mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-28 14:03:44 +00:00
78efae613b
The initial Vyasa-rk3288 TPL implementation is to reuse the
SPL_TEXT_BASE for TPL and SPL as 0x0 and 0xff704000 respectively.
But the below commit implements the reverse way of using TEXT_BASE's
like 0xff704000 for TPL and 0x0 for SPL and which indeed update
the SPL_TEXT_BASE for vyasa-rk3288 board.
"rockchip: Kconfig: enable TPL support for rk3328"
(sha1: 3f47db0275)
So, fix by dropping the legacy SPL_TEXT_BASE and it will
reassign 0x0 by default based on Kconfig definition.
Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
88 lines
2.2 KiB
Text
88 lines
2.2 KiB
Text
CONFIG_ARM=y
|
|
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
|
|
# CONFIG_SPL_USE_ARCH_MEMSET is not set
|
|
CONFIG_ARCH_ROCKCHIP=y
|
|
CONFIG_SYS_TEXT_BASE=0x00100000
|
|
CONFIG_ROCKCHIP_RK3288=y
|
|
CONFIG_TARGET_VYASA_RK3288=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_SPL_STACK_R_ADDR=0x80000
|
|
CONFIG_DEBUG_UART_BASE=0xff690000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_USE_PREBOOT=y
|
|
CONFIG_SILENT_CONSOLE=y
|
|
CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_SF=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_PMIC=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
CONFIG_SPL_PARTITION_UUIDS=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="rk3288-vyasa"
|
|
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_REGMAP=y
|
|
CONFIG_SPL_REGMAP=y
|
|
CONFIG_SYSCON=y
|
|
CONFIG_SPL_SYSCON=y
|
|
# CONFIG_SPL_SIMPLE_BUS is not set
|
|
CONFIG_CLK=y
|
|
CONFIG_SPL_CLK=y
|
|
CONFIG_ROCKCHIP_GPIO=y
|
|
CONFIG_SYS_I2C_ROCKCHIP=y
|
|
CONFIG_LED=y
|
|
CONFIG_LED_GPIO=y
|
|
CONFIG_MMC_DW=y
|
|
CONFIG_MMC_DW_ROCKCHIP=y
|
|
CONFIG_SPI_FLASH=y
|
|
CONFIG_SF_DEFAULT_SPEED=20000000
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
CONFIG_GMAC_ROCKCHIP=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_SPL_PINCTRL=y
|
|
CONFIG_DM_PMIC=y
|
|
# CONFIG_SPL_PMIC_CHILDREN is not set
|
|
CONFIG_PMIC_RK8XX=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_REGULATOR_RK8XX=y
|
|
CONFIG_PWM_ROCKCHIP=y
|
|
CONFIG_RAM=y
|
|
CONFIG_SPL_RAM=y
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_DWC2=y
|
|
CONFIG_ROCKCHIP_USB2_PHY=y
|
|
CONFIG_USB_KEYBOARD=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x2207
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
|
|
CONFIG_USB_GADGET_DWC2_OTG=y
|
|
CONFIG_USB_FUNCTION_MASS_STORAGE=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_DM_VIDEO=y
|
|
CONFIG_DISPLAY=y
|
|
CONFIG_VIDEO_ROCKCHIP=y
|
|
CONFIG_DISPLAY_ROCKCHIP_HDMI=y
|
|
CONFIG_CONSOLE_SCROLL_LINES=10
|
|
CONFIG_CMD_DHRYSTONE=y
|
|
CONFIG_ERRNO_STR=y
|