mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
364 lines
7.2 KiB
C
364 lines
7.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <console.h>
|
|
|
|
#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
|
|
#define FLASH_BANK_SIZE 0x200000
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
|
|
void flash_print_info (flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case (AMD_MANUFACT & FLASH_VENDMASK):
|
|
printf ("AMD: ");
|
|
break;
|
|
default:
|
|
printf ("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case (AMD_ID_PL160CB & FLASH_TYPEMASK):
|
|
printf ("AM29PL160CB (16Mbit)\n");
|
|
break;
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
goto Done;
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if ((i % 5) == 0) {
|
|
printf ("\n ");
|
|
}
|
|
printf (" %08lX%s", info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf ("\n");
|
|
|
|
Done:
|
|
return;
|
|
}
|
|
|
|
|
|
unsigned long flash_init (void)
|
|
{
|
|
int i, j;
|
|
ulong size = 0;
|
|
|
|
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
|
|
ulong flashbase = 0;
|
|
|
|
flash_info[i].flash_id =
|
|
(AMD_MANUFACT & FLASH_VENDMASK) |
|
|
(AMD_ID_PL160CB & FLASH_TYPEMASK);
|
|
flash_info[i].size = FLASH_BANK_SIZE;
|
|
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
|
|
if (i == 0)
|
|
flashbase = PHYS_FLASH_1;
|
|
else
|
|
panic ("configured to many flash banks!\n");
|
|
|
|
for (j = 0; j < flash_info[i].sector_count; j++) {
|
|
if (j == 0) {
|
|
/* 1st is 16 KiB */
|
|
flash_info[i].start[j] = flashbase;
|
|
}
|
|
if ((j >= 1) && (j <= 2)) {
|
|
/* 2nd and 3rd are 8 KiB */
|
|
flash_info[i].start[j] =
|
|
flashbase + 0x4000 + 0x2000 * (j - 1);
|
|
}
|
|
if (j == 3) {
|
|
/* 4th is 224 KiB */
|
|
flash_info[i].start[j] = flashbase + 0x8000;
|
|
}
|
|
if ((j >= 4) && (j <= 10)) {
|
|
/* rest is 256 KiB */
|
|
flash_info[i].start[j] =
|
|
flashbase + 0x40000 + 0x40000 * (j -
|
|
4);
|
|
}
|
|
}
|
|
size += flash_info[i].size;
|
|
}
|
|
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_SYS_FLASH_BASE,
|
|
CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]);
|
|
|
|
return size;
|
|
}
|
|
|
|
|
|
#define CMD_READ_ARRAY 0x00F0
|
|
#define CMD_UNLOCK1 0x00AA
|
|
#define CMD_UNLOCK2 0x0055
|
|
#define CMD_ERASE_SETUP 0x0080
|
|
#define CMD_ERASE_CONFIRM 0x0030
|
|
#define CMD_PROGRAM 0x00A0
|
|
#define CMD_UNLOCK_BYPASS 0x0020
|
|
|
|
#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
|
|
#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
|
|
|
|
#define BIT_ERASE_DONE 0x0080
|
|
#define BIT_RDY_MASK 0x0080
|
|
#define BIT_PROGRAM_ERROR 0x0020
|
|
#define BIT_TIMEOUT 0x80000000 /* our flag */
|
|
|
|
#define READY 1
|
|
#define ERR 2
|
|
#define TMO 4
|
|
|
|
|
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
ulong result;
|
|
int iflag, cflag, prot, sect;
|
|
int rc = ERR_OK;
|
|
int chip1;
|
|
ulong start;
|
|
|
|
/* first look for protection bits */
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
return ERR_UNKNOWN_FLASH_TYPE;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
return ERR_INVAL;
|
|
}
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) !=
|
|
(AMD_MANUFACT & FLASH_VENDMASK)) {
|
|
return ERR_UNKNOWN_FLASH_VENDOR;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
if (prot)
|
|
return ERR_PROTECTED;
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
|
|
cflag = icache_status ();
|
|
icache_disable ();
|
|
iflag = disable_interrupts ();
|
|
|
|
printf ("\n");
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
|
|
printf ("Erasing sector %2d ... ", sect);
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer(0);
|
|
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
volatile u16 *addr =
|
|
(volatile u16 *) (info->start[sect]);
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
*addr = CMD_ERASE_CONFIRM;
|
|
|
|
/* wait until flash is ready */
|
|
chip1 = 0;
|
|
|
|
do {
|
|
result = *addr;
|
|
|
|
/* check timeout */
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
|
|
chip1 = TMO;
|
|
break;
|
|
}
|
|
|
|
if (!chip1
|
|
&& (result & 0xFFFF) & BIT_ERASE_DONE)
|
|
chip1 = READY;
|
|
|
|
} while (!chip1);
|
|
|
|
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
|
|
|
|
if (chip1 == ERR) {
|
|
rc = ERR_PROG_ERROR;
|
|
goto outahere;
|
|
}
|
|
if (chip1 == TMO) {
|
|
rc = ERR_TIMEOUT;
|
|
goto outahere;
|
|
}
|
|
|
|
printf ("ok.\n");
|
|
} else { /* it was protected */
|
|
|
|
printf ("protected!\n");
|
|
}
|
|
}
|
|
|
|
if (ctrlc ())
|
|
printf ("User Interrupt!\n");
|
|
|
|
outahere:
|
|
/* allow flash to settle - wait 10 ms */
|
|
udelay (10000);
|
|
|
|
if (iflag)
|
|
enable_interrupts ();
|
|
|
|
if (cflag)
|
|
icache_enable ();
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int write_word (flash_info_t * info, ulong dest, ulong data)
|
|
{
|
|
volatile u16 *addr = (volatile u16 *) dest;
|
|
ulong result;
|
|
int rc = ERR_OK;
|
|
int cflag, iflag;
|
|
int chip1;
|
|
ulong start;
|
|
|
|
/*
|
|
* Check if Flash is (sufficiently) erased
|
|
*/
|
|
result = *addr;
|
|
if ((result & data) != data)
|
|
return ERR_NOT_ERASED;
|
|
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
|
|
cflag = icache_status ();
|
|
icache_disable ();
|
|
iflag = disable_interrupts ();
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
MEM_FLASH_ADDR1 = CMD_PROGRAM;
|
|
*addr = data;
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer(0);
|
|
|
|
/* wait until flash is ready */
|
|
chip1 = 0;
|
|
do {
|
|
result = *addr;
|
|
|
|
/* check timeout */
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
chip1 = ERR | TMO;
|
|
break;
|
|
}
|
|
if (!chip1 && ((result & 0x80) == (data & 0x80)))
|
|
chip1 = READY;
|
|
|
|
} while (!chip1);
|
|
|
|
*addr = CMD_READ_ARRAY;
|
|
|
|
if (chip1 == ERR || *addr != data)
|
|
rc = ERR_PROG_ERROR;
|
|
|
|
if (iflag)
|
|
enable_interrupts ();
|
|
|
|
if (cflag)
|
|
icache_enable ();
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong wp, data;
|
|
int rc;
|
|
|
|
if (addr & 1) {
|
|
printf ("unaligned destination not supported\n");
|
|
return ERR_ALIGN;
|
|
}
|
|
|
|
#if 0
|
|
if (cnt & 1) {
|
|
printf ("odd transfer sizes not supported\n");
|
|
return ERR_ALIGN;
|
|
}
|
|
#endif
|
|
|
|
wp = addr;
|
|
|
|
if (addr & 1) {
|
|
data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
|
|
src);
|
|
if ((rc = write_word (info, wp - 1, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += 1;
|
|
wp += 1;
|
|
cnt -= 1;
|
|
}
|
|
|
|
while (cnt >= 2) {
|
|
data = *((volatile u16 *) src);
|
|
if ((rc = write_word (info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += 2;
|
|
wp += 2;
|
|
cnt -= 2;
|
|
}
|
|
|
|
if (cnt == 1) {
|
|
data = (*((volatile u8 *) src) << 8) |
|
|
*((volatile u8 *) (wp + 1));
|
|
if ((rc = write_word (info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += 1;
|
|
wp += 1;
|
|
cnt -= 1;
|
|
}
|
|
|
|
return ERR_OK;
|
|
}
|