mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 15:53:02 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
476 lines
12 KiB
C
476 lines
12 KiB
C
/*
|
|
* (C) Copyright 2000, 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
|
|
* Add support the Sharp chips on the mpc8260ads.
|
|
* I started with board/ip860/flash.c and made changes I found in
|
|
* the MTD project by David Schleef.
|
|
*
|
|
* (C) Copyright 2003 Arabella Software Ltd.
|
|
* Yuli Barcohen <yuli@arabellasw.com>
|
|
* Re-written to support multi-bank flash SIMMs.
|
|
* Added support for real protection and JFFS2.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
/* Intel-compatible flash ID */
|
|
#define INTEL_COMPAT 0x89898989
|
|
#define INTEL_ALT 0xB0B0B0B0
|
|
|
|
/* Intel-compatible flash commands */
|
|
#define INTEL_PROGRAM 0x10101010
|
|
#define INTEL_ERASE 0x20202020
|
|
#define INTEL_CLEAR 0x50505050
|
|
#define INTEL_LOCKBIT 0x60606060
|
|
#define INTEL_PROTECT 0x01010101
|
|
#define INTEL_STATUS 0x70707070
|
|
#define INTEL_READID 0x90909090
|
|
#define INTEL_CONFIRM 0xD0D0D0D0
|
|
#define INTEL_RESET 0xFFFFFFFF
|
|
|
|
/* Intel-compatible flash status bits */
|
|
#define INTEL_FINISHED 0x80808080
|
|
#define INTEL_OK 0x80808080
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* This board supports 32-bit wide flash SIMMs (4x8-bit configuration.)
|
|
* Up to 32MB of flash supported (up to 4 banks.)
|
|
* BCSR is used for flash presence detect (page 4-65 of the User's Manual)
|
|
*
|
|
* The following code can not run from flash!
|
|
*/
|
|
unsigned long flash_init (void)
|
|
{
|
|
ulong size = 0, sect_start, sect_size = 0, bank_size;
|
|
ushort sect_count = 0;
|
|
int i, j, nbanks;
|
|
vu_long *addr = (vu_long *)CONFIG_SYS_FLASH_BASE;
|
|
vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
|
|
|
|
switch (bcsr[2] & 0xF) {
|
|
case 0:
|
|
nbanks = 4;
|
|
break;
|
|
case 1:
|
|
nbanks = 2;
|
|
break;
|
|
case 2:
|
|
nbanks = 1;
|
|
break;
|
|
default: /* Unsupported configurations */
|
|
nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
|
|
}
|
|
|
|
if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS)
|
|
nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
|
|
|
|
for (i = 0; i < nbanks; i++) {
|
|
*addr = INTEL_READID; /* Read Intelligent Identifier */
|
|
if ((addr[0] == INTEL_COMPAT) || (addr[0] == INTEL_ALT)) {
|
|
switch (addr[1]) {
|
|
case SHARP_ID_28F016SCL:
|
|
case SHARP_ID_28F016SCZ:
|
|
flash_info[i].flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
|
|
sect_count = 32;
|
|
sect_size = 0x40000;
|
|
break;
|
|
default:
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
sect_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
sect_size =
|
|
CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS / CONFIG_SYS_MAX_FLASH_SECT;
|
|
}
|
|
}
|
|
else
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
|
|
printf("### Unknown flash ID %08lX %08lX at address %08lX ###\n",
|
|
addr[0], addr[1], (ulong)addr);
|
|
size = 0;
|
|
*addr = INTEL_RESET; /* Reset bank to Read Array mode */
|
|
break;
|
|
}
|
|
flash_info[i].sector_count = sect_count;
|
|
flash_info[i].size = bank_size = sect_size * sect_count;
|
|
size += bank_size;
|
|
sect_start = (ulong)addr;
|
|
for (j = 0; j < sect_count; j++) {
|
|
addr = (vu_long *)sect_start;
|
|
flash_info[i].start[j] = sect_start;
|
|
flash_info[i].protect[j] = (addr[2] == 0x01010101);
|
|
sect_start += sect_size;
|
|
}
|
|
*addr = INTEL_RESET; /* Reset bank to Read Array mode */
|
|
addr = (vu_long *)sect_start;
|
|
}
|
|
|
|
if (size == 0) { /* Unknown flash, fill with hard-coded values */
|
|
sect_start = CONFIG_SYS_FLASH_BASE;
|
|
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
flash_info[i].size = CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS;
|
|
flash_info[i].sector_count = sect_count;
|
|
for (j = 0; j < sect_count; j++) {
|
|
flash_info[i].start[j] = sect_start;
|
|
flash_info[i].protect[j] = 0;
|
|
sect_start += sect_size;
|
|
}
|
|
}
|
|
size = CONFIG_SYS_FLASH_SIZE;
|
|
}
|
|
else
|
|
for (i = nbanks; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
flash_info[i].size = 0;
|
|
flash_info[i].sector_count = 0;
|
|
}
|
|
|
|
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
|
|
/* monitor protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
|
|
&flash_info[0]);
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
/* ENV protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
|
|
&flash_info[0]);
|
|
#endif
|
|
return (size);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info (flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_INTEL: printf ("Intel "); break;
|
|
case FLASH_MAN_SHARP: printf ("Sharp "); break;
|
|
default: printf ("Unknown Vendor "); break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n");
|
|
break;
|
|
case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
|
|
break;
|
|
case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
|
|
break;
|
|
case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
|
|
break;
|
|
default: printf ("Unknown Chip Type\n");
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i=0; i<info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf ("\n ");
|
|
printf (" %08lX%s",
|
|
info->start[i],
|
|
info->protect[i] ? " (RO)" : " "
|
|
);
|
|
}
|
|
printf ("\n");
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
int flash_erase (flash_info_t *info, int s_first, int s_last)
|
|
{
|
|
int flag, prot, sect;
|
|
ulong start, now, last;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("- missing\n");
|
|
} else {
|
|
printf ("- no sectors to erase\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
|
|
&& ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
|
|
printf ("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect=s_first; sect<=s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
} else {
|
|
printf ("\n");
|
|
}
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect<=s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
vu_long *addr = (vu_long *)(info->start[sect]);
|
|
|
|
last = start = get_timer (0);
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
/* Clear Status Register */
|
|
*addr = INTEL_CLEAR;
|
|
/* Single Block Erase Command */
|
|
*addr = INTEL_ERASE;
|
|
/* Confirm */
|
|
*addr = INTEL_CONFIRM;
|
|
|
|
if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
|
|
/* Resume Command, as per errata update */
|
|
*addr = INTEL_CONFIRM;
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
|
|
if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout\n");
|
|
*addr = INTEL_RESET; /* reset bank */
|
|
return 1;
|
|
}
|
|
/* show that we're waiting */
|
|
if ((now - last) > 1000) { /* every second */
|
|
putc ('.');
|
|
last = now;
|
|
}
|
|
}
|
|
|
|
if (*addr != INTEL_OK) {
|
|
printf("Block erase failed at %08X, CSR=%08X\n",
|
|
(uint)addr, (uint)*addr);
|
|
*addr = INTEL_RESET; /* reset bank */
|
|
return 1;
|
|
}
|
|
|
|
/* reset to read mode */
|
|
*addr = INTEL_RESET;
|
|
}
|
|
}
|
|
|
|
printf (" done\n");
|
|
return 0;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_word (flash_info_t *info, ulong dest, ulong data)
|
|
{
|
|
ulong start;
|
|
int rc = 0;
|
|
int flag;
|
|
vu_long *addr = (vu_long *)dest;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*addr & data) != data) {
|
|
return (2);
|
|
}
|
|
|
|
*addr = INTEL_CLEAR; /* Clear status register */
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
/* Write Command */
|
|
*addr = INTEL_PROGRAM;
|
|
|
|
/* Write Data */
|
|
*addr = data;
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
/* data polling for D7 */
|
|
start = get_timer (0);
|
|
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
printf("Write timed out\n");
|
|
rc = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (*addr != INTEL_OK) {
|
|
printf ("Write failed at %08X, CSR=%08X\n", (uint)addr, (uint)*addr);
|
|
rc = 1;
|
|
}
|
|
|
|
*addr = INTEL_RESET; /* Reset to read array mode */
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
|
|
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
|
{
|
|
ulong cp, wp, data;
|
|
int i, l, rc;
|
|
|
|
wp = (addr & ~3); /* get lower word aligned address */
|
|
|
|
*(vu_long *)wp = INTEL_RESET; /* Reset to read array mode */
|
|
|
|
/*
|
|
* handle unaligned start bytes
|
|
*/
|
|
if ((l = addr - wp) != 0) {
|
|
data = 0;
|
|
for (i=0, cp=wp; i<l; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
for (; i<4 && cnt>0; ++i) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
++cp;
|
|
}
|
|
for (; cnt==0 && i<4; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
|
|
if ((rc = write_word(info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += 4;
|
|
}
|
|
|
|
/*
|
|
* handle word aligned part
|
|
*/
|
|
while (cnt >= 4) {
|
|
data = 0;
|
|
for (i=0; i<4; ++i) {
|
|
data = (data << 8) | *src++;
|
|
}
|
|
if ((rc = write_word(info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += 4;
|
|
cnt -= 4;
|
|
}
|
|
|
|
if (cnt == 0) {
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
data = 0;
|
|
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
}
|
|
for (; i<4; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
|
|
rc = write_word(info, wp, data);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Set/Clear sector's lock bit, returns:
|
|
* 0 - OK
|
|
* 1 - Error (timeout, voltage problems, etc.)
|
|
*/
|
|
int flash_real_protect(flash_info_t *info, long sector, int prot)
|
|
{
|
|
ulong start;
|
|
int i;
|
|
int rc = 0;
|
|
vu_long *addr = (vu_long *)(info->start[sector]);
|
|
int flag = disable_interrupts();
|
|
|
|
*addr = INTEL_CLEAR; /* Clear status register */
|
|
if (prot) { /* Set sector lock bit */
|
|
*addr = INTEL_LOCKBIT; /* Sector lock bit */
|
|
*addr = INTEL_PROTECT; /* set */
|
|
}
|
|
else { /* Clear sector lock bit */
|
|
*addr = INTEL_LOCKBIT; /* All sectors lock bits */
|
|
*addr = INTEL_CONFIRM; /* clear */
|
|
}
|
|
|
|
start = get_timer(0);
|
|
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
|
|
printf("Flash lock bit operation timed out\n");
|
|
rc = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (*addr != INTEL_OK) {
|
|
printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
|
|
(uint)addr, (uint)*addr);
|
|
rc = 1;
|
|
}
|
|
|
|
if (!rc)
|
|
info->protect[sector] = prot;
|
|
|
|
/*
|
|
* Clear lock bit command clears all sectors lock bits, so
|
|
* we have to restore lock bits of protected sectors.
|
|
*/
|
|
if (!prot)
|
|
for (i = 0; i < info->sector_count; i++)
|
|
if (info->protect[i]) {
|
|
addr = (vu_long *)(info->start[i]);
|
|
*addr = INTEL_LOCKBIT; /* Sector lock bit */
|
|
*addr = INTEL_PROTECT; /* set */
|
|
udelay(CONFIG_SYS_FLASH_LOCK_TOUT * 1000);
|
|
}
|
|
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
*addr = INTEL_RESET; /* Reset to read array mode */
|
|
|
|
return rc;
|
|
}
|