mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
cd93d625fd
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
360 lines
7.4 KiB
C
360 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* SH QSPI (Quad SPI) driver
|
|
*
|
|
* Copyright (C) 2013 Renesas Electronics Corporation
|
|
* Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <console.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/arch/rmobile.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitops.h>
|
|
|
|
/* SH QSPI register bit masks <REG>_<BIT> */
|
|
#define SPCR_MSTR 0x08
|
|
#define SPCR_SPE 0x40
|
|
#define SPSR_SPRFF 0x80
|
|
#define SPSR_SPTEF 0x20
|
|
#define SPPCR_IO3FV 0x04
|
|
#define SPPCR_IO2FV 0x02
|
|
#define SPPCR_IO1FV 0x01
|
|
#define SPBDCR_RXBC0 BIT(0)
|
|
#define SPCMD_SCKDEN BIT(15)
|
|
#define SPCMD_SLNDEN BIT(14)
|
|
#define SPCMD_SPNDEN BIT(13)
|
|
#define SPCMD_SSLKP BIT(7)
|
|
#define SPCMD_BRDV0 BIT(2)
|
|
#define SPCMD_INIT1 SPCMD_SCKDEN | SPCMD_SLNDEN | \
|
|
SPCMD_SPNDEN | SPCMD_SSLKP | \
|
|
SPCMD_BRDV0
|
|
#define SPCMD_INIT2 SPCMD_SPNDEN | SPCMD_SSLKP | \
|
|
SPCMD_BRDV0
|
|
#define SPBFCR_TXRST BIT(7)
|
|
#define SPBFCR_RXRST BIT(6)
|
|
#define SPBFCR_TXTRG 0x30
|
|
#define SPBFCR_RXTRG 0x07
|
|
|
|
/* SH QSPI register set */
|
|
struct sh_qspi_regs {
|
|
u8 spcr;
|
|
u8 sslp;
|
|
u8 sppcr;
|
|
u8 spsr;
|
|
u32 spdr;
|
|
u8 spscr;
|
|
u8 spssr;
|
|
u8 spbr;
|
|
u8 spdcr;
|
|
u8 spckd;
|
|
u8 sslnd;
|
|
u8 spnd;
|
|
u8 dummy0;
|
|
u16 spcmd0;
|
|
u16 spcmd1;
|
|
u16 spcmd2;
|
|
u16 spcmd3;
|
|
u8 spbfcr;
|
|
u8 dummy1;
|
|
u16 spbdcr;
|
|
u32 spbmul0;
|
|
u32 spbmul1;
|
|
u32 spbmul2;
|
|
u32 spbmul3;
|
|
};
|
|
|
|
struct sh_qspi_slave {
|
|
#ifndef CONFIG_DM_SPI
|
|
struct spi_slave slave;
|
|
#endif
|
|
struct sh_qspi_regs *regs;
|
|
};
|
|
|
|
static void sh_qspi_init(struct sh_qspi_slave *ss)
|
|
{
|
|
/* QSPI initialize */
|
|
/* Set master mode only */
|
|
writeb(SPCR_MSTR, &ss->regs->spcr);
|
|
|
|
/* Set SSL signal level */
|
|
writeb(0x00, &ss->regs->sslp);
|
|
|
|
/* Set MOSI signal value when transfer is in idle state */
|
|
writeb(SPPCR_IO3FV|SPPCR_IO2FV, &ss->regs->sppcr);
|
|
|
|
/* Set bit rate. See 58.3.8 Quad Serial Peripheral Interface */
|
|
writeb(0x01, &ss->regs->spbr);
|
|
|
|
/* Disable Dummy Data Transmission */
|
|
writeb(0x00, &ss->regs->spdcr);
|
|
|
|
/* Set clock delay value */
|
|
writeb(0x00, &ss->regs->spckd);
|
|
|
|
/* Set SSL negation delay value */
|
|
writeb(0x00, &ss->regs->sslnd);
|
|
|
|
/* Set next-access delay value */
|
|
writeb(0x00, &ss->regs->spnd);
|
|
|
|
/* Set equence command */
|
|
writew(SPCMD_INIT2, &ss->regs->spcmd0);
|
|
|
|
/* Reset transfer and receive Buffer */
|
|
setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
|
|
|
|
/* Clear transfer and receive Buffer control bit */
|
|
clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
|
|
|
|
/* Set equence control method. Use equence0 only */
|
|
writeb(0x00, &ss->regs->spscr);
|
|
|
|
/* Enable SPI function */
|
|
setbits_8(&ss->regs->spcr, SPCR_SPE);
|
|
}
|
|
|
|
static void sh_qspi_cs_activate(struct sh_qspi_slave *ss)
|
|
{
|
|
/* Set master mode only */
|
|
writeb(SPCR_MSTR, &ss->regs->spcr);
|
|
|
|
/* Set command */
|
|
writew(SPCMD_INIT1, &ss->regs->spcmd0);
|
|
|
|
/* Reset transfer and receive Buffer */
|
|
setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
|
|
|
|
/* Clear transfer and receive Buffer control bit */
|
|
clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
|
|
|
|
/* Set equence control method. Use equence0 only */
|
|
writeb(0x00, &ss->regs->spscr);
|
|
|
|
/* Enable SPI function */
|
|
setbits_8(&ss->regs->spcr, SPCR_SPE);
|
|
}
|
|
|
|
static void sh_qspi_cs_deactivate(struct sh_qspi_slave *ss)
|
|
{
|
|
/* Disable SPI Function */
|
|
clrbits_8(&ss->regs->spcr, SPCR_SPE);
|
|
}
|
|
|
|
static int sh_qspi_xfer_common(struct sh_qspi_slave *ss, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
u32 nbyte, chunk;
|
|
int i, ret = 0;
|
|
u8 dtdata = 0, drdata;
|
|
u8 *tdata = &dtdata, *rdata = &drdata;
|
|
u32 *spbmul0 = &ss->regs->spbmul0;
|
|
|
|
if (dout == NULL && din == NULL) {
|
|
if (flags & SPI_XFER_END)
|
|
sh_qspi_cs_deactivate(ss);
|
|
return 0;
|
|
}
|
|
|
|
if (bitlen % 8) {
|
|
printf("%s: bitlen is not 8bit alined %d", __func__, bitlen);
|
|
return 1;
|
|
}
|
|
|
|
nbyte = bitlen / 8;
|
|
|
|
if (flags & SPI_XFER_BEGIN) {
|
|
sh_qspi_cs_activate(ss);
|
|
|
|
/* Set 1048576 byte */
|
|
writel(0x100000, spbmul0);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
writel(nbyte, spbmul0);
|
|
|
|
if (dout != NULL)
|
|
tdata = (u8 *)dout;
|
|
|
|
if (din != NULL)
|
|
rdata = din;
|
|
|
|
while (nbyte > 0) {
|
|
/*
|
|
* Check if there is 32 Byte chunk and if there is, transfer
|
|
* it in one burst, otherwise transfer on byte-by-byte basis.
|
|
*/
|
|
chunk = (nbyte >= 32) ? 32 : 1;
|
|
|
|
clrsetbits_8(&ss->regs->spbfcr, SPBFCR_TXTRG | SPBFCR_RXTRG,
|
|
chunk == 32 ? SPBFCR_TXTRG | SPBFCR_RXTRG : 0);
|
|
|
|
ret = wait_for_bit_8(&ss->regs->spsr, SPSR_SPTEF,
|
|
true, 1000, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < chunk; i++) {
|
|
writeb(*tdata, &ss->regs->spdr);
|
|
if (dout != NULL)
|
|
tdata++;
|
|
}
|
|
|
|
ret = wait_for_bit_8(&ss->regs->spsr, SPSR_SPRFF,
|
|
true, 1000, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < chunk; i++) {
|
|
*rdata = readb(&ss->regs->spdr);
|
|
if (din != NULL)
|
|
rdata++;
|
|
}
|
|
|
|
nbyte -= chunk;
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
sh_qspi_cs_deactivate(ss);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_SPI
|
|
static inline struct sh_qspi_slave *to_sh_qspi(struct spi_slave *slave)
|
|
{
|
|
return container_of(slave, struct sh_qspi_slave, slave);
|
|
}
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
struct sh_qspi_slave *ss = to_sh_qspi(slave);
|
|
|
|
sh_qspi_cs_activate(ss);
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
struct sh_qspi_slave *ss = to_sh_qspi(slave);
|
|
|
|
sh_qspi_cs_deactivate(ss);
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct sh_qspi_slave *ss;
|
|
|
|
if (!spi_cs_is_valid(bus, cs))
|
|
return NULL;
|
|
|
|
ss = spi_alloc_slave(struct sh_qspi_slave, bus, cs);
|
|
if (!ss) {
|
|
printf("SPI_error: Fail to allocate sh_qspi_slave\n");
|
|
return NULL;
|
|
}
|
|
|
|
ss->regs = (struct sh_qspi_regs *)SH_QSPI_BASE;
|
|
|
|
/* Init SH QSPI */
|
|
sh_qspi_init(ss);
|
|
|
|
return &ss->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct sh_qspi_slave *spi = to_sh_qspi(slave);
|
|
|
|
free(spi);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct sh_qspi_slave *ss = to_sh_qspi(slave);
|
|
|
|
return sh_qspi_xfer_common(ss, bitlen, dout, din, flags);
|
|
}
|
|
|
|
#else
|
|
|
|
#include <dm.h>
|
|
|
|
static int sh_qspi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct sh_qspi_slave *ss = dev_get_platdata(bus);
|
|
|
|
return sh_qspi_xfer_common(ss, bitlen, dout, din, flags);
|
|
}
|
|
|
|
static int sh_qspi_set_speed(struct udevice *dev, uint speed)
|
|
{
|
|
/* This is a SPI NOR controller, do nothing. */
|
|
return 0;
|
|
}
|
|
|
|
static int sh_qspi_set_mode(struct udevice *dev, uint mode)
|
|
{
|
|
/* This is a SPI NOR controller, do nothing. */
|
|
return 0;
|
|
}
|
|
|
|
static int sh_qspi_probe(struct udevice *dev)
|
|
{
|
|
struct sh_qspi_slave *ss = dev_get_platdata(dev);
|
|
|
|
sh_qspi_init(ss);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_qspi_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct sh_qspi_slave *plat = dev_get_platdata(dev);
|
|
|
|
plat->regs = (struct sh_qspi_regs *)dev_read_addr(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops sh_qspi_ops = {
|
|
.xfer = sh_qspi_xfer,
|
|
.set_speed = sh_qspi_set_speed,
|
|
.set_mode = sh_qspi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id sh_qspi_ids[] = {
|
|
{ .compatible = "renesas,qspi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sh_qspi) = {
|
|
.name = "sh_qspi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = sh_qspi_ids,
|
|
.ops = &sh_qspi_ops,
|
|
.ofdata_to_platdata = sh_qspi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct sh_qspi_slave),
|
|
.probe = sh_qspi_probe,
|
|
};
|
|
#endif
|