mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
f8f8acd724
The patch adds support for TTECH vision2 board. The board has 512MB RAM, SDHC slot and 4MB SPI device from StMicron. Signed-off-by: Stefano Babic <sbabic@denx.de>
209 lines
6.1 KiB
INI
209 lines
6.1 KiB
INI
#
|
|
# (C) Copyright 2009
|
|
# Stefano Babic DENX Software Engineering sbabic@denx.de.
|
|
#
|
|
# (C) Copyright 2010
|
|
# Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
|
|
#
|
|
# See file CREDITS for list of people who contributed to this
|
|
# project.
|
|
#
|
|
# This program is free software; you can redistribute it and/or
|
|
# modify it under the terms of the GNU General Public License as
|
|
# published by the Free Software Foundation; either version 2 of
|
|
# the License or (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program; if not write to the Free Software
|
|
# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
|
|
# MA 02110-1301 USA
|
|
#
|
|
# Refer docs/README.imxmage for more details about how-to configure
|
|
# and create imximage boot image
|
|
#
|
|
# The syntax is taken as close as possible with the kwbimage
|
|
|
|
# Boot Device : one of
|
|
# spi, nand, onenand, sd
|
|
|
|
BOOT_FROM spi
|
|
|
|
# Device Configuration Data (DCD)
|
|
#
|
|
# Each entry must have the format:
|
|
# Addr-type Address Value
|
|
#
|
|
# where:
|
|
# Addr-type register length (1,2 or 4 bytes)
|
|
# Address absolute address of the register
|
|
# value value to be stored in the register
|
|
|
|
#######################
|
|
### Disable WDOG ###
|
|
#######################
|
|
DATA 2 0x73f98000 0x30
|
|
|
|
#######################
|
|
### SET DDR Clk ###
|
|
#######################
|
|
|
|
# CCM: CBMCR - ddr_clk_sel: axi_b (133MHz)
|
|
DATA 4 0x73FD4018 0x000024C0
|
|
|
|
# DOUBLE SPI CLK (13MHz->26 MHz Clock)
|
|
DATA 4 0x73FD4038 0x2010241
|
|
|
|
#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST
|
|
DATA 4 0x73fa8600 0x00000107
|
|
#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST
|
|
DATA 4 0x73fa8604 0x00000107
|
|
#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
|
|
DATA 4 0x73fa8608 0x00000187
|
|
#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
|
|
DATA 4 0x73fa860c 0x00000187
|
|
#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST
|
|
DATA 4 0x73fa8614 0x00000107
|
|
#IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2)
|
|
DATA 4 0x73fa86a8 0x00000187
|
|
|
|
#######################
|
|
### Settings IOMUXC ###
|
|
#######################
|
|
|
|
# DDR IOMUX configuration
|
|
# Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
|
|
# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
|
|
DATA 4 0x73fa84b8 0x000000e7
|
|
# PVTC MAX (at GPC, PGR reg)
|
|
#DATA 4 0x73FD8004 0x1fc00000
|
|
|
|
#DQM0 DS high slew rate slow
|
|
DATA 4 0x73fa84d4 0x000000e4
|
|
#DQM1 DS high slew rate slow
|
|
DATA 4 0x73fa84d8 0x000000e4
|
|
#DQM2 DS high slew rate slow
|
|
DATA 4 0x73fa84dc 0x000000e4
|
|
#DQM3 DS high slew rate slow
|
|
DATA 4 0x73fa84e0 0x000000e4
|
|
|
|
#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow
|
|
DATA 4 0x73fa84bc 0x000000c4
|
|
#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow
|
|
DATA 4 0x73fa84c0 0x000000c4
|
|
#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow
|
|
DATA 4 0x73fa84c4 0x000000c4
|
|
#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow
|
|
DATA 4 0x73fa84c8 0x000000c4
|
|
|
|
#DRAM_DATA B0
|
|
DATA 4 0x73fa88a4 0x00000004
|
|
#DRAM_DATA B1
|
|
DATA 4 0x73fa88ac 0x00000004
|
|
#DRAM_DATA B2
|
|
DATA 4 0x73fa88b8 0x00000004
|
|
#DRAM_DATA B3
|
|
DATA 4 0x73fa882c 0x00000004
|
|
|
|
#DRAM_DATA B0 slew rate
|
|
DATA 4 0x73fa8878 0x00000000
|
|
#DRAM_DATA B1 slew rate
|
|
DATA 4 0x73fa8880 0x00000000
|
|
#DRAM_DATA B2 slew rate
|
|
DATA 4 0x73fa888c 0x00000000
|
|
#DRAM_DATA B3 slew rate
|
|
DATA 4 0x73fa889c 0x00000000
|
|
|
|
#######################
|
|
### Configure SDRAM ###
|
|
#######################
|
|
|
|
# Configure CS0
|
|
#######################
|
|
|
|
# ESDCTL0: Enable controller
|
|
DATA 4 0x83fd9000 0x83220000
|
|
|
|
# Init DRAM on CS0
|
|
# ESDSCR: Precharge command
|
|
DATA 4 0x83fd9014 0x04008008
|
|
# ESDSCR: Refresh command
|
|
DATA 4 0x83fd9014 0x00008010
|
|
# ESDSCR: Refresh command
|
|
DATA 4 0x83fd9014 0x00008010
|
|
# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
|
|
DATA 4 0x83fd9014 0x00338018
|
|
# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
|
|
DATA 4 0x83fd9014 0x0020801a
|
|
# ESDSCR
|
|
DATA 4 0x83fd9014 0x00008000
|
|
|
|
# ESDSCR: EMR with full Drive strength
|
|
#DATA 4 0x83fd9014 0x0000801a
|
|
|
|
# ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8
|
|
DATA 4 0x83fd9000 0xC3220000
|
|
|
|
# ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
|
|
# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
|
|
#DATA 4 0x83fd9004 0xC33574AA
|
|
|
|
#micron mDDR
|
|
# ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
|
|
# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
|
|
#DATA 4 0x83FD9004 0x101564a8
|
|
|
|
#hynix mDDR
|
|
# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
|
|
# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
|
|
DATA 4 0x83FD9004 0x704564a8
|
|
|
|
# ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2
|
|
DATA 4 0x83fd9010 0x000a1700
|
|
|
|
# Configure CS1
|
|
#######################
|
|
|
|
# ESDCTL1: Enable controller
|
|
DATA 4 0x83fd9008 0x83220000
|
|
|
|
# Init DRAM on CS1
|
|
# ESDSCR: Precharge command
|
|
DATA 4 0x83fd9014 0x0400800c
|
|
# ESDSCR: Refresh command
|
|
DATA 4 0x83fd9014 0x00008014
|
|
# ESDSCR: Refresh command
|
|
DATA 4 0x83fd9014 0x00008014
|
|
# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
|
|
DATA 4 0x83fd9014 0x0033801c
|
|
# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
|
|
DATA 4 0x83fd9014 0x0020801e
|
|
# ESDSCR
|
|
DATA 4 0x83fd9014 0x00008004
|
|
|
|
# ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8
|
|
DATA 4 0x83fd9008 0xC3220000
|
|
|
|
# ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
|
|
# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
|
|
#DATA 4 0x83fd900c 0xC33574AA
|
|
|
|
#micron mDDR
|
|
# ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
|
|
# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
|
|
#DATA 4 0x83FD900C 0x101564a8
|
|
|
|
#hynix mDDR
|
|
# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
|
|
# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
|
|
DATA 4 0x83FD900C 0x704564a8
|
|
|
|
# ESDSCR (mDRAM configuration finished)
|
|
DATA 4 0x83FD9014 0x00000004
|
|
|
|
# ESDSCR - clear "configuration request" bit
|
|
DATA 4 0x83fd9014 0x00000000
|