mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 10:43:06 +00:00
358b6f72c2
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Acked-by: Kever Yang <kever.yang@rock-chips.com> Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
78 lines
2 KiB
Text
78 lines
2 KiB
Text
Here is the step-by-step to boot to U-Boot on RK3368-uQ7
|
|
|
|
Get the Source and build ATF
|
|
============================
|
|
|
|
> git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
|
|
> cd arm-trusted-firmware
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31
|
|
> cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin
|
|
|
|
Configure U-Boot
|
|
================
|
|
|
|
> cd ../u-boot
|
|
> make lion-rk3368_defconfig
|
|
|
|
Build the TPL/SPL stage
|
|
=======================
|
|
|
|
> make CROSS_COMPILE=aarch64-unknown-elf-
|
|
|
|
Build the full U-Boot and a FIT image including the ATF
|
|
=======================================================
|
|
|
|
> make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb
|
|
|
|
Flash the image
|
|
===============
|
|
|
|
Copy the SPL to offset 32k and the FIT image containing the payloads
|
|
(U-Boot proper, ATF, devicetree) to offset 256k card.
|
|
|
|
SD-Card
|
|
-------
|
|
|
|
> dd if=idbloader.img of=/dev/sdb seek=64
|
|
> dd if=u-boot.itb of=/dev/sdb seek=512
|
|
|
|
eMMC
|
|
----
|
|
|
|
rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with
|
|
help of the Rockchip loader binary.
|
|
|
|
> git clone https://github.com/rockchip-linux/rkdeveloptool
|
|
> cd rkdeveloptool
|
|
> autoreconf -i && && ./configure && make
|
|
> git clone https://github.com/rockchip-linux/rkbin.git
|
|
> ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin
|
|
> ./rkdeveloptool wl 64 ../spl.img
|
|
> ./rkdeveloptool wl 512 ../u-boot.itb
|
|
|
|
|
|
If everything went according to plan, you should see the following
|
|
output on UART0:
|
|
|
|
<debug_uart> U-Boot TPL board init
|
|
Trying to boot from BOOTROM
|
|
Returning to boot ROM...
|
|
Trying to boot from MMC1
|
|
NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443
|
|
NOTICE: BL31: Built : 18:04:47, Jul 5 2017
|
|
|
|
|
|
U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200)
|
|
|
|
Model: Theobroma Systems RK3368-uQ7 SoM
|
|
DRAM: 2 GiB
|
|
MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
|
|
Using default environment
|
|
|
|
In: serial@ff180000
|
|
Out: serial@ff180000
|
|
Err: serial@ff180000
|
|
Net:
|
|
Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e
|
|
eth0: ethernet@ff290000
|
|
Hit any key to stop autoboot: 2
|