Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-05 20:54:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/bachmann/ot1200
History
Simon Glass 10e40d54b3 Kconfig: Add CONFIG_SATA to enable SATA 
At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
..
Kconfig mx6: remove SYS_SOC from board Kconfig 2015-09-13 10:37:29 +02:00
MAINTAINERS imx6: add Bachmann OT1200 board 2014-10-06 17:24:28 +02:00
Makefile ot1200: add basic SPL support 2015-01-22 11:03:19 +01:00
mx6q_4x_mt41j128.cfg ot1200: move ccgr and gpr init to c functions 2015-01-22 11:03:19 +01:00
ot1200.c Kconfig: Add CONFIG_SATA to enable SATA 2017-07-11 10:08:19 -06:00
ot1200_spl.c mx6: ddr: Allow changing REFSEL and REFR fields 2016-09-06 18:22:48 +02:00
README imx6: add Bachmann OT1200 board 2014-10-06 17:24:28 +02:00

README 

U-Boot for the Bachmann electronic GmbH OT1200 devices

There are two different versions of the base board, which differ
in the way ethernet is done. The variant detection is done during
runtime based on the address of the found phy.

- "mr" variant
FEC is connected directly to an ethernet switch (KSZ8895). The ethernet
port is always up and auto-negotiation is not possible.

- normal variant
FEC is connected to a normal phy and auto-negotiation is possible.


The variant name is part of the dtb file name loaded by u-boot. This
make is possible to boot the linux kernel and make use variant specific
devicetree (fixed-phy link).

In order to support different display resoltuions/sizes the OT1200 devices
are making use of EDID data stored in an i2c EEPROM.