULT_CONTROL_PUP_1_BIT_7_REG 0x19b0
|
|
|
|
#define RESULT_CONTROL_PUP_2_BIT_0_REG 0x19b4
|
|
#define RESULT_CONTROL_PUP_2_BIT_1_REG 0x19b8
|
|
#define RESULT_CONTROL_PUP_2_BIT_2_REG 0x19bc
|
|
#define RESULT_CONTROL_PUP_2_BIT_3_REG 0x19c0
|
|
#define RESULT_CONTROL_PUP_2_BIT_4_REG 0x19c4
|
|
#define RESULT_CONTROL_PUP_2_BIT_5_REG 0x19c8
|
|
#define RESULT_CONTROL_PUP_2_BIT_6_REG 0x19cc
|
|
#define RESULT_CONTROL_PUP_2_BIT_7_REG 0x19f0
|
|
|
|
#define RESULT_CONTROL_PUP_3_BIT_0_REG 0x19f4
|
|
#define RESULT_CONTROL_PUP_3_BIT_1_REG 0x19f8
|
|
#define RESULT_CONTROL_PUP_3_BIT_2_REG 0x19fc
|
|
#define RESULT_CONTROL_PUP_3_BIT_3_REG 0x1a30
|
|
#define RESULT_CONTROL_PUP_3_BIT_4_REG 0x1a34
|
|
#define RESULT_CONTROL_PUP_3_BIT_5_REG 0x1a38
|
|
#define RESULT_CONTROL_PUP_3_BIT_6_REG 0x1a3c
|
|
#define RESULT_CONTROL_PUP_3_BIT_7_REG 0x1ab0
|
|
|
|
#define RESULT_CONTROL_PUP_4_BIT_0_REG 0x1ab4
|
|
#define RESULT_CONTROL_PUP_4_BIT_1_REG 0x1ab8
|
|
#define RESULT_CONTROL_PUP_4_BIT_2_REG 0x1abc
|
|
#define RESULT_CONTROL_PUP_4_BIT_3_REG 0x1ac0
|
|
#define RESULT_CONTROL_PUP_4_BIT_4_REG 0x1ac4
|
|
#define RESULT_CONTROL_PUP_4_BIT_5_REG 0x1ac8
|
|
#define RESULT_CONTROL_PUP_4_BIT_6_REG 0x1acc
|
|
#define RESULT_CONTROL_PUP_4_BIT_7_REG 0x1af0
|
|
|
|
/* CPU */
|
|
#define REG_BOOTROM_ROUTINE_ADDR 0x182d0
|
|
#define REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS 12
|
|
|
|
/* Matrix enables DRAM modes (bus width/ECC) per boardId */
|
|
#define TOPOLOGY_UPDATE_32BIT 0
|
|
#define TOPOLOGY_UPDATE_32BIT_ECC 1
|
|
#define TOPOLOGY_UPDATE_16BIT 2
|
|
#define TOPOLOGY_UPDATE_16BIT_ECC 3
|
|
#define TOPOLOGY_UPDATE_16BIT_ECC_PUP3 4
|
|
#define TOPOLOGY_UPDATE { \
|
|
/* 32Bit, 32bit ECC, 16bit, 16bit ECC PUP4, 16bit ECC PUP3 */ \
|
|
{1, 1, 1, 1, 1}, /* RD_NAS_68XX_ID */ \
|
|
{1, 1, 1, 1, 1}, /* DB_68XX_ID */ \
|
|
{1, 0, 1, 0, 1}, /* RD_AP_68XX_ID */ \
|
|
{1, 0, 1, 0, 1}, /* DB_AP_68XX_ID */ \
|
|
{1, 0, 1, 0, 1}, /* DB_GP_68XX_ID */ \
|
|
{0, 0, 1, 1, 0}, /* DB_BP_6821_ID */ \
|
|
{1, 1, 1, 1, 1} /* DB_AMC_6820_ID */ \
|
|
};
|
|
|
|
enum {
|
|
CPU_1066MHZ_DDR_400MHZ,
|
|
CPU_RESERVED_DDR_RESERVED0,
|
|
CPU_667MHZ_DDR_667MHZ,
|
|
CPU_800MHZ_DDR_800MHZ,
|
|
CPU_RESERVED_DDR_RESERVED1,
|
|
CPU_RESERVED_DDR_RESERVED2,
|
|
CPU_RESERVED_DDR_RESERVED3,
|
|
LAST_FREQ
|
|
};
|
|
|
|
/* struct used for DLB configuration array */
|
|
struct dlb_config {
|
|
u32 reg_addr;
|
|
u32 reg_data;
|
|
};
|
|
|
|
#define ACTIVE_INTERFACE_MASK 0x1
|
|
|
|
extern u32 dmin_phy_reg_table[][2];
|
|
extern u16 odt_slope[];
|
|
extern u16 odt_intercept[];
|
|
|
|
int mv_ddr_pre_training_soc_config(const char *ddr_type);
|
|
int mv_ddr_post_training_soc_config(const char *ddr_type);
|
|
void mv_ddr_mem_scrubbing(void);
|
|
|
|
void mv_ddr_odpg_enable(void);
|
|
void mv_ddr_odpg_disable(void);
|
|
void mv_ddr_odpg_done_clr(void);
|
|
int mv_ddr_is_odpg_done(u32 count);
|
|
void mv_ddr_training_enable(void);
|
|
int mv_ddr_is_training_done(u32 count, u32 *result);
|
|
u32 mv_ddr_dm_pad_get(void);
|
|
int mv_ddr_pre_training_fixup(void);
|
|
int mv_ddr_post_training_fixup(void);
|
|
int mv_ddr_manual_cal_do(void);
|
|
int ddr3_calc_mem_cs_size(u32 cs, uint64_t *cs_size);
|
|
#endif /* _MV_DDR_PLAT_H */
|