mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
d50d6817b5
Building U-Boot with CONFIG_PCI and CONFIG_DM_PCI enabled, but CONFIG_SPL_PCI_SUPPORT disabled, results in following linker error: lib/built-in.o: In function `fdtdec_get_pci_bar32': lib/fdtdec.c:305: undefined reference to `dm_pci_read_bar32' fdtdec.c:305:(.text.fdtdec_get_pci_bar32+0x24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dm_pci_read_bar32' This is because reference to dm_pci_read_bar32() remains in lib/fdtdec.c while SPL build does not descend into drivers/pci directory in drivers/Makefile if CONFIG_SPL_PCI_SUPPORT is not enabled. Fix this by applying appropriate #define guards in lib/fdtdec.c. It looks like ns16550.c has the same problem, so fixed that too. To simplify this, CONFIG_SPL_PCI_SUPPORT is renamed to CONFIG_SPL_PCI (enables use of CONFIG_IS_ENABLED() macro). Suggested-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
116 lines
3.5 KiB
Makefile
116 lines
3.5 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
|
|
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
|
|
obj-$(CONFIG_$(SPL_TPL_)DM) += core/
|
|
obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/
|
|
obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
|
|
obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
|
|
obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
|
|
obj-$(CONFIG_$(SPL_TPL_)LED) += led/
|
|
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
|
|
obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
|
|
obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
|
|
obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
|
|
obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
|
|
obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
|
|
obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
|
|
obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/
|
|
obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
|
|
obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
|
|
obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
|
|
obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
|
|
obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
|
|
obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
|
|
obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
|
|
obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
|
|
|
|
ifndef CONFIG_TPL_BUILD
|
|
ifdef CONFIG_SPL_BUILD
|
|
|
|
obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
|
|
obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
|
|
obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
|
|
obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
|
|
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
|
|
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
|
|
obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
|
|
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
|
|
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
|
|
obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
|
|
obj-$(CONFIG_SPL_DM_RESET) += reset/
|
|
obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
|
|
obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
|
|
obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
|
|
obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
|
|
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
|
|
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
|
|
obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
|
|
obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
|
|
obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
|
|
obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
|
|
obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
|
|
obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
|
|
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
|
|
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
|
|
obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
|
|
obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
|
|
obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
|
|
obj-$(CONFIG_SPL_THERMAL) += thermal/
|
|
|
|
endif
|
|
endif
|
|
|
|
ifdef CONFIG_TPL_BUILD
|
|
|
|
obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
|
|
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
|
|
|
|
obj-y += adc/
|
|
obj-y += ata/
|
|
obj-$(CONFIG_DM_DEMO) += demo/
|
|
obj-$(CONFIG_BIOSEMU) += bios_emulator/
|
|
obj-y += block/
|
|
obj-y += board/
|
|
obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
|
|
obj-$(CONFIG_CPU) += cpu/
|
|
obj-y += crypto/
|
|
obj-$(CONFIG_FASTBOOT) += fastboot/
|
|
obj-y += firmware/
|
|
obj-$(CONFIG_FPGA) += fpga/
|
|
obj-y += misc/
|
|
obj-$(CONFIG_MMC) += mmc/
|
|
obj-$(CONFIG_NVME) += nvme/
|
|
obj-y += pcmcia/
|
|
obj-y += dfu/
|
|
obj-$(CONFIG_X86) += pch/
|
|
obj-y += phy/allwinner/
|
|
obj-y += phy/marvell/
|
|
obj-y += rtc/
|
|
obj-y += scsi/
|
|
obj-y += sound/
|
|
obj-y += spmi/
|
|
obj-y += sysreset/
|
|
obj-y += video/
|
|
obj-y += watchdog/
|
|
obj-$(CONFIG_QE) += qe/
|
|
obj-$(CONFIG_U_QE) += qe/
|
|
obj-y += mailbox/
|
|
obj-y += memory/
|
|
obj-y += pwm/
|
|
obj-y += reset/
|
|
obj-y += input/
|
|
# SOC specific infrastructure drivers.
|
|
obj-y += smem/
|
|
obj-y += soc/
|
|
obj-y += thermal/
|
|
obj-$(CONFIG_TEE) += tee/
|
|
obj-y += axi/
|
|
obj-$(CONFIG_W1) += w1/
|
|
obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
|
|
|
|
obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
|
|
obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
|
|
endif
|