u-boot/nand_spl/board/freescale/p1010rdb/nand_boot.c
Dipen Dudhat d793e5a840 powerpc/85xx: Add NAND/NAND_SPL support to P1010RDB
And various defines to enable NAND support and NAND spl code for the
P1010RDB platform.

Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-29 19:01:04 -05:00

130 lines
4.1 KiB
C

/*
* Copyright 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include <mpc85xx.h>
#include <asm/io.h>
#include <ns16550.h>
#include <nand.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_law.h>
#define udelay(x) { int j; for (j = 0; j < x * 10000; j++) isync(); }
unsigned long ddr_freq_mhz;
void sdram_init(void)
{
ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE);
out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
if (ddr_freq_mhz < 700) {
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_667);
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_667);
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_667);
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_667);
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_667);
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_667);
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_667);
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_667);
out_be32(&ddr->ddr_wrlvl_cntl,
CONFIG_SYS_DDR_WRLVL_CONTROL_667);
} else {
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_800);
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_800);
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_800);
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_800);
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_800);
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_800);
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_800);
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_800);
out_be32(&ddr->ddr_wrlvl_cntl,
CONFIG_SYS_DDR_WRLVL_CONTROL_800);
}
out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL);
/* mimic 500us delay, with busy isync() loop */
udelay(100);
/* Let the controller go */
out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1);
}
void board_init_f(ulong bootflag)
{
u32 plat_ratio, ddr_ratio;
unsigned long bus_clk;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
/* initialize selected port with appropriate baud rate */
plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
bus_clk / 16 / CONFIG_BAUDRATE);
puts("\nNAND boot... ");
/* Initialize the DDR3 */
sdram_init();
/* copy code to RAM and jump to it - this should not return */
/* NOTE - code has to be copied out of NAND buffer before
* other blocks can be read.
*/
relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
CONFIG_SYS_NAND_U_BOOT_RELOC);
}
void board_init_r(gd_t *gd, ulong dest_addr)
{
nand_boot();
}
void putc(char c)
{
if (c == '\n')
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
}
void puts(const char *str)
{
while (*str)
putc(*str++);
}