J. German Rivera b940ca64b2 armv8/fsl-lsch3: Add support to load and start MC Firmware ... Adding support to load and start the Layerscape Management Complex (MC) firmware. First, the MC GCR register is set to 0 to reset all cores. MC firmware and DPL images are copied from their location in NOR flash to DDR. MC registers are updated with the location of these images. Deasserting the reset bit of MC GCR register releases core 0 to run. Core 1 will be released by MC firmware. Stop bits are not touched for this step. U-boot waits for MC until it boots up. In case of a failure, device tree is updated accordingly. The MC firmware image uses FIT format. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com>		2014-07-03 08:40:58 +02:00
..
Makefile	armv8/fsl-lsch3: Add support to load and start MC Firmware	2014-07-03 08:40:58 +02:00
mc.c	armv8/fsl-lsch3: Add support to load and start MC Firmware	2014-07-03 08:40:58 +02:00