u-boot/arch/mips/mach-mtmips/mt7621/spl/spl.c
Weijie Gao 4bc0104c97 mips: mtmips: add support for MediaTek MT7621 SoC
This patch adds support for MediaTek MT7621 SoC.
All files are dedicated for u-boot.

The default build target is u-boot-mt7621.bin.

The specification of this chip:
https://www.mediatek.com/products/homenetworking/mt7621

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-07-13 23:03:37 +02:00

96 lines
1.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2022 MediaTek Inc. All rights reserved.
*
* Author: Weijie Gao <weijie.gao@mediatek.com>
*/
#include <init.h>
#include <image.h>
#include <vsprintf.h>
#include <malloc.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/addrspace.h>
#include <asm/byteorder.h>
#include <asm/global_data.h>
#include <linux/sizes.h>
#include <linux/types.h>
#include <mach/serial.h>
#include "../mt7621.h"
#include "dram.h"
#include <spl.h>
DECLARE_GLOBAL_DATA_PTR;
struct tpl_info {
u32 magic;
u32 size;
};
void set_timer_freq_simple(void)
{
u32 div = get_xtal_mhz();
/* Round down cpu freq */
gd->arch.timer_freq = rounddown(CONFIG_MT7621_CPU_FREQ, div) * 500000;
}
void __noreturn board_init_f(ulong dummy)
{
spl_init();
#ifdef CONFIG_SPL_SERIAL
/*
* mtmips_spl_serial_init() is useful if debug uart is enabled,
* or DM based serial is not enabled.
*/
mtmips_spl_serial_init();
preloader_console_init();
#endif
board_init_r(NULL, 0);
}
void board_boot_order(u32 *spl_boot_list)
{
#ifdef CONFIG_MT7621_BOOT_FROM_NAND
spl_boot_list[0] = BOOT_DEVICE_NAND;
#else
spl_boot_list[0] = BOOT_DEVICE_NOR;
#endif
}
unsigned long spl_nor_get_uboot_base(void)
{
const struct tpl_info *tpli;
const image_header_t *hdr;
u32 addr;
addr = FLASH_MMAP_BASE + TPL_INFO_OFFSET;
tpli = (const struct tpl_info *)KSEG1ADDR(addr);
if (tpli->magic == TPL_INFO_MAGIC) {
addr = FLASH_MMAP_BASE + tpli->size;
hdr = (const image_header_t *)KSEG1ADDR(addr);
if (image_get_magic(hdr) == IH_MAGIC) {
addr += sizeof(*hdr) + image_get_size(hdr);
return KSEG1ADDR(addr);
}
}
panic("Unable to locate SPL payload\n");
return 0;
}
uint32_t spl_nand_get_uboot_raw_page(void)
{
const struct stage_header *sh = (const struct stage_header *)&_start;
u32 addr;
addr = image_get_header_size() + be32_to_cpu(sh->stage_size);
addr = ALIGN(addr, SZ_4K);
return addr;
}