mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
144 lines
3.8 KiB
C
144 lines
3.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2007, 2012 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <MCD_dma.h>
|
|
#include <asm/immap.h>
|
|
#include <asm/io.h>
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
#include <config.h>
|
|
#include <net.h>
|
|
#include <asm/fsl_mcdmafec.h>
|
|
#endif
|
|
|
|
/*
|
|
* Breath some life into the CPU...
|
|
*
|
|
* Set up the memory map,
|
|
* initialize a bunch of registers,
|
|
* initialize the UPM's
|
|
*/
|
|
void cpu_init_f(void)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
|
|
xlbarb_t *xlbarb = (xlbarb_t *) MMAP_XARB;
|
|
|
|
out_be32(&xlbarb->adrto, 0x2000);
|
|
out_be32(&xlbarb->datto, 0x2500);
|
|
out_be32(&xlbarb->busto, 0x3000);
|
|
|
|
out_be32(&xlbarb->cfg, XARB_CFG_AT | XARB_CFG_DT);
|
|
|
|
/* Master Priority Enable */
|
|
out_be32(&xlbarb->prien, 0xff);
|
|
out_be32(&xlbarb->pri, 0);
|
|
|
|
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
|
|
out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
|
|
out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
|
|
out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
|
|
out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
|
|
out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
|
|
out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
|
|
out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
|
|
out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
|
|
out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
|
|
out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
|
|
out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
|
|
out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
|
|
out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
|
|
out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
|
|
out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
|
|
out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
|
|
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
|
|
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_FSL
|
|
out_be16(&gpio->par_feci2cirq,
|
|
GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA);
|
|
#endif
|
|
|
|
icache_enable();
|
|
}
|
|
|
|
/*
|
|
* initialize higher level parts of CPU like timers
|
|
*/
|
|
int cpu_init_r(void)
|
|
{
|
|
#if defined(CONFIG_CMD_NET) && defined(CONFIG_FSLDMAFEC)
|
|
MCD_initDma((dmaRegs *) (MMAP_MCDMA), (void *)(MMAP_SRAM + 512),
|
|
MCD_RELOC_TASKS);
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
void uart_port_conf(int port)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40);
|
|
|
|
/* Setup Ports: */
|
|
switch (port) {
|
|
case 0:
|
|
out_8(&gpio->par_psc0, GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0);
|
|
break;
|
|
case 1:
|
|
out_8(&gpio->par_psc1, GPIO_PAR_PSC1_TXD1 | GPIO_PAR_PSC1_RXD1);
|
|
break;
|
|
case 2:
|
|
out_8(&gpio->par_psc2, GPIO_PAR_PSC2_TXD2 | GPIO_PAR_PSC2_RXD2);
|
|
break;
|
|
case 3:
|
|
out_8(&gpio->par_psc3, GPIO_PAR_PSC3_TXD3 | GPIO_PAR_PSC3_RXD3);
|
|
break;
|
|
}
|
|
|
|
clrbits_8(pscsicr, 0x07);
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
int fecpin_setclear(struct eth_device *dev, int setclear)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
|
|
|
|
if (setclear) {
|
|
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
|
|
setbits_be16(&gpio->par_feci2cirq, 0xf000);
|
|
else
|
|
setbits_be16(&gpio->par_feci2cirq, 0x0fc0);
|
|
} else {
|
|
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
|
|
clrbits_be16(&gpio->par_feci2cirq, 0xf000);
|
|
else
|
|
clrbits_be16(&gpio->par_feci2cirq, 0x0fc0);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|