mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
488 lines
9.1 KiB
ArmAsm
488 lines
9.1 KiB
ArmAsm
/*
|
|
* Most of this taken from Redboot hal_platform_setup.h with cleanup
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
|
|
|
|
/* wait for coprocessor write complete */
|
|
.macro CPWAIT reg
|
|
mrc p15,0,\reg,c2,c0,0
|
|
mov \reg,\reg
|
|
sub pc,pc,#4
|
|
.endm
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
|
|
mov r10, lr
|
|
|
|
/* Set up GPIO pins first */
|
|
|
|
ldr r0, =GPSR0
|
|
ldr r1, =CONFIG_SYS_GPSR0_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPSR1
|
|
ldr r1, =CONFIG_SYS_GPSR1_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPSR2
|
|
ldr r1, =CONFIG_SYS_GPSR2_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPCR0
|
|
ldr r1, =CONFIG_SYS_GPCR0_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPCR1
|
|
ldr r1, =CONFIG_SYS_GPCR1_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPCR2
|
|
ldr r1, =CONFIG_SYS_GPCR2_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GRER0
|
|
ldr r1, =CONFIG_SYS_GRER0_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GRER1
|
|
ldr r1, =CONFIG_SYS_GRER1_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GRER2
|
|
ldr r1, =CONFIG_SYS_GRER2_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GFER0
|
|
ldr r1, =CONFIG_SYS_GFER0_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GFER1
|
|
ldr r1, =CONFIG_SYS_GFER1_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GFER2
|
|
ldr r1, =CONFIG_SYS_GFER2_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPDR0
|
|
ldr r1, =CONFIG_SYS_GPDR0_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPDR1
|
|
ldr r1, =CONFIG_SYS_GPDR1_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPDR2
|
|
ldr r1, =CONFIG_SYS_GPDR2_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GAFR0_L
|
|
ldr r1, =CONFIG_SYS_GAFR0_L_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GAFR0_U
|
|
ldr r1, =CONFIG_SYS_GAFR0_U_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GAFR1_L
|
|
ldr r1, =CONFIG_SYS_GAFR1_L_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GAFR1_U
|
|
ldr r1, =CONFIG_SYS_GAFR1_U_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GAFR2_L
|
|
ldr r1, =CONFIG_SYS_GAFR2_L_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GAFR2_U
|
|
ldr r1, =CONFIG_SYS_GAFR2_U_VAL
|
|
str r1, [r0]
|
|
|
|
/* enable GPIO pins */
|
|
ldr r0, =PSSR
|
|
ldr r1, =CONFIG_SYS_PSSR_VAL
|
|
str r1, [r0]
|
|
|
|
|
|
/*********************************************************************
|
|
Initlialize Memory Controller
|
|
|
|
See PXA250 Operating System Developer's Guide
|
|
|
|
pause for 200 uSecs- allow internal clocks to settle
|
|
*Note: only need this if hard reset... doing it anyway for now
|
|
*/
|
|
|
|
@ Step 1
|
|
@ ---- Wait 200 usec
|
|
ldr r3, =OSCR @ reset the OS Timer Count to zero
|
|
mov r2, #0
|
|
str r2, [r3]
|
|
ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty
|
|
1:
|
|
ldr r2, [r3]
|
|
cmp r4, r2
|
|
bgt 1b
|
|
|
|
mem_init:
|
|
@ get memory controller base address
|
|
ldr r1, =MEMC_BASE
|
|
|
|
@****************************************************************************
|
|
@ Step 2
|
|
@
|
|
|
|
@ Step 2a
|
|
@ write msc0, read back to ensure data latches
|
|
@
|
|
ldr r2, =CONFIG_SYS_MSC0_VAL
|
|
str r2, [r1, #MSC0_OFFSET]
|
|
ldr r2, [r1, #MSC0_OFFSET]
|
|
|
|
@ write msc1
|
|
ldr r2, =CONFIG_SYS_MSC1_VAL
|
|
str r2, [r1, #MSC1_OFFSET]
|
|
ldr r2, [r1, #MSC1_OFFSET]
|
|
|
|
@ write msc2
|
|
ldr r2, =CONFIG_SYS_MSC2_VAL
|
|
str r2, [r1, #MSC2_OFFSET]
|
|
ldr r2, [r1, #MSC2_OFFSET]
|
|
|
|
|
|
@ Step 2b
|
|
@ write mecr
|
|
ldr r2, =CONFIG_SYS_MECR_VAL
|
|
str r2, [r1, #MECR_OFFSET]
|
|
|
|
@ write mcmem0
|
|
ldr r2, =CONFIG_SYS_MCMEM0_VAL
|
|
str r2, [r1, #MCMEM0_OFFSET]
|
|
|
|
@ write mcmem1
|
|
ldr r2, =CONFIG_SYS_MCMEM1_VAL
|
|
str r2, [r1, #MCMEM1_OFFSET]
|
|
|
|
@ write mcatt0
|
|
ldr r2, =CONFIG_SYS_MCATT0_VAL
|
|
str r2, [r1, #MCATT0_OFFSET]
|
|
|
|
@ write mcatt1
|
|
ldr r2, =CONFIG_SYS_MCATT1_VAL
|
|
str r2, [r1, #MCATT1_OFFSET]
|
|
|
|
@ write mcio0
|
|
ldr r2, =CONFIG_SYS_MCIO0_VAL
|
|
str r2, [r1, #MCIO0_OFFSET]
|
|
|
|
@ write mcio1
|
|
ldr r2, =CONFIG_SYS_MCIO1_VAL
|
|
str r2, [r1, #MCIO1_OFFSET]
|
|
|
|
@ Step 2c
|
|
@ fly-by-dma is defeatured on this part
|
|
@ write flycnfg
|
|
@ldr r2, =CONFIG_SYS_FLYCNFG_VAL
|
|
@str r2, [r1, #FLYCNFG_OFFSET]
|
|
|
|
/* FIXME Does this sequence really make sense */
|
|
#ifdef REDBOOT_WAY
|
|
@ Step 2d
|
|
@ get the mdrefr settings
|
|
ldr r3, =CONFIG_SYS_MDREFR_VAL
|
|
|
|
@ extract DRI field (we need a valid DRI field)
|
|
@
|
|
ldr r2, =0xFFF
|
|
|
|
@ valid DRI field in r3
|
|
@
|
|
and r3, r3, r2
|
|
|
|
@ get the reset state of MDREFR
|
|
@
|
|
ldr r4, [r1, #MDREFR_OFFSET]
|
|
|
|
@ clear the DRI field
|
|
@
|
|
bic r4, r4, r2
|
|
|
|
@ insert the valid DRI field loaded above
|
|
@
|
|
orr r4, r4, r3
|
|
|
|
@ write back mdrefr
|
|
@
|
|
str r4, [r1, #MDREFR_OFFSET]
|
|
|
|
@ *Note: preserve the mdrefr value in r4 *
|
|
|
|
@****************************************************************************
|
|
@ Step 3
|
|
@
|
|
@ NO SRAM
|
|
|
|
mov pc, r10
|
|
|
|
|
|
@****************************************************************************
|
|
@ Step 4
|
|
@
|
|
|
|
@ Assumes previous mdrefr value in r4, if not then read current mdrefr
|
|
|
|
@ clear the free-running clock bits
|
|
@ (clear K0Free, K1Free, K2Free
|
|
@
|
|
bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000)
|
|
|
|
@ set K0RUN for CPLD clock
|
|
@
|
|
orr r4, r4, #0x00002000
|
|
|
|
@ set K1RUN if bank 0 installed
|
|
@
|
|
orr r4, r4, #0x00010000
|
|
|
|
@ write back mdrefr
|
|
@
|
|
str r4, [r1, #MDREFR_OFFSET]
|
|
ldr r4, [r1, #MDREFR_OFFSET]
|
|
|
|
@ deassert SLFRSH
|
|
@
|
|
bic r4, r4, #0x00400000
|
|
|
|
@ write back mdrefr
|
|
@
|
|
str r4, [r1, #MDREFR_OFFSET]
|
|
|
|
@ assert E1PIN
|
|
@
|
|
orr r4, r4, #0x00008000
|
|
|
|
@ write back mdrefr
|
|
@
|
|
str r4, [r1, #MDREFR_OFFSET]
|
|
ldr r4, [r1, #MDREFR_OFFSET]
|
|
nop
|
|
nop
|
|
#else
|
|
@ Step 2d
|
|
@ get the mdrefr settings
|
|
ldr r3, =CONFIG_SYS_MDREFR_VAL
|
|
|
|
@ write back mdrefr
|
|
@
|
|
str r4, [r1, #MDREFR_OFFSET]
|
|
|
|
@ Step 4
|
|
|
|
@ set K0RUN for CPLD clock
|
|
@
|
|
orr r4, r4, #0x00002000
|
|
|
|
@ set K1RUN for bank 0
|
|
@
|
|
orr r4, r4, #0x00010000
|
|
|
|
@ write back mdrefr
|
|
@
|
|
str r4, [r1, #MDREFR_OFFSET]
|
|
ldr r4, [r1, #MDREFR_OFFSET]
|
|
|
|
@ deassert SLFRSH
|
|
@
|
|
bic r4, r4, #0x00400000
|
|
|
|
@ write back mdrefr
|
|
@
|
|
str r4, [r1, #MDREFR_OFFSET]
|
|
|
|
@ assert E1PIN
|
|
@
|
|
orr r4, r4, #0x00008000
|
|
|
|
@ write back mdrefr
|
|
@
|
|
str r4, [r1, #MDREFR_OFFSET]
|
|
ldr r4, [r1, #MDREFR_OFFSET]
|
|
nop
|
|
nop
|
|
#endif
|
|
|
|
@ Step 4d
|
|
@ fetch platform value of mdcnfg
|
|
@
|
|
ldr r2, =CONFIG_SYS_MDCNFG_VAL
|
|
|
|
@ disable all sdram banks
|
|
@
|
|
bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1)
|
|
bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3)
|
|
|
|
@ program banks 0/1 for bus width
|
|
@
|
|
bic r2, r2, #MDCNFG_DWID0 @0=32-bit
|
|
|
|
@ write initial value of mdcnfg, w/o enabling sdram banks
|
|
@
|
|
str r2, [r1, #MDCNFG_OFFSET]
|
|
|
|
@ Step 4e
|
|
@ pause for 200 uSecs
|
|
@
|
|
ldr r3, =OSCR @ reset the OS Timer Count to zero
|
|
mov r2, #0
|
|
str r2, [r3]
|
|
ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty
|
|
1:
|
|
ldr r2, [r3]
|
|
cmp r4, r2
|
|
bgt 1b
|
|
|
|
/* Why is this here??? */
|
|
mov r0, #0x78 @turn everything off
|
|
mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.)
|
|
|
|
@ Step 4f
|
|
@ Access memory *not yet enabled* for CBR refresh cycles (8)
|
|
@ - CBR is generated for all banks
|
|
|
|
ldr r2, =CONFIG_SYS_DRAM_BASE
|
|
str r2, [r2]
|
|
str r2, [r2]
|
|
str r2, [r2]
|
|
str r2, [r2]
|
|
str r2, [r2]
|
|
str r2, [r2]
|
|
str r2, [r2]
|
|
str r2, [r2]
|
|
|
|
@ Step 4g
|
|
@get memory controller base address
|
|
@
|
|
ldr r1, =MEMC_BASE
|
|
|
|
@fetch current mdcnfg value
|
|
@
|
|
ldr r3, [r1, #MDCNFG_OFFSET]
|
|
|
|
@enable sdram bank 0 if installed (must do for any populated bank)
|
|
@
|
|
orr r3, r3, #MDCNFG_DE0
|
|
|
|
@write back mdcnfg, enabling the sdram bank(s)
|
|
@
|
|
str r3, [r1, #MDCNFG_OFFSET]
|
|
|
|
@ Step 4h
|
|
@ write mdmrs
|
|
@
|
|
ldr r2, =CONFIG_SYS_MDMRS_VAL
|
|
str r2, [r1, #MDMRS_OFFSET]
|
|
|
|
@ Done Memory Init
|
|
|
|
/*SET_LED 6 */
|
|
|
|
@********************************************************************
|
|
@ Disable (mask) all interrupts at the interrupt controller
|
|
@
|
|
|
|
@ clear the interrupt level register (use IRQ, not FIQ)
|
|
@
|
|
mov r1, #0
|
|
ldr r2, =ICLR
|
|
str r1, [r2]
|
|
|
|
@ Set interrupt mask register
|
|
@
|
|
ldr r1, =CONFIG_SYS_ICMR_VAL
|
|
ldr r2, =ICMR
|
|
str r1, [r2]
|
|
|
|
@ ********************************************************************
|
|
@ Disable the peripheral clocks, and set the core clock
|
|
@
|
|
|
|
@ Turn Off ALL on-chip peripheral clocks for re-configuration
|
|
@
|
|
ldr r1, =CKEN
|
|
mov r2, #0
|
|
str r2, [r1]
|
|
|
|
@ set core clocks
|
|
@
|
|
ldr r2, =CONFIG_SYS_CCCR_VAL
|
|
ldr r1, =CCCR
|
|
str r2, [r1]
|
|
|
|
#ifdef ENABLE32KHZ
|
|
@ enable the 32Khz oscillator for RTC and PowerManager
|
|
@
|
|
ldr r1, =OSCC
|
|
mov r2, #OSCC_OON
|
|
str r2, [r1]
|
|
|
|
@ NOTE: spin here until OSCC.OOK get set,
|
|
@ meaning the PLL has settled.
|
|
@
|
|
60:
|
|
ldr r2, [r1]
|
|
ands r2, r2, #1
|
|
beq 60b
|
|
#endif
|
|
|
|
@ Turn on needed clocks
|
|
@
|
|
ldr r1, =CKEN
|
|
ldr r2, =CONFIG_SYS_CKEN_VAL
|
|
str r2, [r1]
|
|
|
|
/*SET_LED 7 */
|
|
|
|
/* Is this needed???? */
|
|
#define NODEBUG
|
|
#ifdef NODEBUG
|
|
/*Disable software and data breakpoints */
|
|
mov r0,#0
|
|
mcr p15,0,r0,c14,c8,0 /* ibcr0 */
|
|
mcr p15,0,r0,c14,c9,0 /* ibcr1 */
|
|
mcr p15,0,r0,c14,c4,0 /* dbcon */
|
|
|
|
/*Enable all debug functionality */
|
|
mov r0,#0x80000000
|
|
mcr p14,0,r0,c10,c0,0 /* dcsr */
|
|
|
|
#endif
|
|
|
|
mov pc, r10
|
|
|
|
@ End lowlevel_init
|