u-boot/arch/arm/mach-keystone
Lokesh Vutla e2924e5904 ARM: k2g: Configure reset mux to device reset
BOOTCFG_RSTMUX8 register controls the reset mux associated with the ARM.
Timer5(dedicated to ARM) when used as WatchDog timer, the events it
generates are routed to the above mux.

Following are the 3 events that can controlled bt the reset mux:
- Device Reset
- An interrupt to the ARM_GIC
- An interrupt to the ARM_GIC followed by a device reset.

Right now to give a default watchdog behaviour "Device reset" is
being selected.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
2016-06-02 21:42:19 -04:00
..
include/mach ARM: k2g: Configure reset mux to device reset 2016-06-02 21:42:19 -04:00
clock.c ARM: keystone2: K2G: Add support for different arm/device speeds 2016-03-14 19:18:44 -04:00
cmd_clock.c ARM: keystone2: Use common definition for clk_get_rate 2015-08-12 20:47:55 -04:00
cmd_ddr3.c ARM: keystone: move SoC sources to mach-keystone 2015-02-21 08:23:52 -05:00
cmd_mon.c ARM: keystone2: Split monitor code / command code 2016-03-16 15:03:15 -04:00
cmd_poweroff.c ARM: keystone2: Switch to using the poweroff command 2016-03-16 15:03:32 -04:00
config.mk ARM: keystone2: Use dtb images by default 2015-10-22 14:22:11 -04:00
ddr3.c ARM: k2g: Add ddr3 info 2015-10-22 14:22:18 -04:00
ddr3_spd.c ARM: keystone2: use detected ddr3a size 2016-03-14 19:18:45 -04:00
init.c ARM: keystone2: Add missing privilege ID settings 2016-04-01 17:17:40 -04:00
Kconfig ARM: k2g: Add kconfig support 2015-10-22 14:22:13 -04:00
keystone.c ARM: keystone2: Switch to using the poweroff command 2016-03-16 15:03:32 -04:00
Makefile ARM: keystone2: Only link cmd_ddr3.o on non-SPL builds 2016-03-16 15:03:34 -04:00
mon.c ARM: keystone2: Split monitor code / command code 2016-03-16 15:03:15 -04:00
msmc.c ARM: keystone: move SoC sources to mach-keystone 2015-02-21 08:23:52 -05:00
psc.c ARM: keystone2: psc: introduce function to hold and release module in reset. 2016-03-14 19:18:36 -04:00