mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
245 lines
5.8 KiB
C
245 lines
5.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
|
|
|
|
#define CONFIG_SYS_FSL_CLK
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 100000000
|
|
#define CONFIG_DDR_CLK_FREQ 100000000
|
|
|
|
/*
|
|
* DDR: 800 MHz ( 1600 MT/s data rate )
|
|
*/
|
|
|
|
#define DDR_SDRAM_CFG 0x470c0008
|
|
#define DDR_CS0_BNDS 0x008000bf
|
|
#define DDR_CS0_CONFIG 0x80014302
|
|
#define DDR_TIMING_CFG_0 0x50550004
|
|
#define DDR_TIMING_CFG_1 0xbcb38c56
|
|
#define DDR_TIMING_CFG_2 0x0040d120
|
|
#define DDR_TIMING_CFG_3 0x010e1000
|
|
#define DDR_TIMING_CFG_4 0x00000001
|
|
#define DDR_TIMING_CFG_5 0x03401400
|
|
#define DDR_SDRAM_CFG_2 0x00401010
|
|
#define DDR_SDRAM_MODE 0x00061c60
|
|
#define DDR_SDRAM_MODE_2 0x00180000
|
|
#define DDR_SDRAM_INTERVAL 0x18600618
|
|
#define DDR_DDR_WRLVL_CNTL 0x8655f605
|
|
#define DDR_DDR_WRLVL_CNTL_2 0x05060607
|
|
#define DDR_DDR_WRLVL_CNTL_3 0x05050505
|
|
#define DDR_DDR_CDR1 0x80040000
|
|
#define DDR_DDR_CDR2 0x00000001
|
|
#define DDR_SDRAM_CLK_CNTL 0x02000000
|
|
#define DDR_DDR_ZQ_CNTL 0x89080600
|
|
#define DDR_CS0_CONFIG_2 0
|
|
#define DDR_SDRAM_CFG_MEM_EN 0x80000000
|
|
#define SDRAM_CFG2_D_INIT 0x00000010
|
|
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
|
|
#define SDRAM_CFG2_FRC_SR 0x80000000
|
|
#define SDRAM_CFG_BI 0x00000001
|
|
|
|
#ifdef CONFIG_RAMBOOT_PBL
|
|
#define CONFIG_SYS_FSL_PBL_PBI \
|
|
board/freescale/ls1021aiot/ls102xa_pbi.cfg
|
|
#endif
|
|
|
|
#ifdef CONFIG_SD_BOOT
|
|
#define CONFIG_SYS_FSL_PBL_RCW \
|
|
board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_ENV_SUPPORT
|
|
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
|
|
#define CONFIG_SPL_I2C_SUPPORT
|
|
#define CONFIG_SPL_WATCHDOG_SUPPORT
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
|
|
|
|
#define CONFIG_SPL_MAX_SIZE 0x1a000
|
|
#define CONFIG_SPL_STACK 0x1001d000
|
|
#define CONFIG_SPL_PAD_TO 0x1c000
|
|
|
|
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
|
|
CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
|
|
#define CONFIG_SYS_MONITOR_LEN 0x80000
|
|
#endif
|
|
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
|
|
|
|
/*
|
|
* Serial Port
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
|
|
/* EEPROM */
|
|
#define CONFIG_ID_EEPROM
|
|
#define CONFIG_SYS_I2C_EEPROM_NXID
|
|
#define CONFIG_SYS_EEPROM_BUS_NUM 0
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
/*
|
|
* MMC
|
|
*/
|
|
#define CONFIG_CMD_MMC
|
|
|
|
/* SATA */
|
|
#define CONFIG_SCSI_AHCI_PLAT
|
|
#ifndef PCI_DEVICE_ID_FREESCALE_AHCI
|
|
#define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440
|
|
#endif
|
|
#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \
|
|
PCI_DEVICE_ID_FREESCALE_AHCI}
|
|
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
|
CONFIG_SYS_SCSI_MAX_LUN)
|
|
|
|
/* SPI */
|
|
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
|
|
#define CONFIG_SPI_FLASH_SPANSION
|
|
|
|
/* QSPI */
|
|
#define QSPI0_AMBA_BASE 0x40000000
|
|
#define FSL_QSPI_FLASH_SIZE (1 << 24)
|
|
#define FSL_QSPI_FLASH_NUM 2
|
|
#define CONFIG_SPI_FLASH_SPANSION
|
|
#endif
|
|
|
|
/* DM SPI */
|
|
#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_DM_SPI_FLASH
|
|
#endif
|
|
|
|
/*
|
|
* eTSEC
|
|
*/
|
|
|
|
#ifdef CONFIG_TSEC_ENET
|
|
#define CONFIG_MII_DEFAULT_TSEC 1
|
|
#define CONFIG_TSEC1 1
|
|
#define CONFIG_TSEC1_NAME "eTSEC1"
|
|
#define CONFIG_TSEC2 1
|
|
#define CONFIG_TSEC2_NAME "eTSEC2"
|
|
|
|
#define TSEC1_PHY_ADDR 1
|
|
#define TSEC2_PHY_ADDR 3
|
|
|
|
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC2_PHYIDX 0
|
|
|
|
#define CONFIG_ETHPRIME "eTSEC2"
|
|
|
|
#define CONFIG_PHY_ATHEROS
|
|
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_HAS_ETH2
|
|
#endif
|
|
|
|
/* PCIe */
|
|
#define CONFIG_PCIE1 /* PCIE controler 1 */
|
|
#define CONFIG_PCIE2 /* PCIE controler 2 */
|
|
|
|
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
|
|
|
|
#ifdef CONFIG_PCI
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#endif
|
|
|
|
#define CONFIG_CMD_MII
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
|
|
#define CONFIG_PEN_ADDR_BIG_ENDIAN
|
|
#define CONFIG_LAYERSCAPE_NS_ACCESS
|
|
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
|
|
#define COUNTER_FREQUENCY 12500000
|
|
|
|
#define CONFIG_HWCONFIG
|
|
#define HWCONFIG_BUFFER_SIZE 256
|
|
|
|
#define CONFIG_FSL_DEVICE_DISABLE
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdt_high=0xffffffff\0"
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_CMD_GREPENV
|
|
#define CONFIG_CMD_MEMINFO
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x82000000
|
|
|
|
#define CONFIG_LS102XA_STREAM_ID
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
|
|
#else
|
|
/* start of monitor */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#endif
|
|
|
|
#define CONFIG_SYS_QE_FW_ADDR 0x67f40000
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#if defined(CONFIG_SD_BOOT)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#endif
|
|
|
|
#define CONFIG_OF_BOARD_SETUP
|
|
#define CONFIG_OF_STDOUT_VIA_ALIAS
|
|
|
|
#include <asm/fsl_secure_boot.h>
|
|
|
|
#endif
|