u-boot/arch/x86/lib/spl.c
Simon Glass daade119aa x86: spl: Reduce priority of the basic SPL image loader
This image loader works on systems where the flash is directly mapped to
the last part of the 32-bit address space. On recent Intel systems (such
as apollolake) this is not the case.

Reduce the priority of this loader so that another one can override it.

While we are here, rename the loader to BOOT_DEVICE_SPI_MMAP since
BOOT_DEVICE_BOARD is not very descriptive.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:35 +08:00

196 lines
4 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2016 Google, Inc
*/
#include <common.h>
#include <debug_uart.h>
#include <malloc.h>
#include <spl.h>
#include <asm/cpu.h>
#include <asm/mrccache.h>
#include <asm/mtrr.h>
#include <asm/processor.h>
#include <asm/spl.h>
#include <asm-generic/sections.h>
DECLARE_GLOBAL_DATA_PTR;
__weak int arch_cpu_init_dm(void)
{
return 0;
}
static int x86_spl_init(void)
{
#ifndef CONFIG_TPL
/*
* TODO(sjg@chromium.org): We use this area of RAM for the stack
* and global_data in SPL. Once U-Boot starts up and releocates it
* is not needed. We could make this a CONFIG option or perhaps
* place it immediately below CONFIG_SYS_TEXT_BASE.
*/
char *ptr = (char *)0x110000;
#endif
int ret;
debug("%s starting\n", __func__);
ret = spl_init();
if (ret) {
debug("%s: spl_init() failed\n", __func__);
return ret;
}
#ifdef CONFIG_TPL
/* Do a mini-init if TPL has already done the full init */
ret = x86_cpu_reinit_f();
#else
ret = arch_cpu_init();
#endif
if (ret) {
debug("%s: arch_cpu_init() failed\n", __func__);
return ret;
}
#ifndef CONFIG_TPL
ret = arch_cpu_init_dm();
if (ret) {
debug("%s: arch_cpu_init_dm() failed\n", __func__);
return ret;
}
#endif
preloader_console_init();
#ifndef CONFIG_TPL
ret = print_cpuinfo();
if (ret) {
debug("%s: print_cpuinfo() failed\n", __func__);
return ret;
}
#endif
ret = dram_init();
if (ret) {
debug("%s: dram_init() failed\n", __func__);
return ret;
}
if (IS_ENABLED(CONFIG_ENABLE_MRC_CACHE)) {
ret = mrccache_spl_save();
if (ret)
debug("%s: Failed to write to mrccache (err=%d)\n",
__func__, ret);
}
#ifndef CONFIG_TPL
memset(&__bss_start, 0, (ulong)&__bss_end - (ulong)&__bss_start);
/* TODO(sjg@chromium.org): Consider calling cpu_init_r() here */
ret = interrupt_init();
if (ret) {
debug("%s: interrupt_init() failed\n", __func__);
return ret;
}
/*
* The stack grows down from ptr. Put the global data at ptr. This
* will only be used for SPL. Once SPL loads U-Boot proper it will
* set up its own stack.
*/
gd->new_gd = (struct global_data *)ptr;
memcpy(gd->new_gd, gd, sizeof(*gd));
arch_setup_gd(gd->new_gd);
gd->start_addr_sp = (ulong)ptr;
/* Cache the SPI flash. Otherwise copying the code to RAM takes ages */
ret = mtrr_add_request(MTRR_TYPE_WRBACK,
(1ULL << 32) - CONFIG_XIP_ROM_SIZE,
CONFIG_XIP_ROM_SIZE);
if (ret) {
debug("%s: SPI cache setup failed (err=%d)\n", __func__, ret);
return ret;
}
mtrr_commit(true);
#endif
return 0;
}
void board_init_f(ulong flags)
{
int ret;
ret = x86_spl_init();
if (ret) {
debug("Error %d\n", ret);
hang();
}
#ifdef CONFIG_TPL
gd->bd = malloc(sizeof(*gd->bd));
if (!gd->bd) {
printf("Out of memory for bd_info size %x\n", sizeof(*gd->bd));
hang();
}
board_init_r(gd, 0);
#else
/* Uninit CAR and jump to board_init_f_r() */
board_init_f_r_trampoline(gd->start_addr_sp);
#endif
}
void board_init_f_r(void)
{
init_cache_f_r();
gd->flags &= ~GD_FLG_SERIAL_READY;
debug("cache status %d\n", dcache_status());
board_init_r(gd, 0);
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_SPI_MMAP;
}
int spl_start_uboot(void)
{
return 0;
}
void spl_board_announce_boot_device(void)
{
printf("SPI flash");
}
static int spl_board_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
spl_image->size = CONFIG_SYS_MONITOR_LEN;
spl_image->entry_point = CONFIG_SYS_TEXT_BASE;
spl_image->load_addr = CONFIG_SYS_TEXT_BASE;
spl_image->os = IH_OS_U_BOOT;
spl_image->name = "U-Boot";
debug("Loading to %lx\n", spl_image->load_addr);
return 0;
}
SPL_LOAD_IMAGE_METHOD("SPI", 5, BOOT_DEVICE_SPI_MMAP, spl_board_load_image);
int spl_spi_load_image(void)
{
return -EPERM;
}
#ifdef CONFIG_X86_RUN_64BIT
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
int ret;
printf("Jumping to 64-bit U-Boot: Note many features are missing\n");
ret = cpu_jump_to_64bit_uboot(spl_image->entry_point);
debug("ret=%d\n", ret);
hang();
}
#endif
void spl_board_init(void)
{
#ifndef CONFIG_TPL
preloader_console_init();
#endif
}