Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-19 03:08:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/samsung/universal_c210/universal.c
Piotr Wilczek d984b9f89c exynos4: universal_C210: add display support 
This patch add support for display on Universal C210 board.
Width of displyed logo must be not bigger than 480 pixel and
is limited by width of the screen.
Tizen logo size is 520x120 pixels and should be resized.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-11-15 21:08:20 +09:00

503 lines
11 KiB
C
Raw Blame History

/*
* Copyright (C) 2010 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Kyungmin Park <kyungmin.park@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <spi.h>
#include <lcd.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/adc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
#include <pmic.h>
#include <usb/s3c_udc.h>
#include <asm/arch/cpu.h>
#include <max8998_pmic.h>
#include <asm/arch/watchdog.h>
#include <libtizen.h>
#include <ld9040.h>
DECLARE_GLOBAL_DATA_PTR;
struct exynos4_gpio_part1 *gpio1;
struct exynos4_gpio_part2 *gpio2;
unsigned int board_rev;
u32 get_board_rev(void)
{
return board_rev;
}
static int get_hwrev(void)
{
return board_rev & 0xFF;
}
static void check_hw_revision(void);
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
static unsigned short get_adc_value(int channel)
{
struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
unsigned short ret = 0;
unsigned int reg;
unsigned int loop = 0;
writel(channel & 0xF, &adc->adcmux);
writel((1 << 14) | (49 << 6), &adc->adccon);
writel(1000 & 0xffff, &adc->adcdly);
writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
udelay(10);
writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
udelay(10);
do {
udelay(1);
reg = readl(&adc->adccon);
} while (!(reg & (1 << 15)) && (loop++ < 1000));
ret = readl(&adc->adcdat0) & 0xFFF;
return ret;
}
static int adc_power_control(int on)
{
int ret;
struct pmic *p = get_pmic();
if (pmic_probe(p))
return -1;
ret = pmic_set_output(p,
MAX8998_REG_ONOFF1,
MAX8998_LDO4, !!on);
return ret;
}
static unsigned int get_hw_revision(void)
{
int hwrev, mode0, mode1;
adc_power_control(1);
mode0 = get_adc_value(1); /* HWREV_MODE0 */
mode1 = get_adc_value(2); /* HWREV_MODE1 */
/*
* XXX Always set the default hwrev as the latest board
* ADC = (voltage) / 3.3 * 4096
*/
hwrev = 3;
#define IS_RANGE(x, min, max) ((x) > (min) && (x) < (max))
if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200))
hwrev = 0x0; /* 0.01V 0.01V */
if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200))
hwrev = 0x1; /* 610mV 0.01V */
if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200))
hwrev = 0x2; /* 1.16V 0.01V */
if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200))
hwrev = 0x3; /* 1.79V 0.01V */
#undef IS_RANGE
debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
adc_power_control(0);
return hwrev;
}
static void check_hw_revision(void)
{
int hwrev;
hwrev = get_hw_revision();
board_rev |= hwrev;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
puts("Board:\tUniversal C210\n");
return 0;
}
#endif
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
int err;
switch (get_hwrev()) {
case 0:
/*
* Set the low to enable LDO_EN
* But when you use the test board for eMMC booting
* you should set it HIGH since it removes the inverter
*/
/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
s5p_gpio_direction_output(&gpio1->e3, 6, 0);
break;
default:
/*
* Default reset state is High and there's no inverter
* But set it as HIGH to ensure
*/
/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
s5p_gpio_direction_output(&gpio1->e1, 3, 1);
break;
}
/*
* MMC device init
* mmc0 : eMMC (8-bit buswidth)
* mmc2 : SD card (4-bit buswidth)
*/
err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
if (err)
debug("SDMMC0 not configured\n");
else
err = s5p_mmc_init(0, 8);
/* T-flash detect */
s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
/*
* Check the T-flash detect pin
* GPX3[4] T-flash detect pin
*/
if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
if (err)
debug("SDMMC2 not configured\n");
else
err = s5p_mmc_init(2, 4);
}
return err;
}
#endif
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
int ret = 0;
struct pmic *p = get_pmic();
if (pmic_probe(p))
return -1;
if (on) {
ret |= pmic_set_output(p,
MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
MAX8998_SAFEOUT1, LDO_ON);
ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
MAX8998_LDO3, LDO_ON);
ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
MAX8998_LDO8, LDO_ON);
} else {
ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
MAX8998_LDO8, LDO_OFF);
ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
MAX8998_LDO3, LDO_OFF);
ret |= pmic_set_output(p,
MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
MAX8998_SAFEOUT1, LDO_OFF);
}
if (ret) {
puts("MAX8998 LDO setting error!\n");
return -1;
}
return 0;
}
struct s3c_plat_otg_data s5pc210_otg_data = {
.phy_control = s5pc210_phy_control,
.regs_phy = EXYNOS4_USBPHY_BASE,
.regs_otg = EXYNOS4_USBOTG_BASE,
.usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
.usb_flags = PHY0_SLEEP,
};
#endif
int board_early_init_f(void)
{
wdt_stop();
return 0;
}
#ifdef CONFIG_SOFT_SPI
static void soft_spi_init(void)
{
gpio_direction_output(CONFIG_SOFT_SPI_GPIO_SCLK,
CONFIG_SOFT_SPI_MODE & SPI_CPOL);
gpio_direction_output(CONFIG_SOFT_SPI_GPIO_MOSI, 1);
gpio_direction_input(CONFIG_SOFT_SPI_GPIO_MISO);
gpio_direction_output(CONFIG_SOFT_SPI_GPIO_CS,
!(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH));
}
void spi_cs_activate(struct spi_slave *slave)
{
gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS,
!(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH));
SPI_SCL(1);
gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS,
CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS,
!(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH));
}
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void universal_spi_scl(int bit)
{
gpio_set_value(CONFIG_SOFT_SPI_GPIO_SCLK, bit);
}
void universal_spi_sda(int bit)
{
gpio_set_value(CONFIG_SOFT_SPI_GPIO_MOSI, bit);
}
int universal_spi_read(void)
{
return gpio_get_value(CONFIG_SOFT_SPI_GPIO_MISO);
}
#endif
static void init_pmic_lcd(void)
{
unsigned char val;
int ret = 0;
struct pmic *p = get_pmic();
if (pmic_probe(p))
return;
/* LDO7 1.8V */
val = 0x02; /* (1800 - 1600) / 100; */
ret |= pmic_reg_write(p, MAX8998_REG_LDO7, val);
/* LDO17 3.0V */
val = 0xe; /* (3000 - 1600) / 100; */
ret |= pmic_reg_write(p, MAX8998_REG_LDO17, val);
/* Disable unneeded regulators */
/*
* ONOFF1
* Buck1 ON, Buck2 OFF, Buck3 ON, Buck4 ON
* LDO2 ON, LDO3 OFF, LDO4 OFF, LDO5 ON
*/
val = 0xB9;
ret |= pmic_reg_write(p, MAX8998_REG_ONOFF1, val);
/* ONOFF2
* LDO6 OFF, LDO7 ON, LDO8 OFF, LDO9 ON,
* LDO10 OFF, LDO11 OFF, LDO12 OFF, LDO13 OFF
*/
val = 0x50;
ret |= pmic_reg_write(p, MAX8998_REG_ONOFF2, val);
/* ONOFF3
* LDO14 OFF, LDO15 OFF, LGO16 OFF, LDO17 OFF
* EPWRHOLD OFF, EBATTMON OFF, ELBCNFG2 OFF, ELBCNFG1 OFF
*/
val = 0x00;
ret |= pmic_reg_write(p, MAX8998_REG_ONOFF3, val);
if (ret)
puts("LCD pmic initialisation error!\n");
}
static void lcd_cfg_gpio(void)
{
unsigned int i, f3_end = 4;
for (i = 0; i < 8; i++) {
/* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */
s5p_gpio_cfg_pin(&gpio1->f0, i, GPIO_FUNC(2));
s5p_gpio_cfg_pin(&gpio1->f1, i, GPIO_FUNC(2));
s5p_gpio_cfg_pin(&gpio1->f2, i, GPIO_FUNC(2));
/* pull-up/down disable */
s5p_gpio_set_pull(&gpio1->f0, i, GPIO_PULL_NONE);
s5p_gpio_set_pull(&gpio1->f1, i, GPIO_PULL_NONE);
s5p_gpio_set_pull(&gpio1->f2, i, GPIO_PULL_NONE);
/* drive strength to max (24bit) */
s5p_gpio_set_drv(&gpio1->f0, i, GPIO_DRV_4X);
s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
s5p_gpio_set_drv(&gpio1->f1, i, GPIO_DRV_4X);
s5p_gpio_set_rate(&gpio1->f1, i, GPIO_DRV_SLOW);
s5p_gpio_set_drv(&gpio1->f2, i, GPIO_DRV_4X);
s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
}
for (i = 0; i < f3_end; i++) {
/* set GPF3[0:3] for RGB Interface and Data lines (32bit) */
s5p_gpio_cfg_pin(&gpio1->f3, i, GPIO_FUNC(2));
/* pull-up/down disable */
s5p_gpio_set_pull(&gpio1->f3, i, GPIO_PULL_NONE);
/* drive strength to max (24bit) */
s5p_gpio_set_drv(&gpio1->f3, i, GPIO_DRV_4X);
s5p_gpio_set_rate(&gpio1->f3, i, GPIO_DRV_SLOW);
}
/* gpio pad configuration for LCD reset. */
s5p_gpio_cfg_pin(&gpio2->y4, 5, GPIO_OUTPUT);
spi_init();
}
static void reset_lcd(void)
{
s5p_gpio_set_value(&gpio2->y4, 5, 1);
udelay(10000);
s5p_gpio_set_value(&gpio2->y4, 5, 0);
udelay(10000);
s5p_gpio_set_value(&gpio2->y4, 5, 1);
udelay(100);
}
static void lcd_power_on(void)
{
struct pmic *p = get_pmic();
if (pmic_probe(p))
return;
pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON);
pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON);
}
vidinfo_t panel_info = {
.vl_freq = 60,
.vl_col = 480,
.vl_row = 800,
.vl_width = 480,
.vl_height = 800,
.vl_clkp = CONFIG_SYS_HIGH,
.vl_hsp = CONFIG_SYS_HIGH,
.vl_vsp = CONFIG_SYS_HIGH,
.vl_dp = CONFIG_SYS_HIGH,
.vl_bpix = 5, /* Bits per pixel */
/* LD9040 LCD Panel */
.vl_hspw = 2,
.vl_hbpd = 16,
.vl_hfpd = 16,
.vl_vspw = 2,
.vl_vbpd = 8,
.vl_vfpd = 8,
.vl_cmd_allow_len = 0xf,
.win_id = 0,
.cfg_gpio = lcd_cfg_gpio,
.backlight_on = NULL,
.lcd_power_on = lcd_power_on,
.reset_lcd = reset_lcd,
.dual_lcd_enabled = 0,
.init_delay = 0,
.power_on_delay = 10000,
.reset_delay = 10000,
.interface_mode = FIMD_RGB_INTERFACE,
.mipi_enabled = 0,
};
void init_panel_info(vidinfo_t *vid)
{
vid->logo_on = 1;
vid->resolution = HD_RESOLUTION;
vid->rgb_mode = MODE_RGB_P;
#ifdef CONFIG_TIZEN
get_tizen_logo_info(vid);
#endif
/* for LD9040. */
vid->pclk_name = 1; /* MPLL */
vid->sclk_div = 1;
vid->cfg_ldo = ld9040_cfg_ldo;
vid->enable_ldo = ld9040_enable_ldo;
setenv("lcdinfo", "lcd=ld9040");
}
int board_init(void)
{
gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
#if defined(CONFIG_PMIC)
pmic_init();
init_pmic_lcd();
#endif
#ifdef CONFIG_SOFT_SPI
soft_spi_init();
#endif
check_hw_revision();
printf("HW Revision:\t0x%x\n", board_rev);
return 0;
}
Reference in a new issue View git blame Copy permalink