mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
d17d051c54
On boards using the AXP313 PMIC, the DRAM rail is often not setup correctly at reset time, so we have to program the PMIC very early in the SPL, before running the DRAM initialisation. Add a simple AXP313 PMIC driver that knows about DCDC2(CPU) and DCDC3(DRAM), so that we can bump up the voltage before the DRAM init. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
137 lines
2.8 KiB
C
137 lines
2.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* Sunxi PMIC bus access helpers
|
|
*
|
|
* The axp152 & axp209 use an i2c bus, the axp221 uses the p2wi bus and the
|
|
* axp223 uses the rsb bus, these functions abstract this.
|
|
*/
|
|
|
|
#include <axp_pmic.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/arch/p2wi.h>
|
|
#include <asm/arch/rsb.h>
|
|
#include <i2c.h>
|
|
#include <power/pmic.h>
|
|
#include <asm/arch/pmic_bus.h>
|
|
|
|
#define AXP152_I2C_ADDR 0x30
|
|
|
|
#define AXP209_I2C_ADDR 0x34
|
|
|
|
#define AXP305_I2C_ADDR 0x36
|
|
#define AXP313_I2C_ADDR 0x36
|
|
|
|
#define AXP221_CHIP_ADDR 0x68
|
|
|
|
#if CONFIG_IS_ENABLED(PMIC_AXP)
|
|
static struct udevice *pmic;
|
|
#else
|
|
static int pmic_i2c_address(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_AXP152_POWER))
|
|
return AXP152_I2C_ADDR;
|
|
if (IS_ENABLED(CONFIG_AXP305_POWER))
|
|
return AXP305_I2C_ADDR;
|
|
if (IS_ENABLED(CONFIG_AXP313_POWER))
|
|
return AXP313_I2C_ADDR;
|
|
|
|
/* Other AXP2xx and AXP8xx variants */
|
|
return AXP209_I2C_ADDR;
|
|
}
|
|
#endif
|
|
|
|
int pmic_bus_init(void)
|
|
{
|
|
/* This cannot be 0 because it is used in SPL before BSS is ready */
|
|
static int needs_init = 1;
|
|
int ret = 0;
|
|
|
|
if (!needs_init)
|
|
return 0;
|
|
|
|
#if CONFIG_IS_ENABLED(PMIC_AXP)
|
|
ret = uclass_get_device_by_driver(UCLASS_PMIC, DM_DRIVER_GET(axp_pmic),
|
|
&pmic);
|
|
#else
|
|
if (IS_ENABLED(CONFIG_SYS_I2C_SUN6I_P2WI)) {
|
|
p2wi_init();
|
|
ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR,
|
|
AXP_PMIC_MODE_REG,
|
|
AXP_PMIC_MODE_P2WI);
|
|
} else if (IS_ENABLED(CONFIG_SYS_I2C_SUN8I_RSB)) {
|
|
ret = rsb_init();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rsb_set_device_address(AXP_PMIC_PRI_DEVICE_ADDR,
|
|
AXP_PMIC_PRI_RUNTIME_ADDR);
|
|
}
|
|
#endif
|
|
|
|
needs_init = ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
int pmic_bus_read(u8 reg, u8 *data)
|
|
{
|
|
#if CONFIG_IS_ENABLED(PMIC_AXP)
|
|
return pmic_read(pmic, reg, data, 1);
|
|
#else
|
|
if (IS_ENABLED(CONFIG_SYS_I2C_SUN6I_P2WI))
|
|
return p2wi_read(reg, data);
|
|
if (IS_ENABLED(CONFIG_SYS_I2C_SUN8I_RSB))
|
|
return rsb_read(AXP_PMIC_PRI_RUNTIME_ADDR, reg, data);
|
|
|
|
return i2c_read(pmic_i2c_address(), reg, 1, data, 1);
|
|
#endif
|
|
}
|
|
|
|
int pmic_bus_write(u8 reg, u8 data)
|
|
{
|
|
#if CONFIG_IS_ENABLED(PMIC_AXP)
|
|
return pmic_write(pmic, reg, &data, 1);
|
|
#else
|
|
if (IS_ENABLED(CONFIG_SYS_I2C_SUN6I_P2WI))
|
|
return p2wi_write(reg, data);
|
|
if (IS_ENABLED(CONFIG_SYS_I2C_SUN8I_RSB))
|
|
return rsb_write(AXP_PMIC_PRI_RUNTIME_ADDR, reg, data);
|
|
|
|
return i2c_write(pmic_i2c_address(), reg, 1, &data, 1);
|
|
#endif
|
|
}
|
|
|
|
int pmic_bus_setbits(u8 reg, u8 bits)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = pmic_bus_read(reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if ((val & bits) == bits)
|
|
return 0;
|
|
|
|
val |= bits;
|
|
return pmic_bus_write(reg, val);
|
|
}
|
|
|
|
int pmic_bus_clrbits(u8 reg, u8 bits)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = pmic_bus_read(reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(val & bits))
|
|
return 0;
|
|
|
|
val &= ~bits;
|
|
return pmic_bus_write(reg, val);
|
|
}
|