u-boot/arch/powerpc/cpu/mpc5xxx/spl_boot.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

76 lines
1.7 KiB
C

/*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spl.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Needed to align size SPL image to a 4-byte length
*/
u32 end_align __attribute__ ((section(".end_align")));
/*
* Return selected boot device. On MPC5200 its only NOR flash right now.
*/
u32 spl_boot_device(void)
{
return BOOT_DEVICE_NOR;
}
/*
* SPL version of board_init_f()
*/
void board_init_f(ulong bootflag)
{
end_align = (u32)__spl_flash_end;
/*
* On MPC5200, the initial RAM (and gd) is located in the internal
* SRAM. So we can actually call the preloader console init code
* before calling initdram(). This makes serial output (printf)
* available very early, even before SDRAM init, which has been
* an U-Boot priciple from day 1.
*/
/*
* Init global_data pointer. Has to be done before calling
* get_clocks(), as it stores some clock values into gd needed
* later on in the serial driver.
*/
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
/* Clear initial global data */
memset((void *)gd, 0, sizeof(gd_t));
/*
* get_clocks() needs to be called so that the serial driver
* works correctly
*/
get_clocks();
/*
* Do rudimental console / serial setup
*/
preloader_console_init();
/*
* First we need to initialize the SDRAM, so that the real
* U-Boot or the OS (Linux) can be loaded
*/
initdram(0);
/* Clear bss */
memset(__bss_start, '\0', __bss_end - __bss_start);
/*
* Call board_init_r() (SPL framework version) to load and boot
* real U-Boot or OS
*/
board_init_r(NULL, 0);
/* Does not return!!! */
}