mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
7390fb9999
Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
1096 lines
22 KiB
Text
1096 lines
22 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
|
* Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
|
|
* Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/gpio-keys.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include "rk3399.dtsi"
|
|
#include "rk3399-opp.dtsi"
|
|
|
|
/ {
|
|
model = "Pine64 Pinebook Pro";
|
|
compatible = "pine64,pinebook-pro", "rockchip,rk3399";
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
backlight: edp-backlight {
|
|
compatible = "pwm-backlight";
|
|
power-supply = <&vcc_12v>;
|
|
pwms = <&pwm0 0 740740 0>;
|
|
};
|
|
|
|
edp_panel: edp-panel {
|
|
compatible = "boe,nv140fhmn49";
|
|
backlight = <&backlight>;
|
|
enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&panel_en_gpio>;
|
|
power-supply = <&vcc3v3_panel>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
panel_in_edp: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&edp_out_panel>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Use separate nodes for gpio-keys to allow for selective deactivation
|
|
* of wakeup sources via sysfs without disabling the whole key
|
|
*/
|
|
gpio-key-lid {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lidbtn_gpio>;
|
|
|
|
lid {
|
|
debounce-interval = <20>;
|
|
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
label = "Lid";
|
|
linux,code = <SW_LID>;
|
|
linux,input-type = <EV_SW>;
|
|
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
gpio-key-power {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwrbtn_gpio>;
|
|
|
|
power {
|
|
debounce-interval = <20>;
|
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
label = "Power";
|
|
linux,code = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
|
|
|
|
green-led {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
default-state = "on";
|
|
function = LED_FUNCTION_POWER;
|
|
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
label = "green:power";
|
|
};
|
|
|
|
red-led {
|
|
color = <LED_COLOR_ID_RED>;
|
|
default-state = "off";
|
|
function = LED_FUNCTION_STANDBY;
|
|
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
label = "red:standby";
|
|
panic-indicator;
|
|
retain-state-suspended;
|
|
};
|
|
};
|
|
|
|
/* Power sequence for SDIO WiFi module */
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk808 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h_gpio>;
|
|
post-power-on-delay-ms = <100>;
|
|
power-off-delay-us = <500000>;
|
|
|
|
/* WL_REG_ON on module */
|
|
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/* Audio components */
|
|
es8316-sound {
|
|
compatible = "simple-audio-card";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_det_gpio>;
|
|
simple-audio-card,name = "rockchip,es8316-codec";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Mic Jack",
|
|
"Headphone", "Headphones",
|
|
"Speaker", "Speaker";
|
|
simple-audio-card,routing =
|
|
"MIC1", "Mic Jack",
|
|
"Headphones", "HPOL",
|
|
"Headphones", "HPOR",
|
|
"Speaker Amplifier INL", "HPOL",
|
|
"Speaker Amplifier INR", "HPOR",
|
|
"Speaker", "Speaker Amplifier OUTL",
|
|
"Speaker", "Speaker Amplifier OUTR";
|
|
|
|
simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
simple-audio-card,aux-devs = <&speaker_amp>;
|
|
simple-audio-card,pin-switches = "Speaker";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s1>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&es8316>;
|
|
};
|
|
};
|
|
|
|
speaker_amp: speaker-amplifier {
|
|
compatible = "simple-audio-amplifier";
|
|
enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
sound-name-prefix = "Speaker Amplifier";
|
|
VCC-supply = <&pa_5v>;
|
|
};
|
|
|
|
/* Power tree */
|
|
/* Root power source */
|
|
vcc_sysin: vcc-sysin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sysin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* Regulators supplied by vcc_sysin */
|
|
/* LCD backlight supply */
|
|
vcc_12v: vcc-12v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_12v";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
vin-supply = <&vcc_sysin>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* Main 3.3 V supply */
|
|
vcc3v3_sys: wifi_bat: vcc3v3-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_sysin>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* 5 V USB power supply */
|
|
vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwr_5v_gpio>;
|
|
regulator-name = "vcc5v0_usb";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_sysin>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* RK3399 logic supply */
|
|
vdd_log: vdd-log {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm2 0 25000 1>;
|
|
regulator-name = "vdd_log";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
vin-supply = <&vcc_sysin>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* Regulators supplied by vcc3v3_sys */
|
|
/* 0.9 V supply, always on */
|
|
vcc_0v9: vcc-0v9 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_0v9";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
};
|
|
|
|
/* S3 1.8 V supply, switched by vcc1v8_s3 */
|
|
vcca1v8_s3: vcc1v8-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcca1v8_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
};
|
|
|
|
/* micro SD card power */
|
|
vcc3v0_sd: vcc3v0-sd {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
|
|
regulator-name = "vcc3v0_sd";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* LCD panel power, called VCC3V3_S0 in schematic */
|
|
vcc3v3_panel: vcc3v3-panel {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcdvcc_en_gpio>;
|
|
regulator-name = "vcc3v3_panel";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <100000>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* M.2 adapter power, switched by vcc1v8_s3 */
|
|
vcc3v3_ssd: vcc3v3-ssd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_ssd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
};
|
|
|
|
/* Regulators supplied by vcc5v0_usb */
|
|
/* USB 3 port power supply regulator */
|
|
vcc5v0_otg: vcc5v0-otg {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_host_en_gpio>;
|
|
regulator-name = "vcc5v0_otg";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* Regulators supplied by vcc5v0_usb */
|
|
/* Type C port power supply regulator */
|
|
vbus_5vout: vbus_typec: vbus-5vout {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
|
|
regulator-name = "vbus_5vout";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* Regulators supplied by vcc_1v8 */
|
|
/* Primary 0.9 V LDO */
|
|
vcca0v9_s3: vcca0v9-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc0v9_s3";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_1v8>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
mains_charger: dc-charger {
|
|
compatible = "gpio-charger";
|
|
charger-type = "mains";
|
|
gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
|
|
|
|
/* Also triggered by USB charger */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dc_det_gpio>;
|
|
};
|
|
};
|
|
|
|
&cdn_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_b>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&vdd_cpu_b>;
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&edp {
|
|
force-hpd;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&edp_hpd>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
edp_out: port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
edp_out_panel: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_in_edp>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&emmc_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <4>;
|
|
i2c-scl-rising-time-ns = <168>;
|
|
status = "okay";
|
|
|
|
rk808: pmic@1b {
|
|
compatible = "rockchip,rk808";
|
|
reg = <0x1b>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "xin32k", "rk808-clkout2";
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l_gpio>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
|
|
vcc1-supply = <&vcc_sysin>;
|
|
vcc2-supply = <&vcc_sysin>;
|
|
vcc3-supply = <&vcc_sysin>;
|
|
vcc4-supply = <&vcc_sysin>;
|
|
vcc6-supply = <&vcc_sysin>;
|
|
vcc7-supply = <&vcc_sysin>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc_sysin>;
|
|
vcc10-supply = <&vcc_sysin>;
|
|
vcc11-supply = <&vcc_sysin>;
|
|
vcc12-supply = <&vcc3v3_sys>;
|
|
vcc13-supply = <&vcc_sysin>;
|
|
vcc14-supply = <&vcc_sysin>;
|
|
|
|
regulators {
|
|
/* rk3399 center logic supply */
|
|
vdd_center: DCDC_REG1 {
|
|
regulator-name = "vdd_center";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_l: DCDC_REG2 {
|
|
regulator-name = "vdd_cpu_l";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: vcc_wl: DCDC_REG4 {
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
/* not used */
|
|
LDO_REG1 {
|
|
};
|
|
|
|
/* not used */
|
|
LDO_REG2 {
|
|
};
|
|
|
|
vcc1v8_pmupll: LDO_REG3 {
|
|
regulator-name = "vcc1v8_pmupll";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_sdio: LDO_REG4 {
|
|
regulator-name = "vcc_sdio";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
vcca3v0_codec: LDO_REG5 {
|
|
regulator-name = "vcca3v0_codec";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v5: LDO_REG6 {
|
|
regulator-name = "vcc_1v5";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1500000>;
|
|
};
|
|
};
|
|
|
|
vcca1v8_codec: LDO_REG7 {
|
|
regulator-name = "vcca1v8_codec";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v0: LDO_REG8 {
|
|
regulator-name = "vcc_3v0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
vcc3v3_s3: SWITCH_REG1 {
|
|
regulator-name = "vcc3v3_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_s0: SWITCH_REG2 {
|
|
regulator-name = "vcc3v3_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vdd_cpu_b: regulator@40 {
|
|
compatible = "silergy,syr827";
|
|
reg = <0x40>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vsel1_gpio>;
|
|
regulator-name = "vdd_cpu_b";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-ramp-delay = <1000>;
|
|
vin-supply = <&vcc_1v8>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: regulator@41 {
|
|
compatible = "silergy,syr828";
|
|
reg = <0x41>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vsel2_gpio>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-ramp-delay = <1000>;
|
|
vin-supply = <&vcc_1v8>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
i2c-scl-falling-time-ns = <4>;
|
|
i2c-scl-rising-time-ns = <168>;
|
|
status = "okay";
|
|
|
|
es8316: es8316@11 {
|
|
compatible = "everest,es8316";
|
|
reg = <0x11>;
|
|
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
|
clock-names = "mclk";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
i2c-scl-falling-time-ns = <15>;
|
|
i2c-scl-rising-time-ns = <450>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
i2c-scl-falling-time-ns = <20>;
|
|
i2c-scl-rising-time-ns = <600>;
|
|
status = "okay";
|
|
|
|
fusb0: fusb30x@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fusb0_int_gpio>;
|
|
vbus-supply = <&vbus_typec>;
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
data-role = "host";
|
|
label = "USB-C";
|
|
op-sink-microwatt = <1000000>;
|
|
power-role = "dual";
|
|
sink-pdos =
|
|
<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
|
|
source-pdos =
|
|
<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
|
|
try-power-role = "sink";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
usbc_hs: endpoint {
|
|
remote-endpoint =
|
|
<&u2phy0_typec_hs>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
usbc_ss: endpoint {
|
|
remote-endpoint =
|
|
<&tcphy0_typec_ss>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
usbc_dp: endpoint {
|
|
remote-endpoint =
|
|
<&tcphy0_typec_dp>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s1 {
|
|
#sound-dai-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
|
|
rockchip,capture-channels = <8>;
|
|
rockchip,playback-channels = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&io_domains {
|
|
audio-supply = <&vcc_3v0>;
|
|
gpio1830-supply = <&vcc_3v0>;
|
|
sdmmc-supply = <&vcc_sdio>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
bus-scan-delay-ms = <1000>;
|
|
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
max-link-speed = <2>;
|
|
num-lanes = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_clkreqn_cpm>;
|
|
vpcie0v9-supply = <&vcca0v9_s3>;
|
|
vpcie1v8-supply = <&vcca1v8_s3>;
|
|
vpcie3v3-supply = <&vcc3v3_ssd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
buttons {
|
|
pwrbtn_gpio: pwrbtn-gpio {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
lidbtn_gpio: lidbtn-gpio {
|
|
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
dc-charger {
|
|
dc_det_gpio: dc-det-gpio {
|
|
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
es8316 {
|
|
hp_det_gpio: hp-det-gpio {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
fusb302x {
|
|
fusb0_int_gpio: fusb0-int-gpio {
|
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
i2s1 {
|
|
i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
|
|
rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
lcd-panel {
|
|
lcdvcc_en_gpio: lcdvcc-en-gpio {
|
|
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
panel_en_gpio: panel-en-gpio {
|
|
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
lcd_panel_reset_gpio: lcd-panel-reset-gpio {
|
|
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
pwrled_gpio: pwrled_gpio {
|
|
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
slpled_gpio: slpled_gpio {
|
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int_l_gpio: pmic-int-l-gpio {
|
|
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
vsel1_gpio: vsel1-gpio {
|
|
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
vsel2_gpio: vsel2-gpio {
|
|
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
sdcard {
|
|
sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
|
|
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h_gpio: wifi-enable-h-gpio {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb-typec {
|
|
vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
|
|
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb2 {
|
|
pwr_5v_gpio: pwr-5v-gpio {
|
|
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
|
|
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
bt_wake_gpio: bt-wake-gpio {
|
|
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_host_wake_gpio: bt-host-wake-gpio {
|
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_reset_gpio: bt-reset-gpio {
|
|
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
pmu1830-supply = <&vcc_3v0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcca1v8_s3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc3v0_sd>;
|
|
vqmmc-supply = <&vcc_sdio>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio0 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi1 {
|
|
max-freq = <10000000>;
|
|
status = "okay";
|
|
|
|
spiflash: flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
m25p,fast-read;
|
|
spi-max-frequency = <10000000>;
|
|
};
|
|
};
|
|
|
|
&tcphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tcphy0_dp {
|
|
port {
|
|
tcphy0_typec_dp: endpoint {
|
|
remote-endpoint = <&usbc_dp>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tcphy0_usb3 {
|
|
port {
|
|
tcphy0_typec_ss: endpoint {
|
|
remote-endpoint = <&usbc_ss>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tcphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
/* tshut mode 0:CRU 1:GPIO */
|
|
rockchip,hw-tshut-mode = <1>;
|
|
/* tshut polarity 0:LOW 1:HIGH */
|
|
rockchip,hw-tshut-polarity = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
|
|
u2phy0_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy0_host: host-port {
|
|
phy-supply = <&vcc5v0_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
port {
|
|
u2phy0_typec_hs: endpoint {
|
|
remote-endpoint = <&usbc_hs>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
|
|
u2phy1_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy1_host: host-port {
|
|
phy-supply = <&vcc5v0_otg>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm4345c5";
|
|
clocks = <&rk808 1>;
|
|
clock-names = "lpo";
|
|
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
max-speed = <1500000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
|
|
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
vbat-supply = <&wifi_bat>;
|
|
vddio-supply = <&vcc_wl>;
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl_mmu {
|
|
status = "okay";
|
|
};
|