mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
496ba48f5e
i2c_probe() is changed to reinit the i2c bus upon read failure. This is naturally the case upon i2c bus probing. Also, some printf messages upon read failure are removed. As they would interfere with the "i2c probe" command. Additionally, i2c_set_bus_speed() now returns 0, so that the "i2c speed" command can be used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Amit Virdi <amit.virdi@st.com> Cc: Vipin Kumar <vipin.kumar@st.com>
346 lines
7.2 KiB
C
346 lines
7.2 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include "designware_i2c.h"
|
|
|
|
static struct i2c_regs *const i2c_regs_p =
|
|
(struct i2c_regs *)CONFIG_SYS_I2C_BASE;
|
|
|
|
/*
|
|
* set_speed - Set the i2c speed mode (standard, high, fast)
|
|
* @i2c_spd: required i2c speed mode
|
|
*
|
|
* Set the i2c speed mode (standard, high, fast)
|
|
*/
|
|
static void set_speed(int i2c_spd)
|
|
{
|
|
unsigned int cntl;
|
|
unsigned int hcnt, lcnt;
|
|
unsigned int high, low;
|
|
unsigned int enbl;
|
|
|
|
/* to set speed cltr must be disabled */
|
|
enbl = readl(&i2c_regs_p->ic_enable);
|
|
enbl &= ~IC_ENABLE_0B;
|
|
writel(enbl, &i2c_regs_p->ic_enable);
|
|
|
|
|
|
cntl = (readl(&i2c_regs_p->ic_con) & (~IC_CON_SPD_MSK));
|
|
|
|
switch (i2c_spd) {
|
|
case IC_SPEED_MODE_MAX:
|
|
cntl |= IC_CON_SPD_HS;
|
|
high = MIN_HS_SCL_HIGHTIME;
|
|
low = MIN_HS_SCL_LOWTIME;
|
|
break;
|
|
|
|
case IC_SPEED_MODE_STANDARD:
|
|
cntl |= IC_CON_SPD_SS;
|
|
high = MIN_SS_SCL_HIGHTIME;
|
|
low = MIN_SS_SCL_LOWTIME;
|
|
break;
|
|
|
|
case IC_SPEED_MODE_FAST:
|
|
default:
|
|
cntl |= IC_CON_SPD_FS;
|
|
high = MIN_FS_SCL_HIGHTIME;
|
|
low = MIN_FS_SCL_LOWTIME;
|
|
break;
|
|
}
|
|
|
|
writel(cntl, &i2c_regs_p->ic_con);
|
|
|
|
hcnt = (IC_CLK * high) / NANO_TO_MICRO;
|
|
writel(hcnt, &i2c_regs_p->ic_fs_scl_hcnt);
|
|
|
|
lcnt = (IC_CLK * low) / NANO_TO_MICRO;
|
|
writel(lcnt, &i2c_regs_p->ic_fs_scl_lcnt);
|
|
|
|
/* re-enable i2c ctrl back now that speed is set */
|
|
enbl |= IC_ENABLE_0B;
|
|
writel(enbl, &i2c_regs_p->ic_enable);
|
|
}
|
|
|
|
/*
|
|
* i2c_set_bus_speed - Set the i2c speed
|
|
* @speed: required i2c speed
|
|
*
|
|
* Set the i2c speed.
|
|
*/
|
|
int i2c_set_bus_speed(int speed)
|
|
{
|
|
if (speed >= I2C_MAX_SPEED)
|
|
set_speed(IC_SPEED_MODE_MAX);
|
|
else if (speed >= I2C_FAST_SPEED)
|
|
set_speed(IC_SPEED_MODE_FAST);
|
|
else
|
|
set_speed(IC_SPEED_MODE_STANDARD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* i2c_get_bus_speed - Gets the i2c speed
|
|
*
|
|
* Gets the i2c speed.
|
|
*/
|
|
int i2c_get_bus_speed(void)
|
|
{
|
|
u32 cntl;
|
|
|
|
cntl = (readl(&i2c_regs_p->ic_con) & IC_CON_SPD_MSK);
|
|
|
|
if (cntl == IC_CON_SPD_HS)
|
|
return I2C_MAX_SPEED;
|
|
else if (cntl == IC_CON_SPD_FS)
|
|
return I2C_FAST_SPEED;
|
|
else if (cntl == IC_CON_SPD_SS)
|
|
return I2C_STANDARD_SPEED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* i2c_init - Init function
|
|
* @speed: required i2c speed
|
|
* @slaveadd: slave address for the device
|
|
*
|
|
* Initialization function.
|
|
*/
|
|
void i2c_init(int speed, int slaveadd)
|
|
{
|
|
unsigned int enbl;
|
|
|
|
/* Disable i2c */
|
|
enbl = readl(&i2c_regs_p->ic_enable);
|
|
enbl &= ~IC_ENABLE_0B;
|
|
writel(enbl, &i2c_regs_p->ic_enable);
|
|
|
|
writel((IC_CON_SD | IC_CON_SPD_FS | IC_CON_MM), &i2c_regs_p->ic_con);
|
|
writel(IC_RX_TL, &i2c_regs_p->ic_rx_tl);
|
|
writel(IC_TX_TL, &i2c_regs_p->ic_tx_tl);
|
|
i2c_set_bus_speed(speed);
|
|
writel(IC_STOP_DET, &i2c_regs_p->ic_intr_mask);
|
|
writel(slaveadd, &i2c_regs_p->ic_sar);
|
|
|
|
/* Enable i2c */
|
|
enbl = readl(&i2c_regs_p->ic_enable);
|
|
enbl |= IC_ENABLE_0B;
|
|
writel(enbl, &i2c_regs_p->ic_enable);
|
|
}
|
|
|
|
/*
|
|
* i2c_setaddress - Sets the target slave address
|
|
* @i2c_addr: target i2c address
|
|
*
|
|
* Sets the target slave address.
|
|
*/
|
|
static void i2c_setaddress(unsigned int i2c_addr)
|
|
{
|
|
writel(i2c_addr, &i2c_regs_p->ic_tar);
|
|
}
|
|
|
|
/*
|
|
* i2c_flush_rxfifo - Flushes the i2c RX FIFO
|
|
*
|
|
* Flushes the i2c RX FIFO
|
|
*/
|
|
static void i2c_flush_rxfifo(void)
|
|
{
|
|
while (readl(&i2c_regs_p->ic_status) & IC_STATUS_RFNE)
|
|
readl(&i2c_regs_p->ic_cmd_data);
|
|
}
|
|
|
|
/*
|
|
* i2c_wait_for_bb - Waits for bus busy
|
|
*
|
|
* Waits for bus busy
|
|
*/
|
|
static int i2c_wait_for_bb(void)
|
|
{
|
|
unsigned long start_time_bb = get_timer(0);
|
|
|
|
while ((readl(&i2c_regs_p->ic_status) & IC_STATUS_MA) ||
|
|
!(readl(&i2c_regs_p->ic_status) & IC_STATUS_TFE)) {
|
|
|
|
/* Evaluate timeout */
|
|
if (get_timer(start_time_bb) > (unsigned long)(I2C_BYTE_TO_BB))
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* check parameters for i2c_read and i2c_write */
|
|
static int check_params(uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
if (buffer == NULL) {
|
|
printf("Buffer is invalid\n");
|
|
return 1;
|
|
}
|
|
|
|
if (alen > 1) {
|
|
printf("addr len %d not supported\n", alen);
|
|
return 1;
|
|
}
|
|
|
|
if (addr + len > 256) {
|
|
printf("address out of range\n");
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_xfer_init(uchar chip, uint addr)
|
|
{
|
|
if (i2c_wait_for_bb())
|
|
return 1;
|
|
|
|
i2c_setaddress(chip);
|
|
writel(addr, &i2c_regs_p->ic_cmd_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_xfer_finish(void)
|
|
{
|
|
ulong start_stop_det = get_timer(0);
|
|
|
|
while (1) {
|
|
if ((readl(&i2c_regs_p->ic_raw_intr_stat) & IC_STOP_DET)) {
|
|
readl(&i2c_regs_p->ic_clr_stop_det);
|
|
break;
|
|
} else if (get_timer(start_stop_det) > I2C_STOPDET_TO) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i2c_wait_for_bb()) {
|
|
printf("Timed out waiting for bus\n");
|
|
return 1;
|
|
}
|
|
|
|
i2c_flush_rxfifo();
|
|
|
|
/* Wait for read/write operation to complete on actual memory */
|
|
udelay(10000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* i2c_read - Read from i2c memory
|
|
* @chip: target i2c address
|
|
* @addr: address to read from
|
|
* @alen:
|
|
* @buffer: buffer for read data
|
|
* @len: no of bytes to be read
|
|
*
|
|
* Read from i2c memory.
|
|
*/
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
unsigned long start_time_rx;
|
|
|
|
if (check_params(addr, alen, buffer, len))
|
|
return 1;
|
|
|
|
if (i2c_xfer_init(chip, addr))
|
|
return 1;
|
|
|
|
start_time_rx = get_timer(0);
|
|
while (len) {
|
|
writel(IC_CMD, &i2c_regs_p->ic_cmd_data);
|
|
|
|
if (readl(&i2c_regs_p->ic_status) & IC_STATUS_RFNE) {
|
|
*buffer++ = (uchar)readl(&i2c_regs_p->ic_cmd_data);
|
|
len--;
|
|
start_time_rx = get_timer(0);
|
|
|
|
} else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return i2c_xfer_finish();
|
|
}
|
|
|
|
/*
|
|
* i2c_write - Write to i2c memory
|
|
* @chip: target i2c address
|
|
* @addr: address to read from
|
|
* @alen:
|
|
* @buffer: buffer for read data
|
|
* @len: no of bytes to be read
|
|
*
|
|
* Write to i2c memory.
|
|
*/
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
int nb = len;
|
|
unsigned long start_time_tx;
|
|
|
|
if (check_params(addr, alen, buffer, len))
|
|
return 1;
|
|
|
|
if (i2c_xfer_init(chip, addr))
|
|
return 1;
|
|
|
|
start_time_tx = get_timer(0);
|
|
while (len) {
|
|
if (readl(&i2c_regs_p->ic_status) & IC_STATUS_TFNF) {
|
|
writel(*buffer, &i2c_regs_p->ic_cmd_data);
|
|
buffer++;
|
|
len--;
|
|
start_time_tx = get_timer(0);
|
|
|
|
} else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
|
|
printf("Timed out. i2c write Failed\n");
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return i2c_xfer_finish();
|
|
}
|
|
|
|
/*
|
|
* i2c_probe - Probe the i2c chip
|
|
*/
|
|
int i2c_probe(uchar chip)
|
|
{
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
/*
|
|
* Try to read the first location of the chip.
|
|
*/
|
|
ret = i2c_read(chip, 0, 1, (uchar *)&tmp, 1);
|
|
if (ret)
|
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
|
|
return ret;
|
|
}
|