u-boot/arch/arm
Patrice Chotard d983a0f008 ARM: DTS: stm32: add stm32h743i-disco files
All these files are imported from linux kernel v4.13

Add device tree support for STM32H743 SoC and discovery
board. This board offers :
  _ STM32H743XIH6 microcontroller with 2 Mbytes of
    Flash memory and 1 Mbyte of RAM in TFBGA240+25 package
  _ 5.7” 640x480 TFT color LCD with touch screen
  _ Ethernet compliant with IEEE-802.3-2002
  _ USB OTG HS
  _ I2 C compatible serial interface
  _ ST-MEMS digital microphones
  _ 8-Gbyte (or more) SDIO3.0 interface microSD™ card
  _ 8Mx32bit SDRAM
  _ 1-Gbit Twin Quad-SPI NOR Flash
  _ Reset, wakeup, or key buttons
  _ Joystick with 4-direction control and selector
  _ Board connectors :
	1 USB with Micro-AB
	Ethernet RJ45
	Stereo headset jack including analog microphone input
	microSD™ card
	RCA connector
	JTAG/SWD and ETM trace
   _ Expansion connectors:
	Arduino Uno compatible Connectors
	2 x PIO connectors (PMOD and PMOD+)
   _ On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration
     capability: mass storage, virtual COM port and debug port

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-22 07:40:02 -04:00
..
cpu blk: Remove various places that do flush cache after read 2017-09-15 08:05:10 -04:00
dts ARM: DTS: stm32: add stm32h743i-disco files 2017-09-22 07:40:02 -04:00
include usb: dwc3: Add dwc3 glue driver support for STi 2017-09-22 07:39:59 -04:00
lib env: Rename getenv/_f() to env_get() 2017-08-16 08:30:24 -04:00
mach-aspeed aspeed: Refactor SCU to use consistent mask & shift 2017-05-08 11:57:35 -04:00
mach-at91 ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support 2017-09-14 16:02:47 -04:00
mach-bcm283x bcm2835_wdt: support for the BCM2835/2836 watchdog 2017-05-09 20:30:08 -04:00
mach-davinci ARM: davinci: Remove CONFIG_SOC_DA830 2017-09-15 12:35:48 -04:00
mach-exynos usb: net: migrate USB Ethernet adapters to Kconfig 2017-09-08 10:23:00 -04:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-imx toradex: imx6: Move g_dnl_bind_fixup() into common SPL code 2017-09-20 15:34:59 +02:00
mach-integrator env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
mach-keystone env: Rename getenv/_f() to env_get() 2017-08-16 08:30:24 -04:00
mach-kirkwood env: Rename getenv/_f() to env_get() 2017-08-16 08:30:24 -04:00
mach-meson meson-gx: reserved memory regions 2017-07-22 15:36:18 -04:00
mach-mvebu env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
mach-omap2 arm: mach-omap2: Relax checks on OP-TEE location to allow pageable image 2017-09-15 09:03:16 -04:00
mach-orion5x spl: add hierarchical defaults for SPL_LDSCRIPT 2017-08-13 17:12:37 +02:00
mach-rmobile ARM: rmobile: Add missing IPSR18 bits to R8A7795 PFC 2017-09-05 07:51:39 +09:00
mach-rockchip rockchip: ram: rk3399: update reg map for of-platdata 2017-09-18 20:40:38 +02:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
mach-socfpga env: Rename setenv() to env_set() 2017-08-16 08:22:18 -04:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 spl: stm32: make falcon mode activation configurable 2017-08-26 14:56:13 -04:00
mach-sunxi sunxi: Enable MMC new mode for A83T 2017-08-28 22:36:48 +05:30
mach-tegra dm: core: Add ofnode_for_each_subnode() 2017-09-11 21:43:58 -06:00
mach-uniphier ARM: uniphier: add GPU(Mali) reset deassert and clk enable 2017-09-18 20:26:18 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq spl: add hierarchical defaults for SPL_LDSCRIPT 2017-08-13 17:12:37 +02:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk arm: Always keep the dtb section on objcopy 2017-06-05 14:13:11 -04:00
Kconfig armv8: ls1088aqds: Add support of LS1088AQDS 2017-09-11 08:01:05 -07:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00