Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 07:13:03 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/phy/phy-mtk-tphy.c
Chunfeng Yun 39b854ae86 phy: phy-mtk-tphy: add support mt8195 
The T-PHY controller is designed to use use PLL integer mode, but
in fact use fractional mode for some ones on mt8195 by mistake,
this causes signal degradation (e.g. eye diagram test fail), fix
it by switching PLL to 26Mhz from default 48Mhz to improve signal
quality.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2023-03-02 22:43:43 +01:00

796 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015 - 2019 MediaTek Inc.
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
* Ryder Lee <ryder.lee@mediatek.com>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <generic-phy.h>
#include <malloc.h>
#include <mapmem.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <dm/devres.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <dt-bindings/phy/phy.h>
/* version V1 sub-banks offset base address */
/* banks shared by multiple phys */
#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */
#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */
/* u2 phy bank */
#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
/* u3/pcie/sata phy banks */
#define SSUSB_SIFSLV_V1_U3PHYD 0x000
#define SSUSB_SIFSLV_V1_U3PHYA 0x200
/* version V2 sub-banks offset base address */
/* u2 phy banks */
#define SSUSB_SIFSLV_V2_MISC 0x000
#define SSUSB_SIFSLV_V2_U2FREQ 0x100
#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300
/* u3/pcie/sata phy banks */
#define SSUSB_SIFSLV_V2_SPLLC 0x000
#define SSUSB_SIFSLV_V2_CHIP 0x100
#define SSUSB_SIFSLV_V2_U3PHYD 0x200
#define SSUSB_SIFSLV_V2_U3PHYA 0x400
#define U3P_USBPHYACR0 0x000
#define PA0_RG_U2PLL_FORCE_ON BIT(15)
#define PA0_USB20_PLL_PREDIV GENMASK(7, 6)
#define PA0_RG_USB20_INTR_EN BIT(5)
#define U3P_USBPHYACR2 0x008
#define PA2_RG_U2PLL_BW GENMASK(21, 19)
#define U3P_USBPHYACR5 0x014
#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15)
#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
#define U3P_USBPHYACR6 0x018
#define PA6_RG_U2_BC11_SW_EN BIT(23)
#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
#define PA6_RG_U2_SQTH GENMASK(3, 0)
#define U3P_U2PHYACR4 0x020
#define P2C_RG_USB20_GPIO_CTL BIT(9)
#define P2C_USB20_GPIO_MODE BIT(8)
#define P2C_U2_GPIO_CTR_MSK \
(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
#define U3P_U2PHYA_RESV 0x030
#define P2R_RG_U2PLL_FBDIV_26M 0x1bb13b
#define P2R_RG_U2PLL_FBDIV_48M 0x3c0000
#define U3P_U2PHYA_RESV1 0x044
#define P2R_RG_U2PLL_REFCLK_SEL BIT(5)
#define P2R_RG_U2PLL_FRA_EN BIT(3)
#define U3P_U2PHYDTM0 0x068
#define P2C_FORCE_UART_EN BIT(26)
#define P2C_FORCE_DATAIN BIT(23)
#define P2C_FORCE_DM_PULLDOWN BIT(21)
#define P2C_FORCE_DP_PULLDOWN BIT(20)
#define P2C_FORCE_XCVRSEL BIT(19)
#define P2C_FORCE_SUSPENDM BIT(18)
#define P2C_FORCE_TERMSEL BIT(17)
#define P2C_RG_DATAIN GENMASK(13, 10)
#define P2C_RG_DMPULLDOWN BIT(7)
#define P2C_RG_DPPULLDOWN BIT(6)
#define P2C_RG_XCVRSEL GENMASK(5, 4)
#define P2C_RG_SUSPENDM BIT(3)
#define P2C_RG_TERMSEL BIT(2)
#define P2C_DTM0_PART_MASK \
(P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
#define U3P_U2PHYDTM1 0x06C
#define P2C_RG_UART_EN BIT(16)
#define P2C_FORCE_IDDIG BIT(9)
#define P2C_RG_VBUSVALID BIT(5)
#define P2C_RG_SESSEND BIT(4)
#define P2C_RG_AVALID BIT(2)
#define P2C_RG_IDDIG BIT(1)
#define U3P_U3_CHIP_GPIO_CTLD 0x0c
#define P3C_REG_IP_SW_RST BIT(31)
#define P3C_MCU_BUS_CK_GATE_EN BIT(30)
#define P3C_FORCE_IP_SW_RST BIT(29)
#define U3P_U3_CHIP_GPIO_CTLE 0x10
#define P3C_RG_SWRST_U3_PHYD BIT(25)
#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24)
#define U3P_U3_PHYA_REG0 0x000
#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
#define U3P_U3_PHYA_REG1 0x004
#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
#define U3P_U3_PHYA_REG6 0x018
#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
#define U3P_U3_PHYA_REG9 0x024
#define P3A_RG_RX_DAC_MUX GENMASK(5, 1)
#define U3P_U3_PHYA_DA_REG0 0x100
#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12)
#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
#define U3P_U3_PHYA_DA_REG4 0x108
#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19)
#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6)
#define U3P_U3_PHYA_DA_REG5 0x10c
#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28)
#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12)
#define U3P_U3_PHYA_DA_REG6 0x110
#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16)
#define U3P_U3_PHYA_DA_REG7 0x114
#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16)
#define U3P_U3_PHYA_DA_REG20 0x13c
#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16)
#define U3P_U3_PHYA_DA_REG25 0x148
#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
#define U3P_U3_PHYD_LFPS1 0x00c
#define P3D_RG_FWAKE_TH GENMASK(21, 16)
#define U3P_U3_PHYD_CDR1 0x05c
#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8)
#define U3P_U3_PHYD_RXDET1 0x128
#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9)
#define U3P_U3_PHYD_RXDET2 0x12c
#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0)
#define U3P_SPLLC_XTALCTL3 0x018
#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
/* SATA register setting */
#define PHYD_CTRL_SIGNAL_MODE4 0x1c
/* CDR Charge Pump P-path current adjustment */
#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
#define PHYD_DESIGN_OPTION2 0x24
/* Symbol lock count selection */
#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
#define PHYD_DESIGN_OPTION9 0x40
/* COMWAK GAP width window */
#define RG_TG_MAX_MSK GENMASK(20, 16)
/* COMINIT GAP width window */
#define RG_T2_MAX_MSK GENMASK(13, 8)
/* COMWAK GAP width window */
#define RG_TG_MIN_MSK GENMASK(7, 5)
/* COMINIT GAP width window */
#define RG_T2_MIN_MSK GENMASK(4, 0)
#define ANA_RG_CTRL_SIGNAL1 0x4c
/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
#define ANA_RG_CTRL_SIGNAL4 0x58
#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
/* Loop filter R1 resistance adjustment for Gen1 speed */
#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
#define ANA_RG_CTRL_SIGNAL6 0x60
/* I-path capacitance adjustment for Gen1 */
#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
/* RX Gen1 LEQ tuning step */
#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
enum mtk_phy_version {
MTK_TPHY_V1 = 1,
MTK_TPHY_V2,
};
struct tphy_pdata {
enum mtk_phy_version version;
/*
* workaround only for mt8195:
* u2phy should use integer mode instead of fractional mode of
* 48M PLL, fix it by switching PLL to 26M from default 48M
*/
bool sw_pll_48m_to_26m;
};
struct u2phy_banks {
void __iomem *misc;
void __iomem *fmreg;
void __iomem *com;
};
struct u3phy_banks {
void __iomem *spllc;
void __iomem *chip;
void __iomem *phyd; /* include u3phyd_bank2 */
void __iomem *phya; /* include u3phya_da */
};
struct mtk_phy_instance {
void __iomem *port_base;
const struct device_node *np;
union {
struct u2phy_banks u2_banks;
struct u3phy_banks u3_banks;
};
struct clk ref_clk; /* reference clock of (digital) phy */
struct clk da_ref_clk; /* reference clock of analog phy */
u32 index;
u32 type;
};
struct mtk_tphy {
struct udevice *dev;
void __iomem *sif_base;
const struct tphy_pdata *pdata;
struct mtk_phy_instance **phys;
int nphys;
};
/* workaround only for mt8195 */
static void u2_phy_pll_26m_set(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
if (!tphy->pdata->sw_pll_48m_to_26m)
return;
clrsetbits_le32(u2_banks->com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV,
FIELD_PREP(PA0_USB20_PLL_PREDIV, 0));
clrsetbits_le32(u2_banks->com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW,
FIELD_PREP(PA2_RG_U2PLL_BW, 3));
writel(P2R_RG_U2PLL_FBDIV_26M, u2_banks->com + U3P_U2PHYA_RESV);
setbits_le32(u2_banks->com + U3P_U2PHYA_RESV1,
P2R_RG_U2PLL_FRA_EN | P2R_RG_U2PLL_REFCLK_SEL);
}
static void u2_phy_instance_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
/* switch to USB function, and enable usb pll */
clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM0,
P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM,
FIELD_PREP(P2C_RG_XCVRSEL, 1) |
FIELD_PREP(P2C_RG_DATAIN, 0));
clrbits_le32(u2_banks->com + U3P_U2PHYDTM1, P2C_RG_UART_EN);
setbits_le32(u2_banks->com + U3P_USBPHYACR0, PA0_RG_USB20_INTR_EN);
/* disable switch 100uA current to SSUSB */
clrbits_le32(u2_banks->com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN);
clrbits_le32(u2_banks->com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
/* DP/DM BC1.1 path Disable */
clrsetbits_le32(u2_banks->com + U3P_USBPHYACR6,
PA6_RG_U2_BC11_SW_EN | PA6_RG_U2_SQTH,
FIELD_PREP(PA6_RG_U2_SQTH, 2));
/* set HS slew rate */
clrsetbits_le32(u2_banks->com + U3P_USBPHYACR5,
PA5_RG_U2_HSTX_SRCTRL,
FIELD_PREP(PA5_RG_U2_HSTX_SRCTRL, 4));
u2_phy_pll_26m_set(tphy, instance);
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
}
static void u2_phy_instance_power_on(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
clrbits_le32(u2_banks->com + U3P_U2PHYDTM0,
P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
/* OTG Enable */
setbits_le32(u2_banks->com + U3P_USBPHYACR6,
PA6_RG_U2_OTG_VBUSCMP_EN);
clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM1,
P2C_RG_SESSEND, P2C_RG_VBUSVALID | P2C_RG_AVALID);
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
}
static void u2_phy_instance_power_off(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
clrbits_le32(u2_banks->com + U3P_U2PHYDTM0,
P2C_RG_XCVRSEL | P2C_RG_DATAIN);
/* OTG Disable */
clrbits_le32(u2_banks->com + U3P_USBPHYACR6,
PA6_RG_U2_OTG_VBUSCMP_EN);
clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM1,
P2C_RG_VBUSVALID | P2C_RG_AVALID, P2C_RG_SESSEND);
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
}
static void u3_phy_instance_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u3phy_banks *u3_banks = &instance->u3_banks;
/* gating PCIe Analog XTAL clock */
setbits_le32(u3_banks->spllc + U3P_SPLLC_XTALCTL3,
XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD);
/* gating XSQ */
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0,
P3A_RG_XTAL_EXT_EN_U3,
FIELD_PREP(P3A_RG_XTAL_EXT_EN_U3, 2));
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG9,
P3A_RG_RX_DAC_MUX, FIELD_PREP(P3A_RG_RX_DAC_MUX, 4));
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG6,
P3A_RG_TX_EIDLE_CM,
FIELD_PREP(P3A_RG_TX_EIDLE_CM, 0xe));
clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_CDR1,
P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1,
FIELD_PREP(P3D_RG_CDR_BIR_LTD0, 0xc) |
FIELD_PREP(P3D_RG_CDR_BIR_LTD1, 0x3));
clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_LFPS1,
P3D_RG_FWAKE_TH, FIELD_PREP(P3D_RG_FWAKE_TH, 0x34));
clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET1,
P3D_RG_RXDET_STB2_SET,
FIELD_PREP(P3D_RG_RXDET_STB2_SET, 0x10));
clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET2,
P3D_RG_RXDET_STB2_SET_P3,
FIELD_PREP(P3D_RG_RXDET_STB2_SET_P3, 0x10));
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
}
static void pcie_phy_instance_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u3phy_banks *u3_banks = &instance->u3_banks;
if (tphy->pdata->version != MTK_TPHY_V1)
return;
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0,
P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H,
FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) |
FIELD_PREP(P3A_RG_XTAL_EXT_PE2H, 0x2));
/* ref clk drive */
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP,
FIELD_PREP(P3A_RG_CLKDRV_AMP, 0x4));
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF,
FIELD_PREP(P3A_RG_CLKDRV_OFF, 0x1));
/* SSC delta -5000ppm */
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG20,
P3A_RG_PLL_DELTA1_PE2H,
FIELD_PREP(P3A_RG_PLL_DELTA1_PE2H, 0x3c));
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG25,
P3A_RG_PLL_DELTA_PE2H,
FIELD_PREP(P3A_RG_PLL_DELTA_PE2H, 0x36));
/* change pll BW 0.6M */
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG5,
P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H,
FIELD_PREP(P3A_RG_PLL_BR_PE2H, 0x1) |
FIELD_PREP(P3A_RG_PLL_IC_PE2H, 0x1));
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG4,
P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H,
FIELD_PREP(P3A_RG_PLL_BC_PE2H, 0x3));
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG6,
P3A_RG_PLL_IR_PE2H,
FIELD_PREP(P3A_RG_PLL_IR_PE2H, 0x2));
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG7,
P3A_RG_PLL_BP_PE2H,
FIELD_PREP(P3A_RG_PLL_BP_PE2H, 0xa));
/* Tx Detect Rx Timing: 10us -> 5us */
clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET1,
P3D_RG_RXDET_STB2_SET,
FIELD_PREP(P3D_RG_RXDET_STB2_SET, 0x10));
clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET2,
P3D_RG_RXDET_STB2_SET_P3,
FIELD_PREP(P3D_RG_RXDET_STB2_SET_P3, 0x10));
/* wait for PCIe subsys register to active */
udelay(3000);
}
static void sata_phy_instance_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u3phy_banks *u3_banks = &instance->u3_banks;
clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL6,
RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK,
FIELD_PREP(RG_CDR_BIRLTR_GEN1_MSK, 0x6) |
FIELD_PREP(RG_CDR_BC_GEN1_MSK, 0x1a));
clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL4,
RG_CDR_BIRLTD0_GEN1_MSK,
FIELD_PREP(RG_CDR_BIRLTD0_GEN1_MSK, 0x18));
clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL5,
RG_CDR_BIRLTD0_GEN3_MSK,
FIELD_PREP(RG_CDR_BIRLTD0_GEN3_MSK, 0x06));
clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL4,
RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK,
FIELD_PREP(RG_CDR_BICLTR_GEN1_MSK, 0x0c) |
FIELD_PREP(RG_CDR_BR_GEN2_MSK, 0x07));
clrsetbits_le32(u3_banks->phyd + PHYD_CTRL_SIGNAL_MODE4,
RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK,
FIELD_PREP(RG_CDR_BICLTD0_GEN1_MSK, 0x08) |
FIELD_PREP(RG_CDR_BICLTD1_GEN1_MSK, 0x02));
clrsetbits_le32(u3_banks->phyd + PHYD_DESIGN_OPTION2,
RG_LOCK_CNT_SEL_MSK,
FIELD_PREP(RG_LOCK_CNT_SEL_MSK, 0x02));
clrsetbits_le32(u3_banks->phyd + PHYD_DESIGN_OPTION9,
RG_T2_MIN_MSK | RG_TG_MIN_MSK |
RG_T2_MAX_MSK | RG_TG_MAX_MSK,
FIELD_PREP(RG_T2_MIN_MSK, 0x12) |
FIELD_PREP(RG_TG_MIN_MSK, 0x04) |
FIELD_PREP(RG_T2_MAX_MSK, 0x31) |
FIELD_PREP(RG_TG_MAX_MSK, 0x0e));
clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL1,
RG_IDRV_0DB_GEN1_MSK,
FIELD_PREP(RG_IDRV_0DB_GEN1_MSK, 0x20));
clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL1,
RG_EQ_DLEQ_LFI_GEN1_MSK,
FIELD_PREP(RG_EQ_DLEQ_LFI_GEN1_MSK, 0x03));
}
static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u3phy_banks *bank = &instance->u3_banks;
clrbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLD,
P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST);
clrbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLE,
P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
}
static void pcie_phy_instance_power_off(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u3phy_banks *bank = &instance->u3_banks;
setbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLD,
P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST);
setbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLE,
P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
}
static void phy_v1_banks_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
struct u3phy_banks *u3_banks = &instance->u3_banks;
switch (instance->type) {
case PHY_TYPE_USB2:
u2_banks->misc = NULL;
u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
break;
case PHY_TYPE_USB3:
case PHY_TYPE_PCIE:
u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
break;
case PHY_TYPE_SATA:
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
break;
default:
dev_err(tphy->dev, "incompatible PHY type\n");
return;
}
}
static void phy_v2_banks_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
struct u3phy_banks *u3_banks = &instance->u3_banks;
switch (instance->type) {
case PHY_TYPE_USB2:
u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
break;
case PHY_TYPE_USB3:
case PHY_TYPE_PCIE:
u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
break;
default:
dev_err(tphy->dev, "incompatible PHY type\n");
return;
}
}
static int mtk_phy_init(struct phy *phy)
{
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
struct mtk_phy_instance *instance = tphy->phys[phy->id];
int ret;
ret = clk_enable(&instance->ref_clk);
if (ret < 0) {
dev_err(tphy->dev, "failed to enable ref_clk\n");
return ret;
}
ret = clk_enable(&instance->da_ref_clk);
if (ret < 0) {
dev_err(tphy->dev, "failed to enable da_ref_clk %d\n", ret);
clk_disable(&instance->ref_clk);
return ret;
}
switch (instance->type) {
case PHY_TYPE_USB2:
u2_phy_instance_init(tphy, instance);
break;
case PHY_TYPE_USB3:
u3_phy_instance_init(tphy, instance);
break;
case PHY_TYPE_PCIE:
pcie_phy_instance_init(tphy, instance);
break;
case PHY_TYPE_SATA:
sata_phy_instance_init(tphy, instance);
break;
default:
dev_err(tphy->dev, "incompatible PHY type\n");
return -EINVAL;
}
return 0;
}
static int mtk_phy_power_on(struct phy *phy)
{
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
struct mtk_phy_instance *instance = tphy->phys[phy->id];
if (instance->type == PHY_TYPE_USB2)
u2_phy_instance_power_on(tphy, instance);
else if (instance->type == PHY_TYPE_PCIE)
pcie_phy_instance_power_on(tphy, instance);
return 0;
}
static int mtk_phy_power_off(struct phy *phy)
{
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
struct mtk_phy_instance *instance = tphy->phys[phy->id];
if (instance->type == PHY_TYPE_USB2)
u2_phy_instance_power_off(tphy, instance);
else if (instance->type == PHY_TYPE_PCIE)
pcie_phy_instance_power_off(tphy, instance);
return 0;
}
static int mtk_phy_exit(struct phy *phy)
{
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
struct mtk_phy_instance *instance = tphy->phys[phy->id];
clk_disable(&instance->da_ref_clk);
clk_disable(&instance->ref_clk);
return 0;
}
static int mtk_phy_xlate(struct phy *phy,
struct ofnode_phandle_args *args)
{
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
struct mtk_phy_instance *instance = NULL;
const struct device_node *phy_np = ofnode_to_np(args->node);
u32 index;
if (!phy_np) {
dev_err(phy->dev, "null pointer phy node\n");
return -EINVAL;
}
if (args->args_count < 1) {
dev_err(phy->dev, "invalid number of cells in 'phy' property\n");
return -EINVAL;
}
for (index = 0; index < tphy->nphys; index++)
if (phy_np == tphy->phys[index]->np) {
instance = tphy->phys[index];
break;
}
if (!instance) {
dev_err(phy->dev, "failed to find appropriate phy\n");
return -EINVAL;
}
phy->id = index;
instance->type = args->args[1];
if (!(instance->type == PHY_TYPE_USB2 ||
instance->type == PHY_TYPE_USB3 ||
instance->type == PHY_TYPE_SATA ||
instance->type == PHY_TYPE_PCIE)) {
dev_err(phy->dev, "unsupported device type\n");
return -EINVAL;
}
switch (tphy->pdata->version) {
case MTK_TPHY_V1:
phy_v1_banks_init(tphy, instance);
break;
case MTK_TPHY_V2:
phy_v2_banks_init(tphy, instance);
break;
default:
dev_err(phy->dev, "phy version is not supported\n");
return -EINVAL;
}
return 0;
}
static const struct phy_ops mtk_tphy_ops = {
.init = mtk_phy_init,
.exit = mtk_phy_exit,
.power_on = mtk_phy_power_on,
.power_off = mtk_phy_power_off,
.of_xlate = mtk_phy_xlate,
};
static int mtk_tphy_probe(struct udevice *dev)
{
struct mtk_tphy *tphy = dev_get_priv(dev);
ofnode subnode;
int index = 0;
tphy->nphys = dev_get_child_count(dev);
tphy->phys = devm_kcalloc(dev, tphy->nphys, sizeof(*tphy->phys),
GFP_KERNEL);
if (!tphy->phys)
return -ENOMEM;
tphy->dev = dev;
tphy->pdata = (void *)dev_get_driver_data(dev);
/* v1 has shared banks for usb/pcie mode, */
/* but not for sata mode */
if (tphy->pdata->version == MTK_TPHY_V1)
tphy->sif_base = dev_read_addr_ptr(dev);
dev_for_each_subnode(subnode, dev) {
struct mtk_phy_instance *instance;
fdt_addr_t addr;
int err;
instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
if (!instance)
return -ENOMEM;
addr = ofnode_get_addr(subnode);
if (addr == FDT_ADDR_T_NONE)
return -ENOMEM;
instance->port_base = map_sysmem(addr, 0);
instance->index = index;
instance->np = ofnode_to_np(subnode);
tphy->phys[index] = instance;
index++;
err = clk_get_by_name_nodev_optional(subnode, "ref",
&instance->ref_clk);
if (err)
return err;
err = clk_get_by_name_nodev_optional(subnode, "da_ref",
&instance->da_ref_clk);
if (err)
return err;
}
return 0;
}
static struct tphy_pdata tphy_v1_pdata = {
.version = MTK_TPHY_V1,
};
static struct tphy_pdata tphy_v2_pdata = {
.version = MTK_TPHY_V2,
};
static struct tphy_pdata mt8195_pdata = {
.version = MTK_TPHY_V2,
.sw_pll_48m_to_26m = true,
};
static const struct udevice_id mtk_tphy_id_table[] = {
{
.compatible = "mediatek,generic-tphy-v1",
.data = (ulong)&tphy_v1_pdata,
},
{
.compatible = "mediatek,generic-tphy-v2",
.data = (ulong)&tphy_v2_pdata,
},
{
.compatible = "mediatek,mt8195-tphy",
.data = (ulong)&mt8195_pdata,
},
{ }
};
U_BOOT_DRIVER(mtk_tphy) = {
.name = "mtk-tphy",
.id = UCLASS_PHY,
.of_match = mtk_tphy_id_table,
.ops = &mtk_tphy_ops,
.probe = mtk_tphy_probe,
.priv_auto = sizeof(struct mtk_tphy),
};
Reference in a new issue View git blame Copy permalink