mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
e4aa8edb6e
Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
289 lines
7.9 KiB
C
289 lines
7.9 KiB
C
/*
|
|
* (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
|
|
*
|
|
* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* Configuration for the woodburn board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __WOODBURN_COMMON_CONFIG_H
|
|
#define __WOODBURN_COMMON_CONFIG_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_MX35
|
|
#define CONFIG_MX35_HCLK_FREQ 24000000
|
|
#define CONFIG_SYS_FSL_CLK
|
|
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
|
|
/* Only in case the value is not present in mach-types.h */
|
|
#ifndef MACH_TYPE_FLEA3
|
|
#define MACH_TYPE_FLEA3 3668
|
|
#endif
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
|
|
|
|
/* This is required to setup the ESDC controller */
|
|
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_REVISION_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_SPD_BUS_NUM 0
|
|
#define CONFIG_MXC_SPI
|
|
#define CONFIG_MXC_GPIO
|
|
|
|
/* PMIC Controller */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_FSL
|
|
#define CONFIG_POWER_FSL_MC13892
|
|
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
|
|
#define CONFIG_RTC_MC13XXX
|
|
|
|
|
|
/* mmc driver */
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_FSL_ESDHC
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
|
/*
|
|
* UART (console)
|
|
*/
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/*
|
|
* Command definition
|
|
*/
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_DNS
|
|
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_CACHE
|
|
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_MII
|
|
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_EFI_PARTITION
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
|
|
#define CONFIG_MXC_GPIO
|
|
|
|
#define CONFIG_NET_RETRY_COUNT 100
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
|
|
|
|
|
|
/*
|
|
* Ethernet on SOC (FEC)
|
|
*/
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE FEC_BASE_ADDR
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_MICREL
|
|
#define CONFIG_FEC_MXC_PHYADDR 0x1
|
|
|
|
#define CONFIG_MII
|
|
#define CONFIG_DISCOVER_PHY
|
|
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
|
|
|
|
#define CONFIG_AUTO_COMPLETE
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x10000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/*
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
|
|
|
|
/*
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
|
#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (LOW_LEVEL_SRAM_STACK - \
|
|
IRAM_BASE_ADDR - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR (IRAM_BASE_ADDR + \
|
|
CONFIG_SYS_GBL_DATA_OFFSET)
|
|
|
|
/*
|
|
* MTD Command for mtdparts
|
|
*/
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \
|
|
"32m(rootfb)," \
|
|
"64m(pcache)," \
|
|
"64m(app1)," \
|
|
"10m(app2),-(spool);" \
|
|
"physmap-flash.0:512k(u-boot),64k(env1)," \
|
|
"64k(env2),3776k(kernel1),3776k(kernel2)"
|
|
|
|
/*
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
|
/* Monitor at beginning of flash */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
|
|
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
|
|
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
|
|
CONFIG_SYS_MONITOR_LEN)
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
|
|
/*
|
|
* CFI FLASH driver setup
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
|
|
/* A non-standard buffered write algorithm */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */
|
|
#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
|
|
|
|
/*
|
|
* NAND FLASH driver setup
|
|
*/
|
|
#define CONFIG_NAND_MXC
|
|
#define CONFIG_NAND_MXC_V1_1
|
|
#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
|
|
#define CONFIG_MXC_NAND_HWECC
|
|
#define CONFIG_SYS_NAND_LARGEPAGE
|
|
|
|
#if 0
|
|
#define CONFIG_MTD_DEBUG
|
|
#define CONFIG_MTD_DEBUG_VERBOSE 7
|
|
#endif
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
/*
|
|
* Default environment and default scripts
|
|
* to update uboot and load kernel
|
|
*/
|
|
|
|
#define CONFIG_HOSTNAME woodburn
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip_sta=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
|
|
"addip=if test -n ${ipdyn};then run addip_dyn;" \
|
|
"else run addip_sta;fi\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"addtty=setenv bootargs ${bootargs}" \
|
|
" console=ttymxc0,${baudrate}\0" \
|
|
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
|
|
"loadaddr=80800000\0" \
|
|
"kernel_addr_r=80800000\0" \
|
|
"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
|
|
"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
|
|
"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
|
|
"flash_self=run ramargs addip addtty addmtd addmisc;" \
|
|
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
|
"run nfsargs addip addtty addmtd addmisc;" \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
|
|
"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
|
|
"net_self=if run net_self_load;then " \
|
|
"run ramargs addip addtty addmtd addmisc;" \
|
|
"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
|
|
"else echo Images not loades;fi\0" \
|
|
"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
|
|
"load=tftp ${loadaddr} ${u-boot}\0" \
|
|
"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
|
|
"update=protect off ${uboot_addr} +80000;" \
|
|
"erase ${uboot_addr} +80000;" \
|
|
"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
|
|
"upd=if run load;then echo Updating u-boot;if run update;" \
|
|
"then echo U-Boot updated;" \
|
|
"else echo Error updating u-boot !;" \
|
|
"echo Board without bootloader !!;" \
|
|
"fi;" \
|
|
"else echo U-Boot not downloaded..exiting;fi\0" \
|
|
"bootcmd=run net_nfs\0"
|
|
|
|
#endif /* __CONFIG_H */
|