mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
236609d93c
For some layouts it is necessary to adjust the CK_DELAY parameter to successfully complete DDR training. Add the ability to specify the CK_DELAY in the mv_ddr_topology_map. Signed-off-by: Chris Packham <judge.packham@gmail.com>
207 lines
4.4 KiB
C
207 lines
4.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*/
|
|
|
|
#ifndef _DDR_TOPOLOGY_DEF_H
|
|
#define _DDR_TOPOLOGY_DEF_H
|
|
|
|
#include "ddr3_training_ip_def.h"
|
|
#include "mv_ddr_topology.h"
|
|
#include "mv_ddr_spd.h"
|
|
#include "ddr3_logging_def.h"
|
|
|
|
#define MV_DDR_MAX_BUS_NUM 9
|
|
#define MV_DDR_MAX_IFACE_NUM 1
|
|
|
|
struct bus_params {
|
|
/* Chip Select (CS) bitmask (bits 0-CS0, bit 1- CS1 ...) */
|
|
u8 cs_bitmask;
|
|
|
|
/*
|
|
* mirror enable/disable
|
|
* (bits 0-CS0 mirroring, bit 1- CS1 mirroring ...)
|
|
*/
|
|
int mirror_enable_bitmask;
|
|
|
|
/* DQS Swap (polarity) - true if enable */
|
|
int is_dqs_swap;
|
|
|
|
/* CK swap (polarity) - true if enable */
|
|
int is_ck_swap;
|
|
};
|
|
|
|
struct if_params {
|
|
/* bus configuration */
|
|
struct bus_params as_bus_params[MV_DDR_MAX_BUS_NUM];
|
|
|
|
/* Speed Bin Table */
|
|
enum mv_ddr_speed_bin speed_bin_index;
|
|
|
|
/* sdram device width */
|
|
enum mv_ddr_dev_width bus_width;
|
|
|
|
/* total sdram capacity per die, megabits */
|
|
enum mv_ddr_die_capacity memory_size;
|
|
|
|
/* The DDR frequency for each interfaces */
|
|
enum mv_ddr_freq memory_freq;
|
|
|
|
/*
|
|
* delay CAS Write Latency
|
|
* - 0 for using default value (jedec suggested)
|
|
*/
|
|
u8 cas_wl;
|
|
|
|
/*
|
|
* delay CAS Latency
|
|
* - 0 for using default value (jedec suggested)
|
|
*/
|
|
u8 cas_l;
|
|
|
|
/* operation temperature */
|
|
enum mv_ddr_temperature interface_temp;
|
|
|
|
/* 2T vs 1T mode (by default computed from number of CSs) */
|
|
enum mv_ddr_timing timing;
|
|
};
|
|
|
|
/* memory electrical configuration */
|
|
struct mv_ddr_mem_edata {
|
|
enum mv_ddr_rtt_nom_park_evalue rtt_nom;
|
|
enum mv_ddr_rtt_nom_park_evalue rtt_park[MAX_CS_NUM];
|
|
enum mv_ddr_rtt_wr_evalue rtt_wr[MAX_CS_NUM];
|
|
enum mv_ddr_dic_evalue dic;
|
|
};
|
|
|
|
/* phy electrical configuration */
|
|
struct mv_ddr_phy_edata {
|
|
enum mv_ddr_ohm_evalue drv_data_p;
|
|
enum mv_ddr_ohm_evalue drv_data_n;
|
|
enum mv_ddr_ohm_evalue drv_ctrl_p;
|
|
enum mv_ddr_ohm_evalue drv_ctrl_n;
|
|
enum mv_ddr_ohm_evalue odt_p[MAX_CS_NUM];
|
|
enum mv_ddr_ohm_evalue odt_n[MAX_CS_NUM];
|
|
};
|
|
|
|
/* mac electrical configuration */
|
|
struct mv_ddr_mac_edata {
|
|
enum mv_ddr_odt_cfg_evalue odt_cfg_pat;
|
|
enum mv_ddr_odt_cfg_evalue odt_cfg_wr;
|
|
enum mv_ddr_odt_cfg_evalue odt_cfg_rd;
|
|
};
|
|
|
|
struct mv_ddr_edata {
|
|
struct mv_ddr_mem_edata mem_edata;
|
|
struct mv_ddr_phy_edata phy_edata;
|
|
struct mv_ddr_mac_edata mac_edata;
|
|
};
|
|
|
|
struct mv_ddr_topology_map {
|
|
/* debug level configuration */
|
|
enum mv_ddr_debug_level debug_level;
|
|
|
|
/* Number of interfaces (default is 12) */
|
|
u8 if_act_mask;
|
|
|
|
/* Controller configuration per interface */
|
|
struct if_params interface_params[MV_DDR_MAX_IFACE_NUM];
|
|
|
|
/* Bit mask for active buses */
|
|
u16 bus_act_mask;
|
|
|
|
/* source of ddr configuration data */
|
|
enum mv_ddr_cfg_src cfg_src;
|
|
|
|
/* raw spd data */
|
|
union mv_ddr_spd_data spd_data;
|
|
|
|
/* timing parameters */
|
|
unsigned int timing_data[MV_DDR_TDATA_LAST];
|
|
|
|
/* electrical configuration */
|
|
struct mv_ddr_edata edata;
|
|
|
|
/* electrical parameters */
|
|
unsigned int electrical_data[MV_DDR_EDATA_LAST];
|
|
|
|
/* Clock enable mask */
|
|
u32 clk_enable;
|
|
|
|
/* Clock delay */
|
|
int ck_delay;
|
|
};
|
|
|
|
enum mv_ddr_iface_mode {
|
|
MV_DDR_RAR_ENA,
|
|
MV_DDR_RAR_DIS,
|
|
};
|
|
|
|
enum mv_ddr_iface_state {
|
|
MV_DDR_IFACE_NRDY, /* not ready */
|
|
MV_DDR_IFACE_INIT, /* init'd */
|
|
MV_DDR_IFACE_RDY, /* ready */
|
|
MV_DDR_IFACE_DNE /* does not exist */
|
|
};
|
|
|
|
enum mv_ddr_validation {
|
|
MV_DDR_VAL_DIS,
|
|
MV_DDR_VAL_RX,
|
|
MV_DDR_VAL_TX,
|
|
MV_DDR_VAL_RX_TX
|
|
};
|
|
|
|
struct mv_ddr_iface {
|
|
/* base addr of ap ddr interface belongs to */
|
|
unsigned int ap_base;
|
|
|
|
/* ddr interface id */
|
|
unsigned int id;
|
|
|
|
/* ddr interface state */
|
|
enum mv_ddr_iface_state state;
|
|
|
|
/* ddr interface mode (rar enabled/disabled) */
|
|
enum mv_ddr_iface_mode iface_mode;
|
|
|
|
/* ddr interface base address */
|
|
unsigned long long iface_base_addr;
|
|
|
|
/* ddr interface size - ddr flow will update this parameter */
|
|
unsigned long long iface_byte_size;
|
|
|
|
/* ddr i2c spd data address */
|
|
unsigned int spd_data_addr;
|
|
|
|
/* ddr i2c spd page 0 select address */
|
|
unsigned int spd_page_sel_addr;
|
|
|
|
/* ddr interface validation mode */
|
|
enum mv_ddr_validation validation;
|
|
|
|
/* ddr interface topology map */
|
|
struct mv_ddr_topology_map tm;
|
|
};
|
|
|
|
struct mv_ddr_iface *mv_ddr_iface_get(void);
|
|
|
|
/* DDR3 training global configuration parameters */
|
|
struct tune_train_params {
|
|
u32 ck_delay;
|
|
u32 phy_reg3_val;
|
|
u32 g_zpri_data;
|
|
u32 g_znri_data;
|
|
u32 g_zpri_ctrl;
|
|
u32 g_znri_ctrl;
|
|
u32 g_zpodt_data;
|
|
u32 g_znodt_data;
|
|
u32 g_zpodt_ctrl;
|
|
u32 g_znodt_ctrl;
|
|
u32 g_dic;
|
|
u32 g_odt_config;
|
|
u32 g_rtt_nom;
|
|
u32 g_rtt_wr;
|
|
u32 g_rtt_park;
|
|
};
|
|
|
|
#endif /* _DDR_TOPOLOGY_DEF_H */
|