mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
130 lines
2.9 KiB
C
130 lines
2.9 KiB
C
/*
|
|
* (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew, Tsi-Chung.Liew@freescale.com.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Minimal serial functions needed to use one of the uart ports
|
|
* as serial console interface.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
|
|
#include <asm/immap.h>
|
|
#include <asm/uart.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern void uart_port_conf(int port);
|
|
|
|
static int mcf_serial_init(void)
|
|
{
|
|
volatile uart_t *uart;
|
|
u32 counter;
|
|
|
|
uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
|
|
|
|
uart_port_conf(CONFIG_SYS_UART_PORT);
|
|
|
|
/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
|
|
uart->ucr = UART_UCR_RESET_RX;
|
|
uart->ucr = UART_UCR_RESET_TX;
|
|
uart->ucr = UART_UCR_RESET_ERROR;
|
|
uart->ucr = UART_UCR_RESET_MR;
|
|
__asm__("nop");
|
|
|
|
uart->uimr = 0;
|
|
|
|
/* write to CSR: RX/TX baud rate from timers */
|
|
uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK);
|
|
|
|
uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE);
|
|
uart->umr = UART_UMR_SB_STOP_BITS_1;
|
|
|
|
/* Setting up BaudRate */
|
|
counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
|
|
counter = counter / gd->baudrate;
|
|
|
|
/* write to CTUR: divide counter upper byte */
|
|
uart->ubg1 = (u8) ((counter & 0xff00) >> 8);
|
|
/* write to CTLR: divide counter lower byte */
|
|
uart->ubg2 = (u8) (counter & 0x00ff);
|
|
|
|
uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void mcf_serial_putc(const char c)
|
|
{
|
|
volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
|
|
|
|
if (c == '\n')
|
|
serial_putc('\r');
|
|
|
|
/* Wait for last character to go. */
|
|
while (!(uart->usr & UART_USR_TXRDY)) ;
|
|
|
|
uart->utb = c;
|
|
}
|
|
|
|
static int mcf_serial_getc(void)
|
|
{
|
|
volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
|
|
|
|
/* Wait for a character to arrive. */
|
|
while (!(uart->usr & UART_USR_RXRDY)) ;
|
|
return uart->urb;
|
|
}
|
|
|
|
static int mcf_serial_tstc(void)
|
|
{
|
|
volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
|
|
|
|
return (uart->usr & UART_USR_RXRDY);
|
|
}
|
|
|
|
static void mcf_serial_setbrg(void)
|
|
{
|
|
volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
|
|
u32 counter;
|
|
|
|
/* Setting up BaudRate */
|
|
counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
|
|
counter = counter / gd->baudrate;
|
|
|
|
/* write to CTUR: divide counter upper byte */
|
|
uart->ubg1 = ((counter & 0xff00) >> 8);
|
|
/* write to CTLR: divide counter lower byte */
|
|
uart->ubg2 = (counter & 0x00ff);
|
|
|
|
uart->ucr = UART_UCR_RESET_RX;
|
|
uart->ucr = UART_UCR_RESET_TX;
|
|
|
|
uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED;
|
|
}
|
|
|
|
static struct serial_device mcf_serial_drv = {
|
|
.name = "mcf_serial",
|
|
.start = mcf_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = mcf_serial_setbrg,
|
|
.putc = mcf_serial_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = mcf_serial_getc,
|
|
.tstc = mcf_serial_tstc,
|
|
};
|
|
|
|
void mcf_serial_initialize(void)
|
|
{
|
|
serial_register(&mcf_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &mcf_serial_drv;
|
|
}
|