u-boot/arch/arm/dts/fsl-ls1028a-rdb.dts
Kuldeep Singh 3ec7900b23 arm: dts: ls1028a: Use flexspi in octal I/O mode
Configure RX and TX bus-width values to use flexspi in octal I/O mode.
If bus-widths are not specified, then single I/O mode is set by default.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30

139 lines
1.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP ls1028ARDB device tree source
*
* Copyright 2019 NXP
*
*/
/dts-v1/;
#include "fsl-ls1028a.dtsi"
/ {
model = "NXP Layerscape 1028a RDB Board";
compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
aliases {
spi0 = &fspi;
};
};
&dspi0 {
status = "okay";
};
&dspi1 {
status = "okay";
};
&dspi2 {
status = "okay";
};
&esdhc0 {
status = "okay";
};
&esdhc1 {
status = "okay";
mmc-hs200-1_8v;
};
&fspi {
status = "okay";
mt35xu02g0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <1>;
};
};
&i2c0 {
status = "okay";
u-boot,dm-pre-reloc;
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
rtc@51 {
compatible = "pcf2127-rtc";
reg = <0x51>;
};
};
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
};
&sata {
status = "okay";
};
&serial0 {
status = "okay";
};
&serial1 {
status = "okay";
};
&usb1 {
status = "okay";
};
&usb2 {
status = "okay";
};
&enetc0 {
status = "okay";
phy-mode = "sgmii";
phy-handle = <&rdb_phy0>;
};
&mdio0 {
status = "okay";
rdb_phy0: phy@2 {
reg = <2>;
};
};