mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
cd207cde94
The GPIO_INT_ACT_LOW_SET was incorrectly handling interrupt lines higher than 7. This is due to the fact that there are two registers for total of 16 lines. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Bryan Hundven <bryanhundven@gmail.com> Cc: Michael Schwingen <rincewind@discworld.dascon.de>
548 lines
20 KiB
C
548 lines
20 KiB
C
/*
|
|
* include/asm-arm/arch-ixp425/ixp425.h
|
|
*
|
|
* Register definitions for IXP425
|
|
*
|
|
* Copyright (C) 2002 Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#ifndef _ASM_ARM_IXP425_H_
|
|
#define _ASM_ARM_IXP425_H_
|
|
|
|
#define BIT(x) (1<<(x))
|
|
|
|
/* FIXME: Only this does work for u-boot... find out why... [RS] */
|
|
#define UBOOT_REG_FIX 1
|
|
#ifdef UBOOT_REG_FIX
|
|
# undef io_p2v
|
|
# undef __REG
|
|
# ifndef __ASSEMBLY__
|
|
# define io_p2v(PhAdd) (PhAdd)
|
|
# define __REG(x) (*((volatile u32 *)io_p2v(x)))
|
|
# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
|
|
# else
|
|
# define __REG(x) (x)
|
|
# endif
|
|
#endif /* UBOOT_REG_FIX */
|
|
|
|
/*
|
|
*
|
|
* IXP425 Memory map:
|
|
*
|
|
* Phy Phy Size Map Size Virt Description
|
|
* =========================================================================
|
|
*
|
|
* 0x00000000 0x10000000 SDRAM 1
|
|
*
|
|
* 0x10000000 0x10000000 SDRAM 2
|
|
*
|
|
* 0x20000000 0x10000000 SDRAM 3
|
|
*
|
|
* 0x30000000 0x10000000 SDRAM 4
|
|
*
|
|
* The above four are aliases to the same memory location (0x00000000)
|
|
*
|
|
* 0x48000000 0x4000000 PCI Memory
|
|
*
|
|
* 0x50000000 0x10000000 Not Mapped EXP BUS
|
|
*
|
|
* 0x6000000 0x00004000 0x4000 0xFFFEB000 QMgr
|
|
*
|
|
* 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG
|
|
*
|
|
* 0xC4000000 0x100 0x1000 0xFFFDE000 EXP CFG
|
|
*
|
|
* 0xC8000000 0xC000 0xC000 0xFFFDF000 PERIPHERAL
|
|
*
|
|
* 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG
|
|
*/
|
|
|
|
/*
|
|
* SDRAM
|
|
*/
|
|
#define IXP425_SDRAM_BASE (0x00000000)
|
|
#define IXP425_SDRAM_BASE_ALT (0x10000000)
|
|
|
|
|
|
/*
|
|
* PCI Configuration space
|
|
*/
|
|
#define IXP425_PCI_CFG_BASE_PHYS (0xC0000000)
|
|
#define IXP425_PCI_CFG_REGION_SIZE (0x00001000)
|
|
|
|
/*
|
|
* Expansion BUS Configuration registers
|
|
*/
|
|
#define IXP425_EXP_CFG_BASE_PHYS (0xC4000000)
|
|
#define IXP425_EXP_CFG_REGION_SIZE (0x00001000)
|
|
|
|
/*
|
|
* Peripheral space
|
|
*/
|
|
#define IXP425_PERIPHERAL_BASE_PHYS (0xC8000000)
|
|
#define IXP425_PERIPHERAL_REGION_SIZE (0x0000C000)
|
|
|
|
/*
|
|
* SDRAM configuration registers
|
|
*/
|
|
#define IXP425_SDRAM_CFG_BASE_PHYS (0xCC000000)
|
|
|
|
/*
|
|
* Q Manager space .. not static mapped
|
|
*/
|
|
#define IXP425_QMGR_BASE_PHYS (0x60000000)
|
|
#define IXP425_QMGR_REGION_SIZE (0x00004000)
|
|
|
|
/*
|
|
* Expansion BUS
|
|
*
|
|
* Expansion Bus 'lives' at either base1 or base 2 depending on the value of
|
|
* Exp Bus config registers:
|
|
*
|
|
* Setting bit 31 of IXP425_EXP_CFG0 puts SDRAM at zero,
|
|
* and The expansion bus to IXP425_EXP_BUS_BASE2
|
|
*/
|
|
#define IXP425_EXP_BUS_BASE1_PHYS (0x00000000)
|
|
#define IXP425_EXP_BUS_BASE2_PHYS (0x50000000)
|
|
|
|
#define IXP425_EXP_BUS_BASE_PHYS IXP425_EXP_BUS_BASE2_PHYS
|
|
|
|
#define IXP425_EXP_BUS_REGION_SIZE (0x08000000)
|
|
#define IXP425_EXP_BUS_CSX_REGION_SIZE (0x01000000)
|
|
|
|
#define IXP425_EXP_BUS_CS0_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x00000000)
|
|
#define IXP425_EXP_BUS_CS1_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x01000000)
|
|
#define IXP425_EXP_BUS_CS2_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x02000000)
|
|
#define IXP425_EXP_BUS_CS3_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x03000000)
|
|
#define IXP425_EXP_BUS_CS4_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x04000000)
|
|
#define IXP425_EXP_BUS_CS5_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x05000000)
|
|
#define IXP425_EXP_BUS_CS6_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x06000000)
|
|
#define IXP425_EXP_BUS_CS7_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x07000000)
|
|
|
|
#define IXP425_FLASH_WRITABLE (0x2)
|
|
#define IXP425_FLASH_DEFAULT (0xbcd23c40)
|
|
#define IXP425_FLASH_WRITE (0xbcd23c42)
|
|
|
|
#define IXP425_EXP_CS0_OFFSET 0x00
|
|
#define IXP425_EXP_CS1_OFFSET 0x04
|
|
#define IXP425_EXP_CS2_OFFSET 0x08
|
|
#define IXP425_EXP_CS3_OFFSET 0x0C
|
|
#define IXP425_EXP_CS4_OFFSET 0x10
|
|
#define IXP425_EXP_CS5_OFFSET 0x14
|
|
#define IXP425_EXP_CS6_OFFSET 0x18
|
|
#define IXP425_EXP_CS7_OFFSET 0x1C
|
|
#define IXP425_EXP_CFG0_OFFSET 0x20
|
|
#define IXP425_EXP_CFG1_OFFSET 0x24
|
|
#define IXP425_EXP_CFG2_OFFSET 0x28
|
|
#define IXP425_EXP_CFG3_OFFSET 0x2C
|
|
|
|
/*
|
|
* Expansion Bus Controller registers.
|
|
*/
|
|
#ifndef __ASSEMBLY__
|
|
#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_PHYS+(x)))
|
|
#else
|
|
#define IXP425_EXP_REG(x) (IXP425_EXP_CFG_BASE_PHYS+(x))
|
|
#endif
|
|
|
|
#define IXP425_EXP_CS0 IXP425_EXP_REG(IXP425_EXP_CS0_OFFSET)
|
|
#define IXP425_EXP_CS1 IXP425_EXP_REG(IXP425_EXP_CS1_OFFSET)
|
|
#define IXP425_EXP_CS2 IXP425_EXP_REG(IXP425_EXP_CS2_OFFSET)
|
|
#define IXP425_EXP_CS3 IXP425_EXP_REG(IXP425_EXP_CS3_OFFSET)
|
|
#define IXP425_EXP_CS4 IXP425_EXP_REG(IXP425_EXP_CS4_OFFSET)
|
|
#define IXP425_EXP_CS5 IXP425_EXP_REG(IXP425_EXP_CS5_OFFSET)
|
|
#define IXP425_EXP_CS6 IXP425_EXP_REG(IXP425_EXP_CS6_OFFSET)
|
|
#define IXP425_EXP_CS7 IXP425_EXP_REG(IXP425_EXP_CS7_OFFSET)
|
|
|
|
#define IXP425_EXP_CFG0 IXP425_EXP_REG(IXP425_EXP_CFG0_OFFSET)
|
|
#define IXP425_EXP_CFG1 IXP425_EXP_REG(IXP425_EXP_CFG1_OFFSET)
|
|
#define IXP425_EXP_CFG2 IXP425_EXP_REG(IXP425_EXP_CFG2_OFFSET)
|
|
#define IXP425_EXP_CFG3 IXP425_EXP_REG(IXP425_EXP_CFG3_OFFSET)
|
|
|
|
/*
|
|
* SDRAM Controller registers.
|
|
*/
|
|
#define IXP425_SDR_CONFIG_OFFSET 0x00
|
|
#define IXP425_SDR_REFRESH_OFFSET 0x04
|
|
#define IXP425_SDR_IR_OFFSET 0x08
|
|
|
|
#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x))
|
|
|
|
#define IXP425_SDR_CONFIG IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET)
|
|
#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
|
|
#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
|
|
|
|
/*
|
|
* UART registers
|
|
*/
|
|
#define IXP425_UART1 0
|
|
#define IXP425_UART2 0x1000
|
|
|
|
#define IXP425_UART_RBR_OFFSET 0x00
|
|
#define IXP425_UART_THR_OFFSET 0x00
|
|
#define IXP425_UART_DLL_OFFSET 0x00
|
|
#define IXP425_UART_IER_OFFSET 0x04
|
|
#define IXP425_UART_DLH_OFFSET 0x04
|
|
#define IXP425_UART_IIR_OFFSET 0x08
|
|
#define IXP425_UART_FCR_OFFSET 0x00
|
|
#define IXP425_UART_LCR_OFFSET 0x0c
|
|
#define IXP425_UART_MCR_OFFSET 0x10
|
|
#define IXP425_UART_LSR_OFFSET 0x14
|
|
#define IXP425_UART_MSR_OFFSET 0x18
|
|
#define IXP425_UART_SPR_OFFSET 0x1c
|
|
#define IXP425_UART_ISR_OFFSET 0x20
|
|
|
|
#define IXP425_UART_CFG_BASE_PHYS (0xc8000000)
|
|
|
|
#define RBR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_RBR_OFFSET)
|
|
#define THR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_THR_OFFSET)
|
|
#define DLL(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLL_OFFSET)
|
|
#define IER(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IER_OFFSET)
|
|
#define DLH(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLH_OFFSET)
|
|
#define IIR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IIR_OFFSET)
|
|
#define FCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_FCR_OFFSET)
|
|
#define LCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LCR_OFFSET)
|
|
#define MCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MCR_OFFSET)
|
|
#define LSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LSR_OFFSET)
|
|
#define MSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MSR_OFFSET)
|
|
#define SPR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_SPR_OFFSET)
|
|
#define ISR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_ISR_OFFSET)
|
|
|
|
#define IER_DMAE (1 << 7) /* DMA Requests Enable */
|
|
#define IER_UUE (1 << 6) /* UART Unit Enable */
|
|
#define IER_NRZE (1 << 5) /* NRZ coding Enable */
|
|
#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
|
|
#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
|
|
#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
|
|
#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
|
|
#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
|
|
|
|
#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
|
|
#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
|
|
#define IIR_TOD (1 << 3) /* Time Out Detected */
|
|
#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
|
|
#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
|
|
#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
|
|
|
|
#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
|
|
#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
|
|
#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
|
|
#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
|
|
#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
|
|
#define FCR_ITL_1 (0)
|
|
#define FCR_ITL_8 (FCR_ITL1)
|
|
#define FCR_ITL_16 (FCR_ITL2)
|
|
#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
|
|
|
|
#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
|
|
#define LCR_SB (1 << 6) /* Set Break */
|
|
#define LCR_STKYP (1 << 5) /* Sticky Parity */
|
|
#define LCR_EPS (1 << 4) /* Even Parity Select */
|
|
#define LCR_PEN (1 << 3) /* Parity Enable */
|
|
#define LCR_STB (1 << 2) /* Stop Bit */
|
|
#define LCR_WLS1 (1 << 1) /* Word Length Select */
|
|
#define LCR_WLS0 (1 << 0) /* Word Length Select */
|
|
|
|
#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
|
|
#define LSR_TEMT (1 << 6) /* Transmitter Empty */
|
|
#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
|
|
#define LSR_BI (1 << 4) /* Break Interrupt */
|
|
#define LSR_FE (1 << 3) /* Framing Error */
|
|
#define LSR_PE (1 << 2) /* Parity Error */
|
|
#define LSR_OE (1 << 1) /* Overrun Error */
|
|
#define LSR_DR (1 << 0) /* Data Ready */
|
|
|
|
#define MCR_LOOP (1 << 4) */
|
|
#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
|
|
#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
|
|
#define MCR_RTS (1 << 1) /* Request to Send */
|
|
#define MCR_DTR (1 << 0) /* Data Terminal Ready */
|
|
|
|
#define MSR_DCD (1 << 7) /* Data Carrier Detect */
|
|
#define MSR_RI (1 << 6) /* Ring Indicator */
|
|
#define MSR_DSR (1 << 5) /* Data Set Ready */
|
|
#define MSR_CTS (1 << 4) /* Clear To Send */
|
|
#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
|
|
#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
|
|
#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
|
|
#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
|
|
|
|
#define IXP425_CONSOLE_UART_BASE_PHYS IXP425_UART1_BASE_PHYS
|
|
/*
|
|
* Peripheral Space Registers
|
|
*/
|
|
#define IXP425_UART1_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x0000)
|
|
#define IXP425_UART2_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x1000)
|
|
#define IXP425_PMU_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x2000)
|
|
#define IXP425_INTC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x3000)
|
|
#define IXP425_GPIO_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x4000)
|
|
#define IXP425_TIMER_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x5000)
|
|
#define IXP425_NPEA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x6000)
|
|
#define IXP425_NPEB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x7000)
|
|
#define IXP425_NPEC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x8000)
|
|
#define IXP425_EthA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x9000)
|
|
#define IXP425_EthB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xA000)
|
|
#define IXP425_USB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xB000)
|
|
|
|
/*
|
|
* UART Register Definitions , Offsets only as there are 2 UARTS.
|
|
* IXP425_UART1_BASE , IXP425_UART2_BASE.
|
|
*/
|
|
|
|
#undef UART_NO_RX_INTERRUPT
|
|
|
|
#define IXP425_UART_XTAL 14745600
|
|
|
|
/*
|
|
* Constants to make it easy to access Interrupt Controller registers
|
|
*/
|
|
#define IXP425_ICPR_OFFSET 0x00 /* Interrupt Status */
|
|
#define IXP425_ICMR_OFFSET 0x04 /* Interrupt Enable */
|
|
#define IXP425_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
|
|
#define IXP425_ICIP_OFFSET 0x0C /* IRQ Status */
|
|
#define IXP425_ICFP_OFFSET 0x10 /* FIQ Status */
|
|
#define IXP425_ICHR_OFFSET 0x14 /* Interrupt Priority */
|
|
#define IXP425_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
|
|
#define IXP425_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
|
|
|
|
#define N_IRQS 32
|
|
#define IXP425_TIMER_2_IRQ 11
|
|
|
|
/*
|
|
* Interrupt Controller Register Definitions.
|
|
*/
|
|
#ifndef __ASSEMBLY__
|
|
#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_PHYS+(x)))
|
|
#else
|
|
#define IXP425_INTC_REG(x) (IXP425_INTC_BASE_PHYS+(x))
|
|
#endif
|
|
|
|
#define IXP425_ICPR IXP425_INTC_REG(IXP425_ICPR_OFFSET)
|
|
#define IXP425_ICMR IXP425_INTC_REG(IXP425_ICMR_OFFSET)
|
|
#define IXP425_ICLR IXP425_INTC_REG(IXP425_ICLR_OFFSET)
|
|
#define IXP425_ICIP IXP425_INTC_REG(IXP425_ICIP_OFFSET)
|
|
#define IXP425_ICFP IXP425_INTC_REG(IXP425_ICFP_OFFSET)
|
|
#define IXP425_ICHR IXP425_INTC_REG(IXP425_ICHR_OFFSET)
|
|
#define IXP425_ICIH IXP425_INTC_REG(IXP425_ICIH_OFFSET)
|
|
#define IXP425_ICFH IXP425_INTC_REG(IXP425_ICFH_OFFSET)
|
|
|
|
/*
|
|
* Constants to make it easy to access GPIO registers
|
|
*/
|
|
#define IXP425_GPIO_GPOUTR_OFFSET 0x00
|
|
#define IXP425_GPIO_GPOER_OFFSET 0x04
|
|
#define IXP425_GPIO_GPINR_OFFSET 0x08
|
|
#define IXP425_GPIO_GPISR_OFFSET 0x0C
|
|
#define IXP425_GPIO_GPIT1R_OFFSET 0x10
|
|
#define IXP425_GPIO_GPIT2R_OFFSET 0x14
|
|
#define IXP425_GPIO_GPCLKR_OFFSET 0x18
|
|
#define IXP425_GPIO_GPDBSELR_OFFSET 0x1C
|
|
|
|
/*
|
|
* GPIO Register Definitions.
|
|
* [Only perform 32bit reads/writes]
|
|
*/
|
|
#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_PHYS+(x)))
|
|
|
|
#define IXP425_GPIO_GPOUTR IXP425_GPIO_REG(IXP425_GPIO_GPOUTR_OFFSET)
|
|
#define IXP425_GPIO_GPOER IXP425_GPIO_REG(IXP425_GPIO_GPOER_OFFSET)
|
|
#define IXP425_GPIO_GPINR IXP425_GPIO_REG(IXP425_GPIO_GPINR_OFFSET)
|
|
#define IXP425_GPIO_GPISR IXP425_GPIO_REG(IXP425_GPIO_GPISR_OFFSET)
|
|
#define IXP425_GPIO_GPIT1R IXP425_GPIO_REG(IXP425_GPIO_GPIT1R_OFFSET)
|
|
#define IXP425_GPIO_GPIT2R IXP425_GPIO_REG(IXP425_GPIO_GPIT2R_OFFSET)
|
|
#define IXP425_GPIO_GPCLKR IXP425_GPIO_REG(IXP425_GPIO_GPCLKR_OFFSET)
|
|
#define IXP425_GPIO_GPDBSELR IXP425_GPIO_REG(IXP425_GPIO_GPDBSELR_OFFSET)
|
|
|
|
#define IXP425_GPIO_GPITR(line) (((line) >= 8) ? \
|
|
IXP425_GPIO_GPIT2R : IXP425_GPIO_GPIT1R)
|
|
|
|
/*
|
|
* Macros to make it easy to access the GPIO registers
|
|
*/
|
|
#define GPIO_OUTPUT_ENABLE(line) *IXP425_GPIO_GPOER &= ~(1 << (line))
|
|
#define GPIO_OUTPUT_DISABLE(line) *IXP425_GPIO_GPOER |= (1 << (line))
|
|
#define GPIO_OUTPUT_SET(line) *IXP425_GPIO_GPOUTR |= (1 << (line))
|
|
#define GPIO_OUTPUT_CLEAR(line) *IXP425_GPIO_GPOUTR &= ~(1 << (line))
|
|
#define GPIO_INT_ACT_LOW_SET(line) \
|
|
*IXP425_GPIO_GPITR(line) = \
|
|
(*IXP425_GPIO_GPITR(line) & \
|
|
~(0x7 << (((line) & 0x7) * 3))) | \
|
|
(0x1 << (((line) & 0x7) * 3)) \
|
|
|
|
/*
|
|
* Constants to make it easy to access Timer Control/Status registers
|
|
*/
|
|
#define IXP425_OSTS_OFFSET 0x00 /* Continious TimeStamp */
|
|
#define IXP425_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
|
|
#define IXP425_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
|
|
#define IXP425_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
|
|
#define IXP425_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
|
|
#define IXP425_OSWT_OFFSET 0x14 /* Watchdog Timer */
|
|
#define IXP425_OSWE_OFFSET 0x18 /* Watchdog Enable */
|
|
#define IXP425_OSWK_OFFSET 0x1C /* Watchdog Key */
|
|
#define IXP425_OSST_OFFSET 0x20 /* Timer Status */
|
|
|
|
/*
|
|
* Operating System Timer Register Definitions.
|
|
*/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#define IXP425_TIMER_REG(x) ((volatile u32 *)(IXP425_TIMER_BASE_PHYS+(x)))
|
|
#else
|
|
#define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x))
|
|
#endif
|
|
|
|
/* _B to avoid collision: also defined in npe/include/... */
|
|
#define IXP425_OSTS_B IXP425_TIMER_REG(IXP425_OSTS_OFFSET)
|
|
#define IXP425_OST1 IXP425_TIMER_REG(IXP425_OST1_OFFSET)
|
|
#define IXP425_OSRT1 IXP425_TIMER_REG(IXP425_OSRT1_OFFSET)
|
|
#define IXP425_OST2 IXP425_TIMER_REG(IXP425_OST2_OFFSET)
|
|
#define IXP425_OSRT2 IXP425_TIMER_REG(IXP425_OSRT2_OFFSET)
|
|
#define IXP425_OSWT IXP425_TIMER_REG(IXP425_OSWT_OFFSET)
|
|
#define IXP425_OSWE IXP425_TIMER_REG(IXP425_OSWE_OFFSET)
|
|
#define IXP425_OSWK IXP425_TIMER_REG(IXP425_OSWK_OFFSET)
|
|
#define IXP425_OSST IXP425_TIMER_REG(IXP425_OSST_OFFSET)
|
|
|
|
/*
|
|
* Timer register values and bit definitions
|
|
*/
|
|
#define IXP425_OST_ENABLE BIT(0)
|
|
#define IXP425_OST_ONE_SHOT BIT(1)
|
|
/* Low order bits of reload value ignored */
|
|
#define IXP425_OST_RELOAD_MASK (0x3)
|
|
#define IXP425_OST_DISABLED (0x0)
|
|
#define IXP425_OSST_TIMER_1_PEND BIT(0)
|
|
#define IXP425_OSST_TIMER_2_PEND BIT(1)
|
|
#define IXP425_OSST_TIMER_TS_PEND BIT(2)
|
|
#define IXP425_OSST_TIMER_WDOG_PEND BIT(3)
|
|
#define IXP425_OSST_TIMER_WARM_RESET BIT(4)
|
|
|
|
/*
|
|
* Constants to make it easy to access PCI Control/Status registers
|
|
*/
|
|
#define PCI_NP_AD_OFFSET 0x00
|
|
#define PCI_NP_CBE_OFFSET 0x04
|
|
#define PCI_NP_WDATA_OFFSET 0x08
|
|
#define PCI_NP_RDATA_OFFSET 0x0c
|
|
#define PCI_CRP_AD_CBE_OFFSET 0x10
|
|
#define PCI_CRP_WDATA_OFFSET 0x14
|
|
#define PCI_CRP_RDATA_OFFSET 0x18
|
|
#define PCI_CSR_OFFSET 0x1c
|
|
#define PCI_ISR_OFFSET 0x20
|
|
#define PCI_INTEN_OFFSET 0x24
|
|
#define PCI_DMACTRL_OFFSET 0x28
|
|
#define PCI_AHBMEMBASE_OFFSET 0x2c
|
|
#define PCI_AHBIOBASE_OFFSET 0x30
|
|
#define PCI_PCIMEMBASE_OFFSET 0x34
|
|
#define PCI_AHBDOORBELL_OFFSET 0x38
|
|
#define PCI_PCIDOORBELL_OFFSET 0x3C
|
|
#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
|
|
#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
|
|
#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
|
|
#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
|
|
#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
|
|
#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
|
|
|
|
/*
|
|
* PCI Control/Status Registers
|
|
*/
|
|
#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_PHYS+(x)))
|
|
|
|
#define PCI_NP_AD IXP425_PCI_CSR(PCI_NP_AD_OFFSET)
|
|
#define PCI_NP_CBE IXP425_PCI_CSR(PCI_NP_CBE_OFFSET)
|
|
#define PCI_NP_WDATA IXP425_PCI_CSR(PCI_NP_WDATA_OFFSET)
|
|
#define PCI_NP_RDATA IXP425_PCI_CSR(PCI_NP_RDATA_OFFSET)
|
|
#define PCI_CRP_AD_CBE IXP425_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
|
|
#define PCI_CRP_WDATA IXP425_PCI_CSR(PCI_CRP_WDATA_OFFSET)
|
|
#define PCI_CRP_RDATA IXP425_PCI_CSR(PCI_CRP_RDATA_OFFSET)
|
|
#define PCI_CSR IXP425_PCI_CSR(PCI_CSR_OFFSET)
|
|
#define PCI_ISR IXP425_PCI_CSR(PCI_ISR_OFFSET)
|
|
#define PCI_INTEN IXP425_PCI_CSR(PCI_INTEN_OFFSET)
|
|
#define PCI_DMACTRL IXP425_PCI_CSR(PCI_DMACTRL_OFFSET)
|
|
#define PCI_AHBMEMBASE IXP425_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
|
|
#define PCI_AHBIOBASE IXP425_PCI_CSR(PCI_AHBIOBASE_OFFSET)
|
|
#define PCI_PCIMEMBASE IXP425_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
|
|
#define PCI_AHBDOORBELL IXP425_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
|
|
#define PCI_PCIDOORBELL IXP425_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
|
|
#define PCI_ATPDMA0_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
|
|
#define PCI_ATPDMA0_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
|
|
#define PCI_ATPDMA0_LENADDR IXP425_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
|
|
#define PCI_ATPDMA1_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
|
|
#define PCI_ATPDMA1_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
|
|
#define PCI_ATPDMA1_LENADDR IXP425_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
|
|
|
|
/*
|
|
* PCI register values and bit definitions
|
|
*/
|
|
|
|
/* CSR bit definitions */
|
|
#define PCI_CSR_HOST BIT(0)
|
|
#define PCI_CSR_ARBEN BIT(1)
|
|
#define PCI_CSR_ADS BIT(2)
|
|
#define PCI_CSR_PDS BIT(3)
|
|
#define PCI_CSR_ABE BIT(4)
|
|
#define PCI_CSR_DBT BIT(5)
|
|
#define PCI_CSR_ASE BIT(8)
|
|
#define PCI_CSR_IC BIT(15)
|
|
|
|
/* ISR (Interrupt status) Register bit definitions */
|
|
#define PCI_ISR_PSE BIT(0)
|
|
#define PCI_ISR_PFE BIT(1)
|
|
#define PCI_ISR_PPE BIT(2)
|
|
#define PCI_ISR_AHBE BIT(3)
|
|
#define PCI_ISR_APDC BIT(4)
|
|
#define PCI_ISR_PADC BIT(5)
|
|
#define PCI_ISR_ADB BIT(6)
|
|
#define PCI_ISR_PDB BIT(7)
|
|
|
|
/* INTEN (Interrupt Enable) Register bit definitions */
|
|
#define PCI_INTEN_PSE BIT(0)
|
|
#define PCI_INTEN_PFE BIT(1)
|
|
#define PCI_INTEN_PPE BIT(2)
|
|
#define PCI_INTEN_AHBE BIT(3)
|
|
#define PCI_INTEN_APDC BIT(4)
|
|
#define PCI_INTEN_PADC BIT(5)
|
|
#define PCI_INTEN_ADB BIT(6)
|
|
#define PCI_INTEN_PDB BIT(7)
|
|
|
|
/*
|
|
* Shift value for byte enable on NP cmd/byte enable register
|
|
*/
|
|
#define IXP425_PCI_NP_CBE_BESL 4
|
|
|
|
/*
|
|
* PCI commands supported by NP access unit
|
|
*/
|
|
#define NP_CMD_IOREAD 0x2
|
|
#define NP_CMD_IOWRITE 0x3
|
|
#define NP_CMD_CONFIGREAD 0xa
|
|
#define NP_CMD_CONFIGWRITE 0xb
|
|
#define NP_CMD_MEMREAD 0x6
|
|
#define NP_CMD_MEMWRITE 0x7
|
|
|
|
#if 0
|
|
#ifndef __ASSEMBLY__
|
|
extern int ixp425_pci_read(u32 addr, u32 cmd, u32* data);
|
|
extern int ixp425_pci_write(u32 addr, u32 cmd, u32 data);
|
|
extern void ixp425_pci_init(void *);
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* Constants for CRP access into local config space
|
|
*/
|
|
#define CRP_AD_CBE_BESL 20
|
|
#define CRP_AD_CBE_WRITE BIT(16)
|
|
|
|
/*
|
|
* Clock Speed Definitions.
|
|
*/
|
|
#define IXP425_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
|
|
|
|
|
|
#endif
|