mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
0fd3d91152
Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
321 lines
7.1 KiB
C
321 lines
7.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* LPC32xxGPIO driver
|
|
*
|
|
* (C) Copyright 2014 DENX Software Engineering GmbH
|
|
* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-lpc32xx/cpu.h>
|
|
#include <asm/arch-lpc32xx/gpio.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <dm.h>
|
|
|
|
/**
|
|
* LPC32xx GPIOs work in banks but are non-homogeneous:
|
|
* - each bank holds a different number of GPIOs
|
|
* - some GPIOs are input/ouput, some input only, some output only;
|
|
* - some GPIOs have different meanings as an input and as an output;
|
|
* - some GPIOs are controlled on a given port and bit index, but
|
|
* read on another one.
|
|
*
|
|
* In order to keep this code simple, GPIOS are considered here as
|
|
* homogeneous and linear, from 0 to 159.
|
|
*
|
|
* ** WARNING #1 **
|
|
*
|
|
* Client code is responsible for properly using valid GPIO numbers,
|
|
* including cases where a single physical GPIO has differing numbers
|
|
* for setting its direction, reading it and/or writing to it.
|
|
*
|
|
* ** WARNING #2 **
|
|
*
|
|
* Please read NOTE in description of lpc32xx_gpio_get_function().
|
|
*/
|
|
|
|
#define LPC32XX_GPIOS 160
|
|
|
|
struct lpc32xx_gpio_priv {
|
|
struct gpio_regs *regs;
|
|
/* GPIO FUNCTION: SEE WARNING #2 */
|
|
signed char function[LPC32XX_GPIOS];
|
|
};
|
|
|
|
/**
|
|
* We have 4 GPIO ports of 32 bits each
|
|
*
|
|
* Port mapping offset (32 bits each):
|
|
* - Port 0: 0
|
|
* - Port 1: 32
|
|
* - Port 2: 64
|
|
* - Port 3: GPO / GPIO (output): 96
|
|
* - Port 3: GPI: 128
|
|
*/
|
|
|
|
#define MAX_GPIO 160
|
|
|
|
#define GPIO_TO_PORT(gpio) ((gpio / 32) & 7)
|
|
#define GPIO_TO_RANK(gpio) (gpio % 32)
|
|
#define GPIO_TO_MASK(gpio) (1 << (gpio % 32))
|
|
|
|
/**
|
|
* Configure a GPIO number 'offset' as input
|
|
*/
|
|
|
|
static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset)
|
|
{
|
|
int port, mask;
|
|
struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
|
|
struct gpio_regs *regs = gpio_priv->regs;
|
|
|
|
port = GPIO_TO_PORT(offset);
|
|
mask = GPIO_TO_MASK(offset);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
writel(mask, ®s->p0_dir_clr);
|
|
break;
|
|
case 1:
|
|
writel(mask, ®s->p1_dir_clr);
|
|
break;
|
|
case 2:
|
|
/* ports 2 and 3 share a common direction */
|
|
writel(mask, ®s->p2_p3_dir_clr);
|
|
break;
|
|
case 3:
|
|
/* Setup direction only for GPIO_xx. */
|
|
if ((mask >= 25) && (mask <= 30))
|
|
writel(mask, ®s->p2_p3_dir_clr);
|
|
break;
|
|
case 4:
|
|
/* GPI_xx; nothing to do. */
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
/* GPIO FUNCTION: SEE WARNING #2 */
|
|
gpio_priv->function[offset] = GPIOF_INPUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Get the value of a GPIO
|
|
*/
|
|
|
|
static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset)
|
|
{
|
|
int port, rank, mask, value;
|
|
struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
|
|
struct gpio_regs *regs = gpio_priv->regs;
|
|
|
|
port = GPIO_TO_PORT(offset);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
value = readl(®s->p0_inp_state);
|
|
break;
|
|
case 1:
|
|
value = readl(®s->p1_inp_state);
|
|
break;
|
|
case 2:
|
|
value = readl(®s->p2_inp_state);
|
|
break;
|
|
case 3:
|
|
/* Read GPO_xx and GPIO_xx (as output) using p3_outp_state. */
|
|
value = readl(®s->p3_outp_state);
|
|
break;
|
|
case 4:
|
|
/* Read GPI_xx and GPIO_xx (as input) using p3_inp_state. */
|
|
value = readl(®s->p3_inp_state);
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
rank = GPIO_TO_RANK(offset);
|
|
mask = GPIO_TO_MASK(offset);
|
|
|
|
return (value & mask) >> rank;
|
|
}
|
|
|
|
/**
|
|
* Set a GPIO
|
|
*/
|
|
|
|
static int gpio_set(struct udevice *dev, unsigned gpio)
|
|
{
|
|
int port, mask;
|
|
struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
|
|
struct gpio_regs *regs = gpio_priv->regs;
|
|
|
|
port = GPIO_TO_PORT(gpio);
|
|
mask = GPIO_TO_MASK(gpio);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
writel(mask, ®s->p0_outp_set);
|
|
break;
|
|
case 1:
|
|
writel(mask, ®s->p1_outp_set);
|
|
break;
|
|
case 2:
|
|
writel(mask, ®s->p2_outp_set);
|
|
break;
|
|
case 3:
|
|
writel(mask, ®s->p3_outp_set);
|
|
break;
|
|
case 4:
|
|
/* GPI_xx; invalid. */
|
|
default:
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Clear a GPIO
|
|
*/
|
|
|
|
static int gpio_clr(struct udevice *dev, unsigned gpio)
|
|
{
|
|
int port, mask;
|
|
struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
|
|
struct gpio_regs *regs = gpio_priv->regs;
|
|
|
|
port = GPIO_TO_PORT(gpio);
|
|
mask = GPIO_TO_MASK(gpio);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
writel(mask, ®s->p0_outp_clr);
|
|
break;
|
|
case 1:
|
|
writel(mask, ®s->p1_outp_clr);
|
|
break;
|
|
case 2:
|
|
writel(mask, ®s->p2_outp_clr);
|
|
break;
|
|
case 3:
|
|
writel(mask, ®s->p3_outp_clr);
|
|
break;
|
|
case 4:
|
|
/* GPI_xx; invalid. */
|
|
default:
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Set the value of a GPIO
|
|
*/
|
|
|
|
static int lpc32xx_gpio_set_value(struct udevice *dev, unsigned offset,
|
|
int value)
|
|
{
|
|
if (value)
|
|
return gpio_set(dev, offset);
|
|
else
|
|
return gpio_clr(dev, offset);
|
|
}
|
|
|
|
/**
|
|
* Configure a GPIO number 'offset' as output with given initial value.
|
|
*/
|
|
|
|
static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset,
|
|
int value)
|
|
{
|
|
int port, mask;
|
|
struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
|
|
struct gpio_regs *regs = gpio_priv->regs;
|
|
|
|
port = GPIO_TO_PORT(offset);
|
|
mask = GPIO_TO_MASK(offset);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
writel(mask, ®s->p0_dir_set);
|
|
break;
|
|
case 1:
|
|
writel(mask, ®s->p1_dir_set);
|
|
break;
|
|
case 2:
|
|
/* ports 2 and 3 share a common direction */
|
|
writel(mask, ®s->p2_p3_dir_set);
|
|
break;
|
|
case 3:
|
|
/* Setup direction only for GPIO_xx. */
|
|
if ((mask >= 25) && (mask <= 30))
|
|
writel(mask, ®s->p2_p3_dir_set);
|
|
break;
|
|
case 4:
|
|
/* GPI_xx; invalid. */
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
/* GPIO FUNCTION: SEE WARNING #2 */
|
|
gpio_priv->function[offset] = GPIOF_OUTPUT;
|
|
|
|
return lpc32xx_gpio_set_value(dev, offset, value);
|
|
}
|
|
|
|
/**
|
|
* GPIO functions are supposed to be computed from their current
|
|
* configuration, but that's way too complicated in LPC32XX. A simpler
|
|
* approach is used, where the GPIO functions are cached in an array.
|
|
* When the GPIO is in use, its function is either "input" or "output"
|
|
* depending on its direction, otherwise its function is "unknown".
|
|
*
|
|
* ** NOTE **
|
|
*
|
|
* THIS APPROACH WAS CHOSEN DU TO THE COMPLEX NATURE OF THE LPC32XX
|
|
* GPIOS; DO NOT TAKE THIS AS AN EXAMPLE FOR NEW CODE.
|
|
*/
|
|
|
|
static int lpc32xx_gpio_get_function(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
|
|
return gpio_priv->function[offset];
|
|
}
|
|
|
|
static const struct dm_gpio_ops gpio_lpc32xx_ops = {
|
|
.direction_input = lpc32xx_gpio_direction_input,
|
|
.direction_output = lpc32xx_gpio_direction_output,
|
|
.get_value = lpc32xx_gpio_get_value,
|
|
.set_value = lpc32xx_gpio_set_value,
|
|
.get_function = lpc32xx_gpio_get_function,
|
|
};
|
|
|
|
static int lpc32xx_gpio_probe(struct udevice *dev)
|
|
{
|
|
struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
|
|
if (dev_of_offset(dev) == -1) {
|
|
/* Tell the uclass how many GPIOs we have */
|
|
uc_priv->gpio_count = LPC32XX_GPIOS;
|
|
}
|
|
|
|
/* set base address for GPIO registers */
|
|
gpio_priv->regs = (struct gpio_regs *)GPIO_BASE;
|
|
|
|
/* all GPIO functions are unknown until requested */
|
|
/* GPIO FUNCTION: SEE WARNING #2 */
|
|
memset(gpio_priv->function, GPIOF_UNKNOWN, sizeof(gpio_priv->function));
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(gpio_lpc32xx) = {
|
|
.name = "gpio_lpc32xx",
|
|
.id = UCLASS_GPIO,
|
|
.ops = &gpio_lpc32xx_ops,
|
|
.probe = lpc32xx_gpio_probe,
|
|
.priv_auto = sizeof(struct lpc32xx_gpio_priv),
|
|
};
|