mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-20 02:03:09 +00:00
a430fa06a4
NAND flavors, like serial and parallel, have a lot in common and would benefit to share code. Let's move raw (parallel) NAND specific code in a raw/ subdirectory, to ease the addition of a core file in nand/ and the introduction of a spi/ subdirectory specific to SPI NANDs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
203 lines
6 KiB
C
203 lines
6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Error Corrected Code Controller (ECC) - System peripherals regsters.
|
|
* Based on AT91SAM9260 datasheet revision B.
|
|
*/
|
|
|
|
#ifndef ATMEL_NAND_ECC_H
|
|
#define ATMEL_NAND_ECC_H
|
|
|
|
#define ATMEL_ECC_CR 0x00 /* Control register */
|
|
#define ATMEL_ECC_RST (1 << 0) /* Reset parity */
|
|
|
|
#define ATMEL_ECC_MR 0x04 /* Mode register */
|
|
#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */
|
|
#define ATMEL_ECC_PAGESIZE_528 (0)
|
|
#define ATMEL_ECC_PAGESIZE_1056 (1)
|
|
#define ATMEL_ECC_PAGESIZE_2112 (2)
|
|
#define ATMEL_ECC_PAGESIZE_4224 (3)
|
|
|
|
#define ATMEL_ECC_SR 0x08 /* Status register */
|
|
#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */
|
|
#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
|
|
#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */
|
|
|
|
#define ATMEL_ECC_PR 0x0c /* Parity register */
|
|
#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */
|
|
#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
|
|
|
|
#define ATMEL_ECC_NPR 0x10 /* NParity register */
|
|
#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
|
|
|
|
/* Register access macros for PMECC */
|
|
#define pmecc_readl(addr, reg) \
|
|
readl(&addr->reg)
|
|
|
|
#define pmecc_readb(addr, reg) \
|
|
readb(&addr->reg)
|
|
|
|
#define pmecc_writel(addr, reg, value) \
|
|
writel((value), &addr->reg)
|
|
|
|
/* PMECC Register Definitions */
|
|
#define PMECC_MAX_SECTOR_NUM 8
|
|
struct pmecc_regs {
|
|
u32 cfg; /* 0x00 PMECC Configuration Register */
|
|
u32 sarea; /* 0x04 PMECC Spare Area Size Register */
|
|
u32 saddr; /* 0x08 PMECC Start Address Register */
|
|
u32 eaddr; /* 0x0C PMECC End Address Register */
|
|
u32 clk; /* 0x10 PMECC Clock Control Register */
|
|
u32 ctrl; /* 0x14 PMECC Control Register */
|
|
u32 sr; /* 0x18 PMECC Status Register */
|
|
u32 ier; /* 0x1C PMECC Interrupt Enable Register */
|
|
u32 idr; /* 0x20 PMECC Interrupt Disable Register */
|
|
u32 imr; /* 0x24 PMECC Interrupt Mask Register */
|
|
u32 isr; /* 0x28 PMECC Interrupt Status Register */
|
|
u32 reserved0[5]; /* 0x2C-0x3C Reserved */
|
|
|
|
/* 0x40 + sector_num * (0x40), Redundancy Registers */
|
|
struct {
|
|
#ifdef CONFIG_SAMA5D2
|
|
u8 ecc[56]; /* PMECC Generated Redundancy Byte Per Sector */
|
|
u32 reserved1[2];
|
|
#else
|
|
u8 ecc[44]; /* PMECC Generated Redundancy Byte Per Sector */
|
|
u32 reserved1[5];
|
|
#endif
|
|
} ecc_port[PMECC_MAX_SECTOR_NUM];
|
|
|
|
/* 0x240 + sector_num * (0x40) Remainder Registers */
|
|
struct {
|
|
#ifdef CONFIG_SAMA5D2
|
|
u32 rem[16];
|
|
#else
|
|
u32 rem[12];
|
|
u32 reserved2[4];
|
|
#endif
|
|
} rem_port[PMECC_MAX_SECTOR_NUM];
|
|
u32 reserved3[16]; /* 0x440-0x47C Reserved */
|
|
};
|
|
|
|
/* For PMECC Configuration Register */
|
|
#define PMECC_CFG_BCH_ERR2 (0 << 0)
|
|
#define PMECC_CFG_BCH_ERR4 (1 << 0)
|
|
#define PMECC_CFG_BCH_ERR8 (2 << 0)
|
|
#define PMECC_CFG_BCH_ERR12 (3 << 0)
|
|
#define PMECC_CFG_BCH_ERR24 (4 << 0)
|
|
#define PMECC_CFG_BCH_ERR32 (5 << 0)
|
|
|
|
#define PMECC_CFG_SECTOR512 (0 << 4)
|
|
#define PMECC_CFG_SECTOR1024 (1 << 4)
|
|
|
|
#define PMECC_CFG_PAGE_1SECTOR (0 << 8)
|
|
#define PMECC_CFG_PAGE_2SECTORS (1 << 8)
|
|
#define PMECC_CFG_PAGE_4SECTORS (2 << 8)
|
|
#define PMECC_CFG_PAGE_8SECTORS (3 << 8)
|
|
|
|
#define PMECC_CFG_READ_OP (0 << 12)
|
|
#define PMECC_CFG_WRITE_OP (1 << 12)
|
|
|
|
#define PMECC_CFG_SPARE_ENABLE (1 << 16)
|
|
#define PMECC_CFG_SPARE_DISABLE (0 << 16)
|
|
|
|
#define PMECC_CFG_AUTO_ENABLE (1 << 20)
|
|
#define PMECC_CFG_AUTO_DISABLE (0 << 20)
|
|
|
|
/* For PMECC Clock Control Register */
|
|
#define PMECC_CLK_133MHZ (2 << 0)
|
|
|
|
/* For PMECC Control Register */
|
|
#define PMECC_CTRL_RST (1 << 0)
|
|
#define PMECC_CTRL_DATA (1 << 1)
|
|
#define PMECC_CTRL_USER (1 << 2)
|
|
#define PMECC_CTRL_ENABLE (1 << 4)
|
|
#define PMECC_CTRL_DISABLE (1 << 5)
|
|
|
|
/* For PMECC Status Register */
|
|
#define PMECC_SR_BUSY (1 << 0)
|
|
#define PMECC_SR_ENABLE (1 << 4)
|
|
|
|
/* PMERRLOC Register Definitions */
|
|
struct pmecc_errloc_regs {
|
|
u32 elcfg; /* 0x00 Error Location Configuration Register */
|
|
u32 elprim; /* 0x04 Error Location Primitive Register */
|
|
u32 elen; /* 0x08 Error Location Enable Register */
|
|
u32 eldis; /* 0x0C Error Location Disable Register */
|
|
u32 elsr; /* 0x10 Error Location Status Register */
|
|
u32 elier; /* 0x14 Error Location Interrupt Enable Register */
|
|
u32 elidr; /* 0x08 Error Location Interrupt Disable Register */
|
|
u32 elimr; /* 0x0C Error Location Interrupt Mask Register */
|
|
u32 elisr; /* 0x20 Error Location Interrupt Status Register */
|
|
u32 reserved0; /* 0x24 Reserved */
|
|
#ifdef CONFIG_SAMA5D2
|
|
u32 sigma[33]; /* 0x28-0xA8 Error Location Sigma Registers */
|
|
u32 el[32]; /* 0xAC-0x128 Error Location Registers */
|
|
|
|
/*
|
|
* 0x12C-0x1FC:
|
|
* Reserved for SAMA5D2.
|
|
*/
|
|
u32 reserved1[53];
|
|
#else
|
|
u32 sigma[25]; /* 0x28-0x88 Error Location Sigma Registers */
|
|
u32 el[24]; /* 0x8C-0xE8 Error Location Registers */
|
|
u32 reserved1[5]; /* 0xEC-0xFC Reserved */
|
|
#endif
|
|
|
|
/*
|
|
* SAMA5 chip HSMC registers start here. But for 9X5 chip it is just
|
|
* reserved.
|
|
*
|
|
* Offset 0x00-0xF8:
|
|
*/
|
|
u32 reserved2[63];
|
|
|
|
/*
|
|
* Offset 0xFC:
|
|
* PMECC version for AT91SAM9X5, AT91SAM9N12.
|
|
* HSMC version for SAMA5D3, SAMA5D4. Can refer as PMECC version.
|
|
*/
|
|
u32 version;
|
|
};
|
|
|
|
/* For Error Location Configuration Register */
|
|
#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0)
|
|
#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0)
|
|
#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16)
|
|
|
|
/* For Error Location Disable Register */
|
|
#define PMERRLOC_DISABLE (1 << 0)
|
|
|
|
/* For Error Location Interrupt Status Register */
|
|
#ifdef CONFIG_SAMA5D2
|
|
#define PMERRLOC_ERR_NUM_MASK (0x3f << 8)
|
|
#else
|
|
#define PMERRLOC_ERR_NUM_MASK (0x1f << 8)
|
|
#endif
|
|
|
|
#define PMERRLOC_CALC_DONE (1 << 0)
|
|
|
|
/* PMECC IP version */
|
|
#define PMECC_VERSION_SAMA5D2 0x210
|
|
#define PMECC_VERSION_SAMA5D4 0x113
|
|
#define PMECC_VERSION_SAMA5D3 0x112
|
|
#define PMECC_VERSION_AT91SAM9N12 0x102
|
|
#define PMECC_VERSION_AT91SAM9X5 0x101
|
|
|
|
/* Galois field dimension */
|
|
#define PMECC_GF_DIMENSION_13 13
|
|
#define PMECC_GF_DIMENSION_14 14
|
|
|
|
/* Primitive Polynomial used by PMECC */
|
|
#define PMECC_GF_13_PRIMITIVE_POLY 0x201b
|
|
#define PMECC_GF_14_PRIMITIVE_POLY 0x4443
|
|
|
|
#define PMECC_INDEX_TABLE_SIZE_512 0x2000
|
|
#define PMECC_INDEX_TABLE_SIZE_1024 0x4000
|
|
|
|
#define PMECC_MAX_TIMEOUT_US (100 * 1000)
|
|
|
|
/* Reserved bytes in oob area */
|
|
#define PMECC_OOB_RESERVED_BYTES 2
|
|
|
|
#endif
|