u-boot/drivers/firmware/firmware-zynqmp.c
Ashok Reddy Soma 3f9c23905c firmware: Remove probe which is causing extra bind
Remove probe function dm_scan_fdt_dev from zynqmp-firmware driver.
It is just binding its subnode zynqmp-clk.
As a result one extra node is showing up in dm tree.

This is not required, it is anyway bound from it's own zynqmp-clk driver.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00

191 lines
4.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Xilinx Zynq MPSoC Firmware driver
*
* Copyright (C) 2018-2019 Xilinx, Inc.
*/
#include <common.h>
#include <dm.h>
#include <zynqmp_firmware.h>
#if defined(CONFIG_ZYNQMP_IPI)
#include <mailbox.h>
#include <asm/arch/sys_proto.h>
#define PMUFW_PAYLOAD_ARG_CNT 8
struct zynqmp_power {
struct mbox_chan tx_chan;
struct mbox_chan rx_chan;
} zynqmp_power;
static int ipi_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
{
struct zynqmp_ipi_msg msg;
int ret;
if (req_len > PMUFW_PAYLOAD_ARG_CNT ||
res_maxlen > PMUFW_PAYLOAD_ARG_CNT)
return -EINVAL;
if (!(zynqmp_power.tx_chan.dev) || !(&zynqmp_power.rx_chan.dev))
return -EINVAL;
msg.buf = (u32 *)req;
msg.len = req_len;
ret = mbox_send(&zynqmp_power.tx_chan, &msg);
if (ret) {
debug("%s: Sending message failed\n", __func__);
return ret;
}
msg.buf = res;
msg.len = res_maxlen;
ret = mbox_recv(&zynqmp_power.rx_chan, &msg, 100);
if (ret)
debug("%s: Receiving message failed\n", __func__);
return ret;
}
static int send_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
{
if (IS_ENABLED(CONFIG_SPL_BUILD))
return ipi_req(req, req_len, res, res_maxlen);
return xilinx_pm_request(req[0], 0, 0, 0, 0, res);
}
unsigned int zynqmp_firmware_version(void)
{
int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
static u32 pm_api_version = ZYNQMP_PM_VERSION_INVALID;
/*
* Get PMU version only once and later
* just return stored values instead of
* asking PMUFW again.
**/
if (pm_api_version == ZYNQMP_PM_VERSION_INVALID) {
const u32 request[] = { PM_GET_API_VERSION };
ret = send_req(request, ARRAY_SIZE(request), ret_payload, 2);
if (ret)
panic("PMUFW is not found - Please load it!\n");
pm_api_version = ret_payload[1];
if (pm_api_version < ZYNQMP_PM_VERSION)
panic("PMUFW version error. Expected: v%d.%d\n",
ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR);
}
return pm_api_version;
};
/**
* Send a configuration object to the PMU firmware.
*
* @cfg_obj: Pointer to the configuration object
* @size: Size of @cfg_obj in bytes
*/
void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size)
{
const u32 request[] = {
PM_SET_CONFIGURATION,
(u32)((u64)cfg_obj)
};
u32 response;
int err;
printf("Loading new PMUFW cfg obj (%ld bytes)\n", size);
err = send_req(request, ARRAY_SIZE(request), &response, 1);
if (err)
panic("Cannot load PMUFW configuration object (%d)\n", err);
if (response != 0)
panic("PMUFW returned 0x%08x status!\n", response);
}
static int zynqmp_power_probe(struct udevice *dev)
{
int ret;
debug("%s, (dev=%p)\n", __func__, dev);
ret = mbox_get_by_name(dev, "tx", &zynqmp_power.tx_chan);
if (ret) {
debug("%s: Cannot find tx mailbox\n", __func__);
return ret;
}
ret = mbox_get_by_name(dev, "rx", &zynqmp_power.rx_chan);
if (ret) {
debug("%s: Cannot find rx mailbox\n", __func__);
return ret;
}
ret = zynqmp_firmware_version();
printf("PMUFW:\tv%d.%d\n",
ret >> ZYNQMP_PM_VERSION_MAJOR_SHIFT,
ret & ZYNQMP_PM_VERSION_MINOR_MASK);
return 0;
};
static const struct udevice_id zynqmp_power_ids[] = {
{ .compatible = "xlnx,zynqmp-power" },
{ }
};
U_BOOT_DRIVER(zynqmp_power) = {
.name = "zynqmp_power",
.id = UCLASS_FIRMWARE,
.of_match = zynqmp_power_ids,
.probe = zynqmp_power_probe,
};
#endif
int __maybe_unused xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2,
u32 arg3, u32 *ret_payload)
{
/*
* Added SIP service call Function Identifier
* Make sure to stay in x0 register
*/
struct pt_regs regs;
if (current_el() == 3) {
printf("%s: Can't call SMC from EL3 context\n", __func__);
return -EPERM;
}
regs.regs[0] = PM_SIP_SVC | api_id;
regs.regs[1] = ((u64)arg1 << 32) | arg0;
regs.regs[2] = ((u64)arg3 << 32) | arg2;
smc_call(&regs);
if (ret_payload) {
ret_payload[0] = (u32)regs.regs[0];
ret_payload[1] = upper_32_bits(regs.regs[0]);
ret_payload[2] = (u32)regs.regs[1];
ret_payload[3] = upper_32_bits(regs.regs[1]);
ret_payload[4] = (u32)regs.regs[2];
}
return regs.regs[0];
}
static const struct udevice_id zynqmp_firmware_ids[] = {
{ .compatible = "xlnx,zynqmp-firmware" },
{ .compatible = "xlnx,versal-firmware"},
{ }
};
U_BOOT_DRIVER(zynqmp_firmware) = {
.id = UCLASS_FIRMWARE,
.name = "zynqmp-firmware",
.of_match = zynqmp_firmware_ids,
};