mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
181bd9dc61
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
125 lines
3.3 KiB
C
125 lines
3.3 KiB
C
/*
|
|
* (C) Copyright 2008-2010
|
|
* Gražvydas Ignotas <notasas@gmail.com>
|
|
*
|
|
* Configuration settings for the OMAP3 Pandora.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
|
#define CONFIG_NAND
|
|
|
|
/* override base for compatibility with MLO the device ships with */
|
|
#define CONFIG_SYS_TEXT_BASE 0x80008000
|
|
|
|
#include <configs/ti_omap3_common.h>
|
|
|
|
/*
|
|
* Display CPU and Board information
|
|
*/
|
|
#define CONFIG_DISPLAY_CPUINFO 1
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_REVISION_TAG 1
|
|
|
|
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
|
|
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
|
|
#define CONFIG_SYS_DEVICE_NULLDEV 1
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/* I2C Support */
|
|
#define CONFIG_SYS_I2C_OMAP34XX
|
|
|
|
/* TWL4030 LED */
|
|
#define CONFIG_TWL4030_LED
|
|
|
|
/* Initialize GPIOs by default */
|
|
#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO Bank 4 */
|
|
#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#undef CONFIG_OMAP_SERIAL
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
|
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
|
|
#define CONFIG_SERIAL3 3
|
|
|
|
/* commands to include */
|
|
#define CONFIG_CMD_CACHE /* Cache control */
|
|
|
|
/*
|
|
* Board NAND Info.
|
|
*/
|
|
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
|
|
/* to access nand */
|
|
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_CMD_UBI /* UBI-formated MTD partition support */
|
|
#define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */
|
|
|
|
#define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */
|
|
#define CONFIG_LZO /* required by CONFIG_CMD_UBIFS */
|
|
|
|
#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
|
|
|
|
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader),"\
|
|
"1920k(uboot),128k(uboot-env),"\
|
|
"10m(boot),-(rootfs)"
|
|
#else
|
|
#define MTDPARTS_DEFAULT
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
"usbtty=cdc_acm\0" \
|
|
"bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
|
|
"rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
|
|
"ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
|
|
"source ${loadaddr}; " \
|
|
"fi; " \
|
|
"ubi part boot && ubifsmount ubi:boot && " \
|
|
"ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
|
|
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
|
|
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
|
0x01F00000) /* 31MB */
|
|
|
|
#if defined(CONFIG_NAND)
|
|
#define CONFIG_SYS_FLASH_BASE NAND_BASE
|
|
#endif
|
|
|
|
/* Monitor at start of flash */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
|
|
#define CONFIG_ENV_IS_IN_NAND 1
|
|
#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
|
|
|
|
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
|
|
#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
|
|
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 64
|
|
|
|
#endif /* __CONFIG_H */
|